• Journal of Korean Society of Forest Science
• /
• v.38 no.1
• /
• pp.13-18
• /
• 1978

In this study, enzymatic hydrolysis of the holocellulose from Alnus hirsuta (Spach) Rupr. (8-14 yr's) was investigated using crude cellulase preparations of Trichoderma viride Pers. ex. Fr. SANK 16374. And conducted on the optimum condition of the treated substrate for saccharification. A strain of Trichoderma viride Pers. ex. Fr. SANK 16374 was found to be highly efficient for the cellulase productivity, especially in the submerged culture process. The culture medium used in this experiment was prepared from an extract of wheat bran consisting also of $KH_2PO_410$, $(NH_4)_2$ $SO_4$ 3, $NaNO_3$ 3, and $MgSO_4$ $7H_2O$ 0.5g/l. Cellulose powder (Toyo filter paper, 60 mesh) was found to be an importent factar for inducing the cellulase formation. And the cellulase produced in the culture fluid was salted out quantitatively by the use of ammonium sulfate (Fig. 1) Reducing sugar was determined by the Dinitrosalicylic acid (DNS) method, using reagents prepared according to the method of Sumner (1925). The results obtained were summerized as follows; 1. The method of delignification were treated by the Peracetic acid (PA) method, according to the method of Toyama (1970). The yield of holocellulose were decreased in accordance with increasing concentration of Peracetic acid solution; delignification of Alnus hirsuta Rupr. with 20% Peracetic acid was satisfied for 48 hours and 40%~60% peracetic acid was satisfied for 24 hrs: 2. The substrate (holocellulose) was changed easely into fine powder with enzymatic hydrolysis and cellulase exhibits optimum activity on the reducing sugar formation from substrate at the range of 60-100 mesh. 3. The reducing sugar formation increased in accordance with increasing dry temperature on holocellulose substrate was found to be $190{\pm}5^{\circ}C$. 4. The optimal heat treated time of holocellulose substrate was found to be 45 min. for the reducing sugar formation showed the best products. The reducing sugar formation did not show statisticaly significent diflerences at 5% levels by heat treated time for 45 min. and 60 min.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.1-18
• /
• 1996

There are many advantages when using IIF and DNA probe methods over anaerobic culture method in that they are time-and effort-saving, more precise and more sensitive. Furthermore, in IIF and DNA probe methods, the detection is possible only with small amount of bacteria, the quantitative analysis is possible, and the cell viability is not necessary. The purpose of this study is to observe the incidence of P.endodontalis by carrying out anaerobic culture, IIF and colony lift using DNA probe method respectively, and to compare these 3 methods in terms of effectiveness and sensitivity in order to identify the most effective detection method. 30 teeth with at least one clinical symptoms, with single canal, and with pulp necrosis were sampled. For sampling bacteria, access cavity was prepared after disinfecting tooth and its surroundings. Then the paper point was inserted up to the periapical area, leave there for a while, and finally it was placed into PRAS Ringer's sol. and PBS sol. In anaerobic culture method, P.endodontalis was identified by biochemical tests after subculturing black and brown colonies which were produced after 7 days of incubation on BAP and Brucella BAP in anaerobic chamber. To identify P.endodontalis in IIF method, species-specific polyclonal rabbit-antisera of P.endodontalis(ATCC 35406) was reacted with sampled PBS sol. dispensed onto glass slide, and then P.endodontalis was examined by phase contrast microscopy after incubating with Goat anti-rabbit lgG conjugated to Fluorescein isothiocyanate. For colony lift using DNA probe method, membranes were laid over colonies on the surface of BAP and were hybridized with cloned DNA probe of P.endodontalis. The existence of P.endodontalis was then identified by the methods of chemiluminescent detection and color metric detection. Black colony was found in 11 teeth out of 30 teeth and P.endodontalis was detected in 6 teeth (20 %) by anaerobic culture method, 16 teeth (53 %) by IIF method, and 7 teeth (23 %) by DNA probe method. IIF method is significantly better in detecting P.endodontalis than DNA probe method and anaerobic culture method. There was no significant differences between DNA probe method and anaerobic culture method. There was significant correlation between the formation of black colony and the existence of P.endodontalis. The probability of detecting P.endodontalis when black colony being present is 2.89 times higher than when not being present. There was significant relationship between the foul odor of clinical symptoms and P.endodontalis. The sensitivity of existing P.endodontalis when foul odor being present was 93.75 %, while the specificity of not existing P.endodontalis when foul odor not being present was 28.57 %. These results suggested that the probes of P.endodontalis will be used to decide the method and prognosis in endodontic treatments.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.510-521
• /
• 1998

