• Journal of Korean Society of Steel Construction
• /
• v.28 no.3
• /
• pp.139-149
• /
• 2016

Roof cladding of buildings are required for the measures about the 'screw pull-out' which causes the casualties and the property damage by typhoons. In this study, the pull-out resistance was increased by increasing the penetration depth of the screw installing a ironware called 'insert nut' on the roof cladding frame. Tensile tests were conducted to compare the pull-out strengths of a general screw-joint and a nut insert joint. Roof cladding that is actually being used in the field was produced using the 'solid work' and then the roof claddings using a general screw-joint and a nut insert joint were compared by a static test and dynamic test.

• Journal of Korean Society of Steel Construction
• /
• v.30 no.2
• /
• pp.105-114
• /
• 2018

The use of post installed anchors with bond type has lately been increasing when it is necessary to repair, reinforce, or remodel structures. This method provides flexibility and simplicity for construction of structural members that require adhering or fixing. Meanwhile, strength evaluation of anchors with expansion type among post-installed anchors systems has nearly reached setting up stage like design code through continual experimental studies for the last ten years, but analyses or experimental studies on anchor system with bond type are not yet sufficient. Accordingly, the designers and builders of korea depend on foreign design codes since there are no exact domestic design code they could credit. In this study, the objectives are investigating the effects on pull-out strength of resin anchors embedded into plain concrete by pull-out experiment of resin anchors with variables such as anchor diameter, anchor interval, embedment depth and edge distance.

• Journal of Digital Convergence
• /
• v.16 no.2
• /
• pp.127-137
• /
• 2018

As the next generation technology, leading 4th industrial revolution has been progressed, the goods and services converged by the technology are being released in a market. The smart appliances among them attracts users' attentions as a key promising industry. Thus, this study investigates the factors that influence switching intention to smart appliances based on Push-Pull-Mooring framework. We collected 217 survey responses and formed structural equation modeling with AMOS 22.0. The results show that functional deprivation, money deprivation, alternative attractiveness had an effect on the switching intention to smart appliances. In addition, low switching cost is related to the relationship between external variables and switching intention. The results expect to provide useful information to the smart appliance-related companies.

• Journal of Korean Society of Rural Planning
• /
• v.17 no.4
• /
• pp.1-11
• /
• 2011

This study analyzed push, pull motivation factors and satisfaction of visitors who visited Yangdong village in order to maintain, conserve and seek for effective utilization of this village. The result of this study was summarized as follows. Firstly, the result was that 'personal relations' has a positive impact on 'regional environment' and 'amenities', 'the pursuit of knowledge' has a positive impact on 'regional environment' and 'amenities' on the correlation between the visit motivation and the visit satisfaction. Secondly, 'the pursuit of knowledge' and 'the desire to new experience' have positive impact on the visit satisfaction on a part of the push factor generally. Physical environment was a only factor that has a positive impact on the visit satisfaction on a part of the pull factors. Thirdly, the intention of recommendation was a only factor to has a positive impact on the visit satisfaction on the correlation between the intention of return visit, recommendation and the visit satisfaction. It was proved that the intention of return visit was strongly associated with the intention of recommendation. This result of this study confirmed the important pull and push factor to enhance the tourist attraction of Yangdong village. It will be helpful to make the preliminary data for planning and conservation guidance of traditional village.

• KIEAE Journal
• /
• v.13 no.1
• /
• pp.141-150
• /
• 2013

As longevity of human-beings is extended and the population of aged people increases, diverse issues related with the aged people are presented. The neighborhood space for the aged people is required to be designed based upon the understanding of such difficulties of the elderly and the public outdoor environment is an important environmental resource that can enhance the quality of life and promote the health of the elderly in underprivileged area without burdening them economically. This study aims to research the daily life of the elderly in underprivileged urban area and their utilization styles of outdoor environments in order to find out the push factors and pull factors that induce the aged people to use the outdoor environments. For this purpose, this study carried out an interview survey upon 69 elderly residents and surveyed on 363 elderly residents of low income class who are aged 60 and over and living in decaying area in Jeonju. For the analysis of the collected data, a qualitative and a quantitative analysis were accomplished. As results of study, the elderly in underprivileged area use such outdoor environments as resting facilities, exercise equipment, parks, farming gardens and waterfronts, and the push factors for them to use the outdoor environments were sordid indoor spaces, sense of isolation or loneliness, and the desire for maintaining good health. And the pull factors for them to use the outdoor environments were natural factors, opportunities for social interactions, space for exercise. The obstacles that hinder the elderly in using outdoor environments were the bad health of the elderly, lack of facilities, accessibility and weather conditions. Thus, the results of this study are expected to provide basic data for designing the outdoor environments to promote the health of the elderly in urban underprivileged area and to relieve the burdensome problems related with ageing societies.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.3
• /
• pp.81-89
• /
• 2010

