• The Research Journal of the Costume Culture
• /
• v.12 no.3
• /
• pp.415-428
• /
• 2004

The purpose of this thesis was to develop torso patterns according to the physical types of men in 20s. The procedure and results are as follows; 1. Of the men in 20s meeting the national average of physique, 4 men were selected and classified into 2 physical types according to their chest and waist circumference drops. One group had 20㎝ drop (Y type) while the other had 16㎝ drop (N type). Through evaluation performed by clothing construction professionals on the 4 upper bodice blocks drafted according to the existent drafting method and dressed on the 4 men, several problems have been found. These problems were adjusted and supplemented to make two new blocks. The fit of the new blocks were evaluated and proved to be satisfactory. 2. The following is the adjustments made to the existent men's torso patterns which had been utilized as the objects the first evaluation experiment. ① Though the back waist length of the pattern from the existent drafting method covered the center back length of the body in both Y type and N type, the front length did not causing it to stand away from the body. To adjust this, 2.0㎝ has been added to the center front length of each pattern so that the waist line could make a bar level to the ground. ② The shoulder line of the pattern from the existent drafting method had the tendency to fall backward. To make the shoulder line to fall in place, it has been moved 1.0㎝ to the front. 0.5㎝ has been added to the should length. ③ The neckline had a tendency to climb up. It has been lowered by 0.5㎝ until the line touched the center front neck point. ④ Though different in degree, the neck circumference did not allow enough width for both physique type causing the neckline to pull at side neck point with diagonal crease. To adjust this, 0.3㎝ and 0.6㎝ has been added to the Y type and N type respectively so that the neckline would touch the side neck point and the neckline could naturally fall into its original position. ⑤ Though different in degree, there was not enough space at the armhole causing wrinkles around this area. Therefore, 0.25㎝ and 0.5㎝ has been added to the front and back of the armholes of the Y and N types respectively. The armhole was made 1.0㎝ deeper only for the N type. ⑥ 1.0㎝ in the front and 0.5㎝ in the back were added to the side scam for the Y type while 0.5㎝ in the front and 0.25㎝ in the back were added for N type. This eliminated the unwanted wrinkles to give the silhouette a smooth look.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.1
• /
• pp.69-74
• /
• 2015

With difficulties during the cleaning of reflow flux residues due to the decrease of the part size and interconnection pitch in the advanced electronic devices, the need for the no-clean solder paste is increasing. In this study, an epoxy curable solder paste was made with SAC305 solder powder and the curable flux of which the main ingredient is epoxy resin and its reflow solderability, flux residue corrosivity and solder joint mechanical properties was investigated with comparison to the commercial rosin type solder paste. The fillet shape of the cured product around the reflowed solder joint revealed that the curing reaction occurred following the fluxing reaction and solder joint formation. The copper plate solderability test result also revealed that the wettability of the epoxy curable solder paste was comparable to those of the commercial rosin type solder pastes. In the highly accelerated temperature and humidity test, the cured product residue of the curable solder paste showed no corrosion of copper plate. From FT-IR analysis, it was considered to be resulted from the formation of tight bond through epoxy curing reaction. Ball shear, ball pull and die shear tests revealed that the adhesive bonding was formed with the solder surface and the increase of die shear strength of about 15~40% was achieved. It was considered that the epoxy curable solder paste could contribute to the improvement of the package reliability as well as the removal of the flux residue cleaning process.

