• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.545-552
• /
• 2008

To insure the quality and safety of ground anchors, pull-out test of anchor has to be done. In the individually controlled pull-out test system, pull-out device is used to introduce the same pull-out force to individual tendon that has a different length and a deflection. That is, that device has a separate pull-out oil jack to each tendon, thus the pull-out length of each jack is not the same, but that device introduces each tendon to the same pull-out force. In this study, the in-situ pull-out tests for the compression anchors were performed and its test results were analysed and compared to the results of center hole pull-out tests. In the case of pulling out each tendon using the individually controlled pull-out test device, the pull-out forces were distributed to a individual tendon. That device is excellent one that can solve the cause of unequal pull-out forces of each tendon appearing in the manufacture process and construction of anchors, and unequal pull-out forces due to the deferent length.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.5
• /
• pp.13-18
• /
• 1978

A delay switching PLL (DSPLL) is proposed for improvement of the frequency acquisition Performance (pull-in range) while keeping a narrow bandwidth LPF. It has, between the phase detector and the LPF, just a simple RC delay circuit, a switch and another phase detector controlling the switching time. For the common second order PLL, the pull-in capability of the DSPLL is analyzed approximately, without considering additive white noise effect, and verified experimentally. It is shown that the delay switching extends the pull-in range significantly, as much as a half of lock-range. At the phase tracking mode, the delay switching does not function, to make the DSPLL be a normal PLL.

• The korean journal of orthodontics
• /
• v.16 no.1
• /
• pp.71-84
• /
• 1986

The purpose of this study was to analyze the effect of orthopedic forces on the craniofacial complex utilizing the three kinds of the head gear. (high pull head gear, straight pull head gear, cervical pull head gear) For this study, the teeth and alveolar bone and palate were reproduced from birefringent materials and other parts of craniofacial complex were coated with birefringent material on the model. The effect of orthopedic forces on the craniofacial complex was analyzed by photoelastic method using transmission polariscope and reflection polariscope. The results were as follows. 1. The cervical pull head gear had the greatest tipping effect on the maxillary molars and high pull head gear had the least tipping effect. 2. In areas stressed, the cervical pull head gear stressed the greatest degree. 3. Only cervical pull head gear produced stress at the zygomaticofrontal suture and the posterior region of palate. 4. The straight pull head gear and high pull head gear produced stress at just inferior to the anterior nasal spine. 5. The cervical pull head gear and straight pull head gear produced tensile stress at the fronto-maxillary suture. 6. The pterygoid plates of the sphenoid bone, the zygomatic arches, the junction of the maxilla with the lacrimal and ethmoid bone, and the maxillary molars were affected by three types of head gear.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1289-1295
• /
• 2008

Recently, it is progressing a study for supporting various application services using OpenAPI(Application Program Interface). But it is not enough a study related OpenAPI(Open Application Interface) to access many collected context data of sensor networks for ubiquitous application services. Therefor, this paper presents Pull/Push service model based on sensor networks, and implements OpenAPI fer Pull/push application services. And, we design and implement OpenAPI using web service for Pull application services. This Pull OpenAPI supports users the context data of temperature and humidity using the remote service based on .Net framework in sensor networks. And, we design and implement OpenAPI using TCP/IP socket interface for Push application services in sensor network. This Push OpenAPI provides users a state of temperature, humidity collecting in sensor networks. Consequently, user can develop easily various application services as supporting OpenAPI instead of closed application interface of sensor networks based on existed specific database.

• The Journal of the Korea Contents Association
• /
• v.21 no.2
• /
• pp.462-473
• /
• 2021

With the development of society, changes in the family structure of China's residents and the increase in family income, parent-child travel has gradually become a new hotspot for tourism consumption. It is important for tourism marketers to understand the needs and motivations of parent-child travelers. This study explored the push and pull motivations of parent-child travelers by conducting a questionnaire survey of 290 travelers to parent-child farms and validated the path relationships between push and pull motivations, experiences and behavioral intentions. The result indicated that: 3 push factors were derived from the factor analysis of 13 push items and were named as 'For children & Family', 'Escape & Relax', and 'Socialization'; 3 pull factors were derived from the factor analysis of 11 pull items and were labeled: 'Facilities & Safety', 'Theme activities', and 'Environment'. Through sub hypotheses testing, the results show that push-pull motivation of parent-child travelers has a positive effect on their experience(4Es) for attending. 'Esthetics Experience' has the highest effect on the parent-child travelers' behavioral intentions, followed by 'Education Experience' and 'Entertainment Experience'.

