• Journal of Cadastre & Land InformatiX
• /
• v.44 no.1
• /
• pp.179-194
• /
• 2014

In this study, it aims to research for unified system of "the surveying and geospatial information management" and new National geoSpatial Information Infrastructure(NSDI) as new paradigm against the strategy of "global geospatial information management". The country's existing NGIS projects and the policies of spatial information were examined in this paper, then it was defined newly by modification of NSDI's data coverage with bottom-up method. The new NSDI strategy is based on large scale digital map which was influenced by the local and global trend such as open data, e-Government, Earth observation, etc. (refer to Fig. 1). It was also suggested with new concept of NSDI model that the public-private sharing data can be added to digital map on equal term with spatial core data. (refer to Fig. 2) It is proposed the institutional model of MOLIT(Ministry of Land, Infrastructure and Transport) as new concept of NSDI which was applied(refer to Fig. 4). The new model is improving localization and reinforcing cooperation system with not only the other departments within the MOLIT but also the other ministries(forestry, environment, agriculture, heritage, etc.) from independent operation system as a part informatization of land, infrastructure and transport. At the new SDI institutional model of the MOLIT, the spatial information is reorganized as common data infrastructure for all applications, Goverment 3.0 can be feasible according to common data related to government agencies and local government's data vertically or horizontally. And then, it can be practical strategy model to integrate and link all the map and the register which are managed by the laws and institutions if this unified system as a common data can include all spatial core data(digital map), such as base map data of NGA(national gespatial agency), land data and facility data of local government.

• The Journal of the Korea Contents Association
• /
• v.12 no.9
• /
• pp.500-511
• /
• 2012

Recently, use frequency for traffic information which provides shortest paths and traffic condition is increasing. Specially, in the survey, it is shown that users prefer internet portal sites which can be used the most easily among traffic information media. But, there are not many verification systems for traffic information contents of internet portal sites which collect and provide information than traffic information contents which are provided by public service. The purpose of this study is to investigate real accuracy and accuracy felt by users about information provided by portal sites. Therefore, in this research we verified accuracy of information by portal site with real field data and investigate real usage about contents and experienced accuracy by users through survey. Also, users' expectation and satisfaction were surveyed and the contents to be improved were selected by using IPA technique. By the result of accuracy verification by field data using portable DSRC(Dedicated Short Range Communication) devices, it is shown that average error was 14~32% and sometimes very high rate. Also, it is shown that 28.3 % of total respondents prefers the information by portal sites and 50 % of total respondents felt that contents of traffic information by portal sites are not accurate. Real-time traffic condition was selected as the most inaccurate one among all contents of traffic information and it was analyzed that intensive efforts for improving information about real-time traffic condition are needed.

• Journal of the Korean association of regional geographers
• /
• v.4 no.1
• /
• pp.135-155
• /
• 1998

The purpose of this study is to evaluate the environmental sustainability of new town development in metropolitan area, Korea and derive some policy implications for sustainable urban development. The case study area selected for empirical research is Jisan Bummul new town in Taegu. In the part of theoretical review, it is considered that the urban form suitable to sustainable development of a metropolis is the type of decentralized concentration. For the decentralized concentration form, we suggest developing suburban centers with self-sufficiency within a metropolis. This strategy is to develop a few suburban centers on the outskirts of a metropolis to decentralize urban activities of the central city, and to conserve the remaining. The empirical study evaluating the environmental sustainability of new town development shows that Jisan Bummul new town generally have low environmental sustain ability, because of the policy of mass housing provisions without consideration on overall natural conditions and environmental capacity of the area. To develop a new town. we must first select the locational site with minimum possibility of the destruction of natural environment, and then it is necessary to develop new towns into compact form to minimize the destruction of the natural environment. Second, a new town should be developed into a large scale to obtain urban self-sufficiency. Third plans must be established for decentralising both industrial and residential functions of a metropolis simultaneously. As more detailed policy implications, it is suggested that the policies are needed to improve the quality of educational conditions and enhance the level of services of public transport facilities. It is also necessary to establish the comprehensive development plan that takes the adjacent developmental area into consideration, and to prepare various action plans to bring up the facilities of self-sufficiency. In the selection of the location of a new town, the adaptability of public transportation planning must be emphasized. But, to take a program for short-term mass housing provisions must be restricted.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1997.11a
• /
• pp.3-31
• /
• 1997

