• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.3
• /
• pp.15-21
• /
• 1998

Crude enzymes of Trichoderma viride and Phanerochaete chrysosporium were evaluated for their effect to brightness and physical properties of recycled pulp from newspaper and corrugated container board. The brightness of recycled pulp from newspaper increased with crude enzymes from Trichoderma viride and Phanerochaete chrysosporium. The brightness of recycled pulp of corrugated container board increased with crude enzyme from Phanerochaete chrysosporium, but decreased with crude enzyme from Trichoderma viride. The Δbrightness with chemical bleaching of crude enzyme treated pulp was lower than that of heat killed enzyme treated pulp, but the final brightness of pulp was increased. Modification of recycled paper with crude enzymes can result in a substantial increase in physical properties with little no loss in pulp freeness.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.3
• /
• pp.56-62
• /
• 2012

Recycled pulp therefore play a very important role in the paper industry today as a substitute for virgin pulp. In many countries of the world, the paper industry could not exist as it does without recycled pulp. Because, this is mainly due to economic reasons. Particularly in our country, the additional reason is the scarcity of native pulpwood resources. Therefore, the use of recycled pulp is very important. This study was aimed to apply recycled pulp to textbook paper. So we made a paper containing 30% recycled pulp and investigated about print quality, such as color reproduction, trapping, contrast, dot gain, gloss and print through. The results showed that is similar to existing textbook papers.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.4
• /
• pp.49-54
• /
• 2001

This study was carried out to acquire basic data for the bleaching of bamboo chemical pulp. Bamboo chemical pulps (alkaline sulfite (AS)-anthraquinone (AQ) pulp, Kraft pulp) were bleached with two kinds of multistage bleaching methods (CEDED, PDED) using the various kinds of bleaching agents. And, physical properties of bleached pulps were investigated. The conclusions obtained from the results were as follows; The yield of AS-AQ pulp bleached with four-stages bleaching method using the hydrogen peroxide and chlorine dioxide as a bleaching agents was higher than the other bleached pulps. The brightness of kraft pulp bleached with five-stages bleaching method using the chlorine and chlorine dioxide as a bleaching agents was higher than the other bleached pulps. The physical properties of kraft pulp bleached with four-stages bleaching method using the hydrogen peroxide and chlorine dioxide as a bleaching agents was higher than the other bleached pulps.

• Restorative Dentistry and Endodontics
• /
• v.6 no.1
• /
• pp.71-75
• /
• 1980

The purpose of this study was to determine the close relation between clinical symptom and histopathologic finding in pulp. 20 samples of pulp tissue were collected from badly decayed teeth with considerable pulp vitality. Hemogram was also made with the first drop of bleedieg after total pulp extirpation (10cases) and vital pulpotomy(10cases). Histologic specimen was made routinely with extirpated pulp and stained by H&E and P.A.S. Stains. The results under microsopic examination were as follows; 1. Hemogram obtained from dental pulp with acute inflammation revealed increase of polymorphonuclear leukocyte in number, more lymphocytes and monocytes. 2. Hemogram from pulp with chronic inflammation shown the number of lymphocyte and monocyte was remarkably increased. 3. Histologi specimen obtained from teeth with severe clinical symptome showed polymorphonuclear leukocyte infiltration and the hemogram also showed polymorphonuclear leukocytes. 4. Specimen from teeth with moderate symptom showed lymphocyte infiltration and vessel dilatation underneath decayed area. Erythrocytes were massively accumulated inside of the vessel wall.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.355-357
• /
• 2006

The application of specialty chemicals in a pulp mill system for the purpose of problem solving or process enhancement is often demonstrated and supported by data produced in laboratory testing. Hercules Chemical Solutions Pte Ltd., a major specialty chemical supplier to the Asian pulp and paper industry, partnered with the Asian Institute of Technology (AIT) on several occasions to provide insight into the efficacy of proposed chemical treatments designed for local operating conditions and wood species. This paper presents an example of a chemically-assisted deresination project. The resulting surfactant chemistry proved to be a superior deresinator for plantation grown acacia wood and has been successfully implemented in an Asian pulp and paper mill.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.8-16
• /
• 2001

To manufacture toilet tissue with ONP (old newspaper), the effect of fractionation fiber (R150, R100, R70 mesh) and bleaching(P, PY), blending (70/30) with MOW(mixed office wastepaper) or WL(white ledger) and the addition of softener on the optical and mechanical properties were studied. Considering the pulp yield, brightness and strengths, fibers of R100 mesh fraction were proper to be produced to toilet paper from ONP. This pulp showed the pulp yield of 76.8%, brightness of 50.2% ISO and tensile index of 21.1 Nm/g. By the bleach with P and PY stages, the brightness of the pulps increased up to 60.3% ISO and 61.8% ISO, respectively. When blended with MOW (57.3% ISO) or WL (76.2% ISO), the brightness of the former increased up to 58.5% ISO, the latter up to 63.6% ISO. The strengths of pulp blended with WL were higher than those of fractionated pulp from 100% ONP, however there was no difference in strengths between fractionated pulp and blended pulp wth MOW. While the addition of softener improved the softness of paper, but it decreased strengths of pulp and extended dispersing time in water.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.44-50
• /
• 2016