• Steel and Composite Structures
• /
• v.6 no.6
• /
• pp.459-477
• /
• 2006

A theoretical research project is undertaken to develop integrated analysis and design tools for long span composite beams in modern high-rise buildings, and it aims to develop non-linear finite element models for practical design of composite beams. As the first paper in the series, this paper presents the development study as well as the calibration exercise of the proposed finite element models for simply supported composite beams. Other practical issues such as continuous composite beams, the provision of web openings for passage of building services, the partial continuity offered by the connections to columns as well as the behaviour of both unprotected and protected composite beams under fires will be reported separately. In this paper, details of the finite elements and the material models for both steel and reinforced concrete are first described, and finite element studies of composite beams with full details of test data are then presented. It should be noted that in the proposed finite element models, both steel beams and concrete slabs are modelled with two dimensional plane stress elements whose widths are assigned to be equal to the widths of concrete flanges, and the flange widths and the web thicknesses of steel beams as appropriate. Moreover, each shear connector is modelled with one horizontal spring and one vertical spring to simulate its longitudinal shear and pull-out actions based on measured load-slippage curves of push-out tests of shear connectors. The numerical results are then carefully analyzed and compared with the corresponding test results in terms of load mid-span deflection curves as well as load end-slippage curves. Other deformation characteristics of the composite beams such as stress and strain distributions across the composite cross-sections as well as distributions of shear forces and slippages in shear connectors along the beam spans are also examined in details. It is shown that the numerical results of the composite beams compare well with the test data in terms of various load-deformation characteristics along the entire deformation ranges. Hence, the proposed analysis and design tools are considered to be simple and yet effective for composite beams with practical geometrical dimensions and arrangements. Structural engineers are strongly encouraged to employ the models in their practical work to exploit the full advantages offered by composite construction.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.1
• /
• pp.34-40
• /
• 2004

Unerupted maxillary anterior teeth is not a common case, However it may present practitioners with management problem. The cause of impaction is considered to be multifactorial, and local cause is the most common. These impacted teeth require surgical intervention, removal, transplantation, or surgical exposure, with or without orthodontic traction to align the malpositioned tooth. The preferred option is surgical exposure and orthodontic correction. Surgical intervention and orthodontic correction should not be delayed to avoid unnecessary difficulties in aligning the tooth in the arch. Surgical exposure should be performed with the intent of providing sufficient attached gingiva rather than simply uncovering the crown, which results in only alveolar mucosal attachment. Attached gingiva is essential to secure the gingival tissues to the adjacent teeth at the dentogingival junction. Thus preventing loss of periodontal tissues as a result of the pull of the surrounding soft tissues and facial muscles. Labially impacted maxillary anterior teeth uncovered with an apically positioned flap technique have more un- esthetic sequelae than those uncovered with a closed-eruption technique. In the case of severly displaced impacted teeth, autotransplantation ensures preservation of the alveolar bone and will facilitate future placement of an osseointegrated implant once growth has ceased or if ankylosis/resorption of the transplant occurs.

• Korean Journal of Social Welfare
• /
• v.67 no.2
• /
• pp.33-60
• /
• 2015

The purpose of this study was to analyze the life experiences of fifteen marriage immigrant Asian women who went through running away from their home countries, marrying with Korean men, divorcing from their husbands, and coping with many difficulties after their divorce in Korean society. In order to conduct this study grounded theory methods have been employed. The central phenomenon digged out from this study was 'resistance to baffled reality' (i. e. dislocation). The causal conditions which brought about the central phenomenon were 'escaping for survival' and 'experiencing the gap between reality and expectation. 'The intervening conditions included 'getting to know the reality of their husbands,' 'losing hope,' and 'not being able to pull themselves together.' The contextual conditions consisted of 'being treated as maids,' 'becoming victims of family violence,' 'making up their minds to survive,' 'securing future life,' 'being marginalized,' and 'being aware of themselves as strangers.' The action/interaction strategies on the central phenomenon were 'building support systems,' 'building up will for new life,' and 'reconstructing social identity.'The final outcome was 'arranging places of new settlement.' The divorce was classified as four types: 'coping and growth,' 'emancipation and settling down,' 'being overwhelmed by livelihood,' and 'continuous wandering.' Based on these results, this study provided a few political and practice suggestions to prevent family violence and divorces among multi-cultural families, and also to bumper the impacts of divorce.