Water has always played a significant role in the lives of people. In urbanised Rome, with its million people. sophisticated supply systems developed and then fled with the empire. only to be rediscovered later But it was the industrial Revolution commencing in the eighteenth century that ushered in major paradigm shifts In use and altitudes towards water. Rapid and concentrated urbanisation brought problems of expanded demands for drinking supplies, waste management and disease. The strategy of using water from local streams, springs and village wells collapsed under the onslaughts of rising urban demands and pollution due to poor waste disposal practices. Expanding travel (railways. and steamships) aided the spread of disease. In England. public health crises peaks, related to water-borne typhoid and the three major cholera outbreaks occurred in the late eighteenth and early nineteenth century respectively. Technological, engineering and institutional responses were successful in solving the public health problem. it is generally accepted that the putting of water into pipe networks both for a clean drinking supply, as well as using it as a transport medium for removal of human and other wastes, played a significant role in towering death rates due to waterborne diseases such as cholera and typhoid towards the end of the nineteenth century. Today, similar principles apply. A recent World Bank report Indicates that there can be upto 76％ reduction in illness when major water and sanitation improvements occur in developing countries. Water management, technology and thinking in Australia were relatively stable in the twentieth century up to the mid to late 1970s. Groundwater sources were investigated and developed for towns and agriculture. Dams were built, and pipe networks extended both for supply and waste water management. The management paradigms in Australia were essentially extensions of European strategies with the minor adaptions due to climate and hydrogeology. During the 1970s and 1980s in Australia, it was realised increasingly that a knowledge of groundwater and hydrogeological processes were critical to pollution prevention, the development of sound waste management and the problems of salinity. Many millions of dollars have been both saved and generated as a consequence. This is especially in relation to domestic waste management and the disposal of aluminium refinery waste in New South Wales. Major institutional changes in public sector water management are occurring in Australia. Upheveals and change have now reached ail states in Australia with various approaches being followed. Market thinking, corporatisation, privatisation, internationalisation, downsizing and environmental pressures are all playing their role in this paradigm shift. One casualty of this turmoil is the progressive erosion of the public sector skillbase and this may become a serious issue should a public health crisis occur such as a water borne disease. Such crises have arisen over recent times. A complete rethink of the urban water cycle is going on right now in Australia both at the State and Federal level. We are on the threshold of significant change in how we use and manage water, both as a supply and a waste transporter in Urban environments especially. Substantial replacement of the pipe system will be needed in 25 to 30 years time and this will cost billions of dollars. The competition for water between imgation needs and environmental requirements in Australia and overseas will continue to be an issue in rural areas. This will be especially heightened by the rising demand for irrigation produced food as the world's population grows. Rapid urbanisation and industrialisation in the emerging S.E Asian countries are currently producing considerable demands for water management skills and Infrastructure development. This trend e expected to grow. There are also severe water shortages in the Middle East to such an extent that wars may be fought over water issues. Environmental public health crises and shortages will help drive the trends.