The research on peer-to-peer streaming schemes has largely focused on tree-push and mesh-pull structures. However, the tree-push structure has a defect that the tree restructuring time is long, and the mesh-pull structure has long startup delay and lag time from source servers. In this paper, we propose a new peer-to-peer live streaming scheme based on a push-mesh structure that takes advantages of tree-push and mesh-pull structure simultaneously. This structure basically provides the mesh-pull mechanism for data transmission and utilizes peers with high network upload capacity. It also supports the push mechanism along with paths from a source server, super peers, and selected general peers. By NS-2 simulation experiments, we finally show that our proposed scheme can achieve shorter startup delay than the mesh-pull structure, similar lag time to tree-push structure and best playback continuity among the three schemes.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.19-22
• /
• 1995

A biomechanical study was made to demonstrate the superior mechanical performance of the newly designed Miniplate staple to the conventional Coventry staple in high tibial osteotomy(HTO). Using twenty fresh porcine tibiae, the fixational strengh of the two different types of staple in HTO was compared. To minimize the error due to the specimen-to-specimen individuality, the bone mineral density of the tibiae was measured with a bone densitometry (Dual photon absorptionometer, Luner, USA) and those with $0.8\;{\sim}\;1.2\;gm/cm^2$ at the proximal tibia was used in the biomechanical test. Testing was performed on a material testing system (Autogram ET-5, Shimatzu, Japan) with aid of a commercial data processor (IBM 80386/ ASYST). Using two differant loading modes, 'pull-out' and 'push-out', the maximum resistant force required to release the staple from the substrate bone was recorded. In the pull-out test, ten non-osteotomized specimens were used and the staple was pullout by subjecting an axial tension on the head of the staple inserted. While in the pull-out test where ten tibiae osteotomized in the usual way of HTO were used, the staple was not directly loaded. In this testing, as a mimic condition of the natural knee, the distal part of the specimen tibia was pushed horizontally in order for the staple to be pulled out while the proximal tibia was fixed. The pull-out strength of Coventry staple and miniplate staple were found to be $27.88\;{\pm}\;5.12\;kgf$ and $182.47\;{\pm}\;32.75\;kgf$, respectively. The push-out strength of Coventry staple and miniplate staple were $18.40\;{\pm}\;4.47\;kgf$ and $119.95\;{\pm}\;19.06\;kgf$, respectively. The result revealed that miniplate staple had the pull-out/ push-out strength at least fivetimes higher than Coventry staple. Based on the measured data, it was believed that the newly designed miniplate staple could provide much better postoperative fixation in HTO. The postoerative application of long leg casting may not be needed after HTO surgery.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.6
• /
• pp.592-597
• /
• 2005

The push pull forward converter is suitable in a low output voltage, a high output current applications with wide input voltage ranges. All magnetic components including output inductor, transformer and input filter can be integrated into single EI/EE core. The integrated push pull forward converter is considered through the comparison of efficiency according to the circuit parameters. The Nicera company's 5M FEE18/8/10C and NC-2H FEI32/8/20 cores are used for the transformer. The integrated push pull forward converter ratings are of $36\~72V$ input and 3.3V/30A output. In case that NC-2H FEI32/8/20 core used in the converter, the efficiency is measured up to $83.5\%$ at the switching frequency 200 kHz and the 11A load. The efficiencies of $76.4\%$ at a full load and $82.95\%$ at a half load are measured.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.191-198
• /
• 2005

Menu is the most common interaction tool to select and execute a specific menu item from multiple menu options. With the very rapid increasing amount of information, various new menu designs have been developed. In this research, the pull-down menu, fisheye menu and grid menu were tested to compare the performance time, error rate, simplicity, usefulness, user friendliness, and overall user preference of each menu type. The grid menu was more efficient in selection speed than the pull-down and fisheye menus when the number of menu-items was 50 and 100. The time needed to choose a menu-item with a grid menu was less affected by the size of menu. The pull-down and the grid menus were considered to be more satisfactory, simple, user friendly, and useful than the fisheye menu. 42.3 percent of subjects indicated that the grid menu was their preferred selection tool among the menus. The grid menu is an efficient and robust alternative menu choice for small and middle size menu list. Further study is required to examine the possibility of grid menu on mobile devices.

• Journal of Biosystems Engineering
• /
• v.34 no.2
• /
• pp.71-76
• /
• 2009

This study was conducted to investigate the load acting on a tractor engine when it delivers the maximum power at drawbar. The results of the drawbar tests on the 5 locally-made and 14 imported tractors conducted at NIAE in 2004, and the 15 tractors tested at OECD test stations in foreign countries were analyzed and presented by the torque load ratio, defined as a ratio of the engine torque load caused by drawbar pull to its full-load capacity, as a function of pull speed. The NIAE test results showed that the torque load ratio increased from 20 to 80% with pull speed less than 5 km/h. At speeds faster than 5 km/h, it was 80${\sim}$110% regardless of the pull speed. However, the OECD test results showed that the torque load ratio was evaluated mostly to be 70${\sim}$90% in the entire pull speed range. The same trend was also shown for the maximum drawbar load. The difference in the torque load ratio may be attributable to bias-ply tires for locally-made and some imported tractors. It is also suggested that the input torque load may be increased safely up to 120% of the full load capacity of the tractor engine for an accelerated life test of tractor transmissions.