• Physical Therapy Korea
• /
• v.5 no.2
• /
• pp.65-80
• /
• 1998

Parents of handicapped children are experiencing difficulties in their children's care, social isolation, change of life style and lirnited leisure time. Because the parents should take care of the children's daily life, they have lots of psychological and physical stress. Chronic stress of parents puts stress to the other family members and affects the development of children with handicap. The purpose of this study were to identify the level of stress in each of parents of children with motor problem, the characteristics of the children and general information related with the children, and to analyse the stress by reasons. Specially organized questionnaire were used for an investigation method. "Test of stress in mother who has children with chronic illness" by Kim Hee-soon were modified and used. The questionnaire answered by 43 mothers and 35 fathers were analyzed. Data analysis includes frequency analysis, Pearson correlation coefficients, paired-samples t-test and MANOV A by SPSSWIN. The results were as follows: 1) Degree of handicap was most moderate (46.5%), level of motor development was most pull to walk (34.9%), and combined handicap was 69.8%. 2) Sexual distribution represented that 51.2% male and 48.8% female. The cost of physical therapy was 69.8% in no more than 100,000 won. 3) The mean of age, for the mother was 32.8 years and 35.3 years. Level of motor development that mother and father expect was 88.4%, 83% walk alone. 4) Both mother and father experienced stress in other of Part II (changes in father was the illness status of the child and difficulty in taking care of child), Part III (prognosis of the child's condition), Part I (social-personal relationships and the responsibility of the care givers). In the total score of stress, mother's stress is indicated higher level than father's stress. 5) There was no correlationship between characteristics and stress of mother and father. 6) There was no statistically significant difference between characteristics and related general information of children with handicap and stress of mother and father. As a results, the mother of children with handicap are experiencing more stress than the father. Both of parents have the most difficulties in the changes in the illness status of the child and difficulty in taking care of child. This study can be used as resources of education, therapy and counselling for children with handicap and their parents. This study, also, can be used to encourage the quality of Iife for the children with handicapped and their family.

• Journal of the Economic Geographical Society of Korea
• /
• v.7 no.2
• /
• pp.203-225
• /
• 2004

The purpose of this paper analyzes the characteristics of economic space in Gyeonggi border regions. Especially, this study focuses on understanding the environment enveloped the enterprises because today, largely influenced factor for regional economic development is enterprises. Since 1990's the change of the spacial organization in Korean Capital region has been inducing the functional transformation in Gyeonggi border regions so that new function -beyond military functions- is developed in these regions. By the disindustrialization in core region contributed to the industrialization in periphery, border regions are developed as a concentrated space of traditional industries and small size manufactural firms. The most important pull factor is facility for obtain a factory site and favorable condition of land price. Globally, the reasons to locate enterprise in these regions are found not in positive and progressive strategies but in passive and defensive strategies. Therefore few enterprise carried about influences of economic cooperation between North and South Korea at the moment of decision of their site. The survey reveal that enterprises didn't highly estimate the environment in border regions as their business activities. The first dissatisfied condition is insufficiency of labour and difficulty of access for administrative and high level services, due to geographical separation. Considering the recent tendency of spacial reorganization in Capital region is not always good for border regions, border regions have to employ a policy with the object of ameliorating regional business environments and growing up a potentiality of endogenous development.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.1
• /
• pp.164-175
• /
• 2000

Three compounds of Cu(II)-loaded N,N,N'-trimethylethylenediaminated Merrifield-type polymers were synthesized with yields higher than 80%, and the hydrolysis reaction rates of O-isopropylmethyl-phosphonofluoridate(GB) and O-pinacolylmethylphosphonofluoridate (GD) catalyzed by them have been surveyed. GB and GD hydrolysis by Cu(II)-loaded polymers occurs via intermediate complex mechanism where rapid equilibrium to form intermediate complex between substrate and Cu(II)-loaded polymers($K_f$) is followed by rate determining hydrolysis step($k_1$). The measured activation parameters for $k_1$ are ${\Delta}H^{\ddag}$ : $17.75{\pm}0.98kJ/mol$ ${\Delta}S^{\ddag}$ / : $-218.42{\pm}3.35J/mol$ K, $E^{\circ}_a$ : $20.22{\pm}0.98kJ/mo1$ for GB and ${\Delta}H^{\ddag}$ / : $11.16{\pm}1.15kJ/mol,$${\Delta}S^{\ddag}$ /: $-258.57{\pm}3.93J/mol$ K, $E^{\circ}_a$ : $13.64{\pm}1.15 kJ/mol$ for GD. Standard enthalpy/entropy changes corresponding to the intermediate complex formation constant $K_f$ are ${\Delta}H^{\circ}$ : $37.05{\pm}2.19 kJ/mo1,$$ {\Delta}S^{\circ}$ : $163.12{\pm}7.49 J/mol$ K and ${\Delta}H^{\circ}$ : 418.59{\pm}2.04 kJ/mol,$ ${\Delta}S^{\circ}$ : 4111.92{\pm}6.98 J/mol$ K for GB and GD, respectively, The electron push-pull mechanism by Cu(II)-loaded polymers lowers the P-F bond breaking energy(~400 kJ/mol) to less than 1/20 compared to the case in which no Cu(II)-loaded resin presents. Analysis of $K_f$ and 4k_1$ over pH=6.5~8.0 range suggest that the GB and GD hydrolysis occurs intramolecularily with $pK_a$ =7.29 for ligated $H_2O$ and $t_{1/2}$=36.9 sec, $pK_a$ = 7.06 and $t_{1/2}$=177.7 sec for GB and GD, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.174-174
• /
• 2008