As a raw material for pulp and paper industry, Moso bamboo, Timber bamboo and Henon bamboo pulps were prepared by soda or soda-anthraquinone(Soda-AQ) pulping process. Soda-AQ pulp yields was higher in Henon bamboo (43.2%) than in Moso bamboo or Timber bamboo (32.7-39.2%), but quite lower than hardwood species. In Kappa number comparison, Henon bamboo pulp showed lower (16.6) with 50 min cooking to $170^{\circ}C$ than that of Moso bamboo (22.8) and Timber bamboo (18.9) with 90 min cooking to $170^{\circ}C$. Fiber length of Timber bamboo soda pulp had higher (1.46 mm) than that of Moso bamboo or Henon bamboo (1.18-1.36 mm). All three bamboo pulps showed longer average fiber length than commercial hardwood pulp. With higher pulp yield and lower Kappa number, Henon bamboo is better raw material for pulp than Moso bamboo and Timber bamboo.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.4
• /
• pp.53-60
• /
• 2007

LbL multilayering technology introduced by Decher is a nano technique that a substrate surface is layered by the successive deposition of polyelectrolytes with positive and negative charge. We investigated the electrochemical properties of LbL multilayered pulp fibers with poly-DADMAC and PSS. Three types of pulp-Hw-BKP, BCTMP and KOCC- were treated with polyelectrolytes. Zeta potentials of multilayered fibers ranged from +30 mV to +40 mV, depending on the intial zeta potential of pulp fibers and fines content. All kinds of pulp which were examined in this study, however, showed a similar zeta potential of -35 mV after layering with PSS. To obtain pulp fiber with a uniform and stable zeta potential, BCTMP and KOCC pulp fibers should be multilayered above 5 times. The addition level of polyelectrolytes had little influence on the zeta potential of pulp fibers.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.168-179
• /
• 1982

The first step to utilize the growing resources of Italian poplar (Populus euramericana I-476) for pulp-Woods, its characteristics and adaptabilities to the pulp industry must be investigated completely. The plantation methods are important for its fast growing in stock, and no less important is the cutting age for its utilization as pulpwood. In this paper, the stone groundwood pulping, refiner groundwood pulping and chemi-groundwood pulping characteristics by the age of tree, along with their physical and chemical characterstics were tested, and relationships between the age groups were analyzed to find out the optimum felling age. The results obtained are as follows: 1. The coefficient of pliability was a little higher in the case of younger trees. 2. The water retention value of each pulp was directly proportional to its physical strength, but this tendency was not detected between the age groups of sample woods. 3. Generally, the physical strength of younger wood pulp was lower regardless of the pulping process. But in the case of pretreatment with NaOH, Asphund and CGP pulp from 5 year old sample wood were stronger in physical strengths than those of GP and Asplund pulp with no pretreatment from 10 years old sample wood. 4. The tear factor of Asplund pulp with alkali pretreatment was higher than that of CGP pulp but the breaking length and the burst factor was similar in all processes. Considering the pulp yield and its brightness, CGP process seems to be advantageous. 5. The dissimilarity of physical strength between 7 and 10 years old wood pulp was not very large in all pulping processes but the physical strength of 5 year old wood pulp was very weak. In the of groundwood pulping from Italian poplar woods, 5 year old wood pulp should be mixed with other long fiber pulp for making a good paper.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.1
• /
• pp.75-83
• /
• 2015

The applicability of oil palm biomass, EFB(Empty Fruit Bunch) as raw materials for environmental friendly packaging material, pulp mold, was evaluated in this study. The changes in the water absorption properties of pulp mold by the addition of EFB and the surface treatments with PVA and AKD were analyzed by measuring the changes in the water absorption rate and the water contact angle. The each pulp mold sample was prepared by using laboratory wet pulp molder. And the water absorption rate of each samples were evaluated by measuring times for the absorption of a 0.1 ml water drop on the pulp mold sample surface. The addition of EFB to the pulp mold made of OCC resulted in the decrease of water absorption rate and the increase in the water contact angle. The surface treatments with PVA and AKD on the OCC pulp mold showed the significant reduction in the water absorption rate. However, in case of ONP pulp mold, the addition of EFB and the surface treatments with PVA and AKD showed no big changes in water absorption times. Those might be come from the finer surface structure of ONP pulp mold which were made of more finer and flexible fibers and more hydrophilic fibers. The results of this study showed the functional properties such as water absorption rate, could be controlled by the application of EFB and the treatments with AKD or PVA, especially in case of the OCC pulp mold.