• Journal of Distribution Science
• /
• v.14 no.5
• /
• pp.51-57
• /
• 2016

Purpose - In the year of 2015 and 2016, one of the items that got attention in CES was a drone. It has been 100 years since a drone emerged, but most were used for military purposes. As its use became diverse as of 2010, it got attention of the general public. In Korea, it was in 2011 that a drone was known to the public through an aerial video shooting for television program. This study tried to come up with suggestions by comparing domestic with overseas cases, and tried to consider the related technologies and systems with applying the role of drones in logistics service. Research design, data, and methodology - The overseas cases were regarded as drone's logistical purpose. The Prime Air service by US Amazon is still not commercialized and under pre-testing due to Federal Aviation Regulations, although it started in 2013. In Germany, DHL succeeded in delivering service testing which is called Parcelcopter, but it is not commercialized yet. Other than these, there are more attempts to prepare logistics service in China with Taobao, in France with Geopost's test, and in Africa. In Korea, CJ Korea Express tested delivery with a self-developed drone Results - In order to study for utilizing drones for logistics as the prerequisites, some overseas and domestic cases, which are currently considered, were reviewed. Also, the technologies and institutional requirements to commercialize drones for logistical purpose were reviewed. The reasons for using drones in logistics is to ensure the price competitiveness by reducing cost. The empirical test also will be needed because drone pilot areas are designated by ministry of land, infrastructure and transport. Conclusions - In order to utilize drones in logistics and foster the industry, this study would like to suggest the followings. First of all, size of drones for logistics needs to be fixed and their operating system should be standardized. Centralized investment resources are needed through standardization to ensure the market occupancy. Secondly, it is necessary to get the converged businesses that do research, develop and commercialize drones with the investment of private sector. Example can be found in Korea aerospace Industries. We can respond to the rapid growth of the market with intensive investing by integrating the private sector investment. Thirdly, institutional arrangements are needed to be established quickly. In the case of high-technologies like drones, institutional support often does not follow the rapid development of the technology. The problems can be found in securing drones-only airspace, creating drone-specialized pilot's license, matters related to remote controller and complementary regulations for drones in Aviation Act. If these regulations are not prepared or complemented at the right timing, technologies cannot be commercialized even though the development is completed. Fourthly, there is a need to secure the transparency regarding possible privacy and personal information protection problem while operating drones. Finally, in order to foster this new industry, government should focus on supporting R&D more in the long term than short term outcomes.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.3
• /
• pp.101-109
• /
• 2016

This research is to explore food waste management across local governments. In particular, pubic administration on food waste, food waste management (from generation to disposal) and civil complaints in jurisdiction are examined. In doing so, a self-administered questionnaire survey was conducted among civil officers in charge of food waste management, and all the collected responses were statistically analyzed. The main results were as follows: public spending on food waste management was a little larger in metropolises than in provincial cities, and the largest food waste source was identified as households (in housing). While regular collection of food waste by trucks was the most common transport method adopted by local governments, resource recovery for compost/fertilizer production was widely used. Also, most of the respondents agreed that the current approach to food waste handling practices are necessarily replaced with more advanced technology converting waste into energy or fuel. Further, it's found that the civil complaints on food waste management were largely categorized into 3 groups - food waste handling, civil service and food waste retrieval. Therefore, the findings indicate that the development and application of no-food waste or waste-to-resource systems are effective in housing estates where large amount of food waste is generated and eliminated.

• Journal of Intelligence and Information Systems
• /
• v.26 no.2
• /
• pp.131-145
• /
• 2020

In line with the trend of industrial innovation, IoT technology utilized in a variety of fields is emerging as a key element in creation of new business models and the provision of user-friendly services through the combination of big data. The accumulated data from devices with the Internet-of-Things (IoT) is being used in many ways to build a convenience-based smart system as it can provide customized intelligent systems through user environment and pattern analysis. Recently, it has been applied to innovation in the public domain and has been using it for smart city and smart transportation, such as solving traffic and crime problems using CCTV. In particular, it is necessary to comprehensively consider the easiness of securing real-time service data and the stability of security when planning underground services or establishing movement amount control information system to enhance citizens' or commuters' convenience in circumstances with the congestion of public transportation such as subways, urban railways, etc. However, previous studies that utilize image data have limitations in reducing the performance of object detection under private issue and abnormal conditions. The IoT device-based sensor data used in this study is free from private issue because it does not require identification for individuals, and can be effectively utilized to build intelligent public services for unspecified people. Especially, sensor data stored by the IoT device need not be identified to an individual, and can be effectively utilized for constructing intelligent public services for many and unspecified people as data free form private issue. We utilize the IoT-based infrared sensor devices for an intelligent pedestrian tracking system in metro service which many people use on a daily basis and temperature data measured by sensors are therein transmitted in real time. The experimental environment for collecting data detected in real time from sensors was established for the equally-spaced midpoints of 4×4 upper parts in the ceiling of subway entrances where the actual movement amount of passengers is high, and it measured the temperature change for objects entering and leaving the detection spots. The measured data have gone through a preprocessing in which the reference values for 16 different areas are set and the difference values between the temperatures in 16 distinct areas and their reference values per unit of time are calculated. This corresponds to the methodology that maximizes movement within the detection area. In addition, the size of the data was increased by 10 times in order to more sensitively reflect the difference in temperature by area. For example, if the temperature data collected from the sensor at a given time were 28.5℃, the data analysis was conducted by changing the value to 285. As above, the data collected from sensors have the characteristics of time series data and image data with 4×4 resolution. Reflecting the characteristics of the measured, preprocessed data, we finally propose a hybrid algorithm that combines CNN in superior performance for image classification and LSTM, especially suitable for analyzing time series data, as referred to CNN-LSTM (Convolutional Neural Network-Long Short Term Memory). In the study, the CNN-LSTM algorithm is used to predict the number of passing persons in one of 4×4 detection areas. We verified the validation of the proposed model by taking performance comparison with other artificial intelligence algorithms such as Multi-Layer Perceptron (MLP), Long Short Term Memory (LSTM) and RNN-LSTM (Recurrent Neural Network-Long Short Term Memory). As a result of the experiment, proposed CNN-LSTM hybrid model compared to MLP, LSTM and RNN-LSTM has the best predictive performance. By utilizing the proposed devices and models, it is expected various metro services will be provided with no illegal issue about the personal information such as real-time monitoring of public transport facilities and emergency situation response services on the basis of congestion. However, the data have been collected by selecting one side of the entrances as the subject of analysis, and the data collected for a short period of time have been applied to the prediction. There exists the limitation that the verification of application in other environments needs to be carried out. In the future, it is expected that more reliability will be provided for the proposed model if experimental data is sufficiently collected in various environments or if learning data is further configured by measuring data in other sensors.