The effects of two types of protein, soybean meal (SBM) and fish meal (FM); and two types of energy supplements, corn flour (CF) and paper pulp (PP), on intake of guinea grass (Panicum maximum), fibre digestion and microbial activities in four Merino rams with an average weight of $54.4{\pm}4.5kg$ were studied. Each animal was fitted with a ruminal cannula and a duodenal cannula at the proximal position. The animals were fed twice daily with chopped guinea grass (5 cm) ad libitum and one of the four dietary supplements: 170 g FM+268 g PP; 170 g FM+268 g CF; 200 g SBM+200 g PP or 200 g SBM+200 g CF. All the supplements were mixed with 100 g molasses. In sacco and in vivo digestibilities, digesta flow rates, fermentation and microbial population were studied in a $4{\times}4$ Latin square design with a $2{\times}2$ factorial arrangement of dietary treatments. The effects of energy or protein sources were not significant on grass intake of sheep. The potential degradabilities of NDF and ADF were not significantly affected by any of the supplements. However, the energy and protein sources had significant efects on disappearance rate of NDF and ADF. The disappearance rate of both NDF and ADF were significantly (p < 0.05) higher in animals fed PP when compared to animals fed CF. Animals fed FM also showed significantly (p < 0.03) higher disappearance rate of ADF than those fed SBM. Animals fed PP showed better digestion in the rumen and total tract. Total flow of NDF and ADF through the duodenum was not significantly affected by the various supplements. The mean rumen pH values (5.8-6.1) were not significantly different among the four different diets. The concentration of rumen ammonia was significantly (p < 0.0001) higher in animals fed SBM (235-266.4 mg N/L) supplement than in animals fed FM (174.9-179.7 mg N/L), while total VFA concentration was not significantly affected by both energy and protein supplements. Mean values of total VFA ranged from 72.5-82.3 mM. Molar proportions of acetate, propionate and butyrate were typical of a roughage type fermentation. Molar proportion of acetate was significantly (p < 0.0001) higher in sheep fed PP when compared to sheep fed CF. Animals fed FM had higher total viable bacterial counts, while animals fed CF showed higher protozoal numbers. Proportions of cellulolytic bacteria were only slightly higher in animals fed SBM or PP.

• Journal of Korean Society of Forest Science
• /
• v.76 no.3
• /
• pp.249-255
• /
• 1987

Forestry as with all land matters, under the Constitution, is a State matter. Thus the States, numbering 14, have considerable autonomy in decisions on forestry and related matters. However, the Federal Government, having jurisdiction over such issues as defence, education and research, endeavours to coordinate, standardise and advise the States on matters where the States have jurisdiction. However, forestry being a major revenue earner, is jealously guarded by the States. Under such circumstances and recognising the interdependencies of impacts of decisions at the State level, the institutional organisations play an important role in coordinating state activities to ensure that the benefits to the country as a whole are not sacrificed in favour of interests of individual state. Various legislative mechanisms have been established to ensure this coordinated effort. A National Forestry Council forms the apex of national political coordination. The Federal Forestry Department is responsible for coordination of developmental activities at the State level, which are implemented be the State Forestry Departments within Peninsular Malaysia. Research is carried out centrally by the Forest Research Institute of Malaysia(FRIM), a statutory body formed in 1985 from a research division of the Forestry Department. The Stares of Sabah and Sarawak have their own Forestry Departments, independent of the Federal Department, and each with its own research unit independent of FRIM. Tertiary education in forestry is the sole responsibility of the Agricultural University at Serdang with a campus for Diploma level training in Sarawak. In the developmental area in the State of Sabah, institutions have been formed to focus on specific areas of activities. The Sabah Foundation is responsible for the long term development of the State forests with a concession of about one million ha. Sabah Forest Development Authority(SAFODA) was formed to carry out reforestation of denuded areas. Sabah Forest Industries Ltd.(SFI) is responsible for the country's only integrated pulp and paper industry with its own afforestation program to support its resource supply. In Peninsular Malaysia various states have established State Corporations to manage large "sustained yield" concessions. While wildlife and state parks are managed by the respective forestry departments in Sabah and Sarawak, it is the responsibility of a separate department in Peninsula Malaysia called the Department of Wildlife and National Parks(under the Ministry of Science, Technology and Environment). Timber trade legislation and promotion in the Peninsular is the responsibility of the Malaysian Timber Industries Board(MTIB) for Peninsular Malaysia and the Sarawak Timber Industries Development Corporation(STIDC) in Sarawak. In the area of NGOs ; the Institute of Foresters Malaysia, is the professional body of forestry in the country. A Malaysian Forestry Society caters for the public participation and interest. Other environmentally related NGOs such as the Malayan Nature Society, the Environmental Protection Society, World Wildlife Fund, Friends of the Earth and the Consumers Associations also involve themselves in specific forestry activities. A number of timber trade associations are also formed by the private sector to assist the industries.