초음파를 이용하여 액체 연료를 분사하면 균일한 입경과 미립화가 우수하며 에너지 절약과 공해방지등을 할 수 있다. 또한 유속과 유량에 관계없이 이용할 수 있어 반도체 분야의 웨이퍼와 평판 표시기상에 사진 석판용 화학물질의 균일도포 컴퓨터 하드 디스크의 광택제 도포등에 사용할 수 있다. 이처럼 초저의 유출 용량을 요구하는 모든 공정 및 액체연료의 분사가 요구되는 모든 산업에 적용할 수 있는 장점을 가지고 있다. 하지만 현제까지 주로 사용되고 있는 초음파노즐의 액츄에이터는 단판액츄에이터형로 높은 교류전압을 인가해주어야 하는 단점을 가지고 있다. 이 단점을 해결하기 위해 적층액츄에이터형을 사용하여 초음파 노즐 구동하면 낮은 교류 입력전압에서도 단판액츄에이터형 초음파 노즐과 같은 특성을 가질 수 있다. 또한 초음파 노즐의 구동시 기계적인 진동을 이용하므로 많은 열을 발생시켜 노즐의 온도가 상승하여 세라믹 액츄에이터에도 그 영향을 미치게 되어 열적 열화 현상이 일어날 수 있기에 높은 큐리온도를 가지는 액츄에이터가 필요하다. 본 실험에서는 $Pb(Mn_{1/3}Nb_{2/3})_{0.02}(Ni_{1/3}Nb_{2/3})_{0.12}(Zr_{0.50}Ti_{0.50})_{0.86}O_3$ 조성을 사용하여 $900^{\circ}C$의 저온에서 액상 소결하여 적층혈액츄에이터를 제작하였으며 압전 및 유전 특성을 조사하였다. 제작된 초음파노즐을 구동하기 위해서는 약 36kHz의 30V이상의 교류입력전압 할 수 있는 구동회로가 필요로 한다. 압전액츄에이터의 구동을 위해서는 정확한 정현파 입력이 필요 없다. 압전액츄에이터의 특성상 유사 정현파 입력 만으로도 임피던스 매칭이 이루어지기 때문에 설계가 쉽고 간편한 Push-Pull 방식을 이용한 PWM인버터를 사용하였고 인버터의 출력 주파수를 34~38kHz까지 가변 할 수 있게 설계하였다. 제작된 적층액츄에이터형 초음파 노즐을 PWM인버터로 실제 액체 연료인 경유를 분사하였을 때의 액츄에이터의 온도 변화에 따른 공진주파수와 온도 의존성, 전기적 특성을 조사하고 미립화 분사되는 경유의 미립자 크기 및 최대 분사량을 조사 하였다.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.769-777
• /
• 2003

The strengthening of concrete structures in situ with externally bonded carbon fiber is increasingly being used for repair and rehabilitation of existing structures. Because carbon fiber is attractive for this application due to its good tensile strength, resistances to corrosion, and low weight. Generally bond strength and behavior between concrete and carbon fiber mesh(CFM) is very important, because of enhancing bond of CFM. Therefore if bond strength is sufficient, it will be expect to enhance reinforcement effect. Unless sufficient, expect not to enhance reinforcement effect, because of occuring bond failure between concrete and CFM. In this study, the bond strength and load-displacement response of CFM to the concrete by the direct pull-out test(the tensile-shear test method) were investigated using the experiment and the finite element method analysis with ABAQUS. The key variables of the experiment are the location of clip, number of clips and thickness of cover mortar. The general results indicate that the clip anchorage technique for increasing bond strength with CFM appear to be effective to maintain the good post-failure behavior.