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.121-129
• /
• 2004

The purpose of this study was to photoelastically visualize 4he distribution of fortes transmitted to the alveolus and surrounding structures using three different types of headgear for the distal movement of the upper molars. A photoelastic maxillary model was made and three different directional forces applied, which were high-pull, straight-pull, and cervical-pull. Stress distribution was recorded through circular polariscope, and two-dimensional photoelastic stress analysis was performed according to isochromatic fringe characteristics. The results were as follows: 1. In the case of high-pull headgear bodily movement occurred in the medium- length outer bow, stress distribution in the apical region was 1st molar, 2nd premolar, lst premolar in sequence and there was no apparent difference. 2. In the case of straight-pull headgear, bodily movement occurred in the long outer bow and stress distribution in the apical region was heavy in the 1st molar, 2nd premolar, 1st premolar in sequence. But. there were no apparent differences according to the length of the outer bow. 3. In the case of cervical- pull headgear, bodily movement also occulted in 4he long outer bow, and apical stress of the premolar region was heaviest among other cases and apical stress of the 2nd premolar was heaviest in the short outer bow. In clinical situations, to achieve bodily movement of the upper 1st molars without modifying outer bow height, applying an outer bow length as long as the inner bow length in high-pull headgear and applying an outer bow length longer than the inner bow length in straight-pull, cervical-pull headgear are recommended.

• Journal of Korean Physical Therapy Science
• /
• v.25 no.2
• /
• pp.47-54
• /
• 2018

Purpose: The purpose of this study was to investigate the most effective exercise position of Latissimus dorsi's activities during Pull up, Push up and Lat pull down among few positions of hand grips(pronation, Supination and neutral grip) and grip widths(30cm, 60cm) based on EMG activities. Method: 10 healthy adults were participated in this study and the surface EMG activities of the Latissimus dorsi were measured during Pull up, Push up and Lat pull down exercise according to specific hand grip and grip width positions. The maximum and mean value of Latissimus dorsi's EMG activities at all positions were recorded and analysed by ONE-WAY REAPTED ANOVA. Results: The showed that the most Latissimus dorsi's activities is during Pull up exercise. Main results are as follows 1)maximum value: For Pull up, among all studied positions, Rt Latissumus dorsi, position of Supinated grip and 60cm grip width showed strongest muscle activation based on maximum EMG value. Statistical significance was assumed at p<.05. 2)mean value: For Pull up, among all studied positions, Both Latissimus dorsi, position of pronated grip and 60cm grip width showed strongest muscle activation based on mean EMG value. Statistical significance was assumed at p<.05. Conclusion: Therefore, taking the results of this study, Pull up exercise would be the best exercise of Latissimus dorsi's activation. It is recommended to do in pronated grip position and 60cm grip width during Pull up to make body fit.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.04a
• /
• pp.36-39
• /
• 2000

멀티미디어 통신 시스템은 멀티미디어의 특성상 대용량 데이터를 처리하기 위한 버퍼 관리기법이 요구된다. 버퍼에 있는 데이터를 전달하는 방식에는 데이터를 제공하는 서버가 데이터 흐름을 제어하는 Push 방식과 데이터를 제공받는 클라이언트가 데이터 흐름을 제어하는 Pull 방식이 있다. 그러나 RTP를 사용하는 기존의 멀티미디어 통신 시스템의 경우 서버와 클라이언트 사이에 Push 방식과 Pull 방식 중의 하나만을 제공하기 때문에 다양한 미디어의 재생을 지원하기에는 한계가 있고, 인터렉티브한 통신이 불가능하다. 더욱이, Push/Pull 두 가지 방식을 모두 지원한다하더라도 단일화된 버퍼 구조를 제공하지 않아 메모리 사용의 낭비가 있다는 단점이 있다. 이를 해결하기 위하여 , 본 논문에서는 RTP를 사용하는 멀티미디어 통신환경에서 각각 단일화된 버퍼구조 구조를 가지고 있는 서버와 클라이언트 사이에 Push 방식과 Pull 방식의 전송방식을 모두를 지원할 수 있는 통합된 Push/Pull 전송 모델을 제안한다. 이 기법은 서버와 클라이언트 사이에서 Peer-to-Peer 개념으로 인터랙티브한 Push/Pull 전송을 지원할 뿐만 아니라 일관된 인터페이스를 지원하는 단일 버퍼 구조를가짐으로써 시스템의 메모리 효율을 향상시킬 수 있다.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.478-480
• /
• 2008

On this paper, digitally controlled push-pull dc-dc converter and dc-ac inverter for induction motor control are presented, which is used one DSP(digital signal processor). This system has 12V battery input for the push-pull converter, and the push-pull converter generates 300V output for induction motor inverter input. In order to compensate the push-pull converter, the transfer function of push-pull converter is derived and digital PI compensator is adapted. Through bode diagram, stability of digital controlled push-pull converter is analyzed. To verify the proposed system, digital simulation of the induction motor drive using digital push-pull converter are performed.

• Geotechnical Engineering
• /
• v.12 no.4
• /
• pp.87-100
• /
• 1996

The pull -out test has been used to investigate the friction properties between soil and grid type geosynthetics which is useful to measure the passive bearing resistance as well as the skin friction. In this paper, the friction properties between geogrid and a weathered granite soil are investigated by performing various pull-out tests. From the test results, a rational pull out test equipment and test method is suggested by evaluating the effects of major factors (such as geogrid width, location of soil box facing, vertical loads and pulll -out displacement rate, etc.) on pull -out test results.