• Restorative Dentistry and Endodontics
• /
• v.36 no.3
• /
• pp.180-187
• /
• 2011

Introduction: Eliminating the residual debris and bacteria in the root canal system is one of the main purposes of the endodontic treatment. However, the complexity on the anatomy of the root canal system makes it difficult to eliminate the bacterial biofilm existing along the root canal surface and necrotic pulp tissue by mechanical instrumentation and chemical irrigation. Recently, more effective irrigant delivery systems for root canal irrigation have been developed. The purpose of this review was to present an overview of root canal irrigant delivery techniques and devices available in endodontics. Review: The contents of this paper include as follows; - syringe-needle irrigation, manual dynamic irrigation, brushes - sonic and ultrasonic irrigation, passive ultrasonic irrigation, rotary brush, RinsEndo, EndoVac, Laser Conclusion: Though technological advances during the last decade have brought to fruition new agitation devices that rely on various mechanisms, there are few evidence based study to correlate the clinical efficacy of these devices with improved outcomes except syringe irrigation with needle and ultrasonic irrigation. The clinicians should try their best efforts to deliver antimicrobial and tissue solvent solutions in predictable volumes safely to working length.

• Journal of Korean Society of Forest Science
• /
• v.109 no.1
• /
• pp.81-98
• /
• 2020

In this study, forest-related research papers published in North Korean journals were analyzed to understand the research trends in North Korean forest science. The Korea Science and Technology Information Institute (KISTI) North Korea Science and Technology Network (NKtech) is constructing a database related to science and technology in North Korea. From this, a total of 1,389 articles published from 1962 to 2016 were collected with forest science key words based on the South Korean National Science and Technology Standard Classification System. The topics were divided into four categories: afforestation, forest protection, forest use, and forest management. In the field of afforestation, research activities on nursery and agroforestry were active, and the survival rate was emphasized. In the forest protection field, there was a significant research effort into forest pests, and efforts were being made to reduce soil erosion through agroforestry. In the field of forest use, research activities on pulp/paper and mushrooms were active. In the forest management field, activities related to "ecological information" were conspicuous, and efforts were being made to reduce carbon. These results suggest that the perspective of North Korean forest research has changed from nature reorganization to nature protection. Thus, a comparative study on forest science and technology in each sub-sector of the forest research field, along with analysis of the relationship between policy direction and research direction of North Korea over time, would be worthwhile future investigations. To overcome the problem of technical terminology, a compilation/dictionary of inter-Korean forestry terminology would be useful for effective communication between the two Koreas.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.06a
• /
• pp.135-153
• /
• 1998

Nanofiltration (NF) is a recently introduced term in membrane separation. In 1988, Eriksson was one of the first authors using the word 'nanofiltration' explicitly. Some years before, FilmTech started to use this term for their NF50 membrane which was supposed to be a very loose reverse osmosis membrane or a very tight ultrafiltration membrane. Since then, this term has been introduced to indicate a specific boundary of membrane technology in between ultrafiltration and reverse osmosis. The application fields of the NF membranes are very broad as follows: Demeneralizing water, Cleaning up contaminated groundwater, Ultrapure water production, Treatment of effleunts containing heavy metals, Offshore oil platforms, Yeast production, Pulp and paper mills, Textile production, Electroless copper plating, Cheese whey production, Cyclodextrin production, Lactose production. The earliest NF membrane was made by Cadotte et al, using piperazine and trimesoyl chloride as monomers for the formation of polyamide active layer of the composite type membrane. They coated very thin interfacially potymerized polyamide on the surface of the microporous polysulfone supports. The NF membrane exhibited low rejections for monovalent anions (chloride) and high rejections for bivalent anions (sulphate). This membrane was called NS300. Some of the earliest NF membranes, like the NF40 membrane of FilmTech, the NTR7250 of Nitto-Denko and the UTC20 and UTC60 of Toray, are formed by a comparable synthesis route as the NS300 membrane. Commercially available NF membranes nowadays are as follows: ASP35 (Advanced Membrane Technology), MPF21; MPF32 (Kiryat Weizmann), UTC20; UTC60; UTC70; UTC90 (Toray), CTA-LP; TFCS (Fluid Systems), NF45; NF70 (FilmTec), BQ01; MX07; HG01; HG19; SX01; SX10 (Osmonics), 8040-LSY-PVDI (Hydranautics), NF CA30; NF PES 10 (Hoechst), WFN0505 (Stork Friesland). The typical ones among the commercially available NF membranes are polyamide composite membrane consisting of interfacially polymerized polyamide active layer and microporous support. While showing high water fluxes and high rejections of multivalent ions and small organic molecules, these membranes have relatively low chemical stability. These membranes have low chlorine tolerance and are unstable in acid or base solution. This chemical instability is appearing to be a big obstacle for their applications. To improve the chemical stability, we have tried, in this study, to prepare chemically stable NF membranes from PVA. The ionomers and interfacially polymerized polyamide were used for the modification of'the PVA membranes. For the detail study of the active layer, homogeneous NF membranes made only from active layer materials were prepared and for the high performance, composite type NF membranes were prepared by coating the active layer materials on microporous polysulfone supports.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.48-67
• /
• 2013

This study was focused on the recognition of historical values and the establishment of conservation schemes for a Silla stone monument in Bongpyeong-ri, Uljin by combining the humanistic investigation of inscription reinterpretation and the scientific conservational diagnosis of deterioration. According to the investigation of inscription, a total of 13 letters were reconsidered compared to the preceding researches. Thus, the meaning and interpretation of previous inscription was partially changed. This monument is composed of gneissose leucogranite and the most suitable site as provenance of the stone would be the Jukbyeon seashore (2.1km). The site shows similar color, size and composition of minerals, gneissose structure and magnetic susceptibility as the Bongpyeong stone monument. This monument developed a structural crack (crack index 0.4) and a microcrack (crack index 2.0) along the gneissose structure. The horizontal strength is weaker than the vertical strength. Therefore, the cracks should be reinforced and treated. However, consolidating is not urgently needed because the total weathering grade by ultrasonic velocity shows the stage of moderate weathering(3,403m/s, 0.32). Also, the major problems of chemical deterioration are blackening (85.2%) with soil, iron oxide,rubbing mark, and salt crystals (17.3%) from the sea. Therefore, the contaminants and the salt crystals should be removed using pressure spray and pulp paper, while the application of poultice should be examined through clinical tests.

• Clean Technology
• /
• v.27 no.2
• /
• pp.190-197
• /
• 2021

Kraft lignin is a by-product of the pulp and paper industry, obtained as a black liquor after the extraction of cellulose from wood through the Kraft pulping process. Right now, kraft lignin is utilized as a low-grade boiler fuel to provide heat and power but can be converted into high-calorific biofuels or high-value chemicals once the efficient catalytic depolymerization process is developed. In this work, the multi-functional catalyst of Ru-Mg-Al-oxide, which contains hydrogenation metals, acid, and base sites for the effective depolymerization of kraft lignin are prepared, and its lignin depolymerization efficiency is evaluated. In order to understand the role of different active sites in the lignin depolymerization, the three different catalysts of MgO, Mg-Al-oxide, and Ru-Mg-Al-oxide were synthesized, and their lignin depolymerization activity was compared in terms of the yield and the average molecular weight of bio-oil, as well as the yield of phenolic monomers contained in the bio-oil. Among the catalysts tested, the Ru-Mg-Al-oxide catalyst exhibited the highest yield of bio-oil and phenolic monomers due to the synergy between active sites. Furthermore, in order to maximize the extent of lignin depolymerization over the Ru-Mg-Al-oxide, the effects of reaction conditions (i.e., temperature, time, and catalyst loading amount) on the lignin depolymerization were investigated. Overall, the highest bio-oil yield of 72% and the 3.5 times higher yield of phenolic monomers than that without a catalyst were successfully achieved at 350 ℃ and 10% catalyst loading after 4 h reaction time.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.21 no.1
• /
• pp.19-26
• /
• 2015

The carton for liquid products are divided into 'gable top carton' and 'aseptic carton'. Currently, these packages are being recycled in the toilet tissue manufacturing process. The recycling of the carton aluminium laminate is the most important problem facing the recycling procedure of the carton packages due to the reduction in quality of recycled materials. The polymer structure with synthetic resins being used mainly in beverage packaging is also one of the important factors for the procedure for its recycling. The objective of this study was to investigate the package material and structure of the carton for liquid products through marketing research and suggest the supplementation in the work processes of production, use, and recycling. The results represent to improve the recycling profit and the quality of recycled materials when a laminated aluminium of carton for liquid products is replaced to the transparent polymer film. The improvement of the sorting and recycling process may help their recycling efficiencies. In addition, the limited use of synthetic resin molded packaging and increase of wood-pulp collection rate will provide the improvement of the recycling profit and the quality of recycled materials.