• Smart Media Journal
• /
• v.7 no.1
• /
• pp.37-44
• /
• 2018

Utilizing sequence control and numerical computing, embedded devices are used in a variety of automated systems, including those at industrial sites, in accordance with their control program. Since embedded devices are used as a control system in corporate industrial complexes, nuclear power plants and public transport infrastructure nowadays, deliberate attacks on them can cause significant economic and social damages. Most attacks aimed at embedded devices are data-coded, code-modulated, and control-programmed. The control programs for industry-automated embedded devices are designed to represent circuit structures, unlike common programming languages, and most industrial automation control programs are designed with a graphical language, LAD, which is difficult to process static analysis. Because of these characteristics, the vulnerability analysis and security related studies for industry automation control programs have only progressed up to the formal verification, real-time monitoring levels. Furthermore, the static analysis of industrial automation control programs, which can detect vulnerabilities in advance and prepare for attacks, stays poorly researched. Therefore, this study suggests a method to present a discussion on an industry automation control program designed to represent the circuit structure to increase the efficiency of static analysis of embedded industrial automation programs. It also proposes a medium term translation technology exploiting LLVM IR to comprehensively analyze the industrial automation control programs of various manufacturers. By using LLVM IR, it is possible to perform integrated analysis on dynamic analysis. In this study, a prototype program that converts to a logical expression type of medium language was developed with regards to the S company's control program in order to verify our method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.52-63
• /
• 2009

Recently in Korea, in the case of metropolis, the urban signalized intersections are controlled by traffic information center or ITS center. Cheon-an City also established traffic information center through the 1st.-$\sim$3rd. ITS public construction and has managed this center that includes bus information service, traffic information collection and providing service, parking information service, and traffic responsive control system. In the Cheon-an metropolitan traffic signal operation, traffic signal controllers were grouped by the each main traffic flow axes and performed with coordinated signal timing for the signalized arterials, and also cycle and split changed by realtime traffic demands. Cheon-an urban traffic responsive control system was evaluated by intersection delay and speed, then it was verified that the delay decreased and vehicle speed improved. However, the rural signal control system to connect adjacency town was evaluated to have lower status than urban area due to the unimproved TOD (Time of day) plan. Therefore actuated signal control was examined for substitutive control system in isolated signal intersection. The aim of this article is to compare actuated signal control with TOD mode in the rural intersection of Cheon-an and to fine superiority of these two control mode, with evaluation of vehicle delay by using HCM(2000) method and by micro-simulation CORSlM. The result of field test show that actuated signal control gave better performance in delay comparison than the existing TOD signal control. And simulation outcome verified that non-optimized TOD has higher delay than optimized TOD mode, non-optimal actuated mode, and optimal actuated signal control mode. Particularly, these three modes delays had not different values according to the paired sample t-test. This is because small traffic demands were loaded in each links. This suggested actuated signal control is expected to be more effective than TOD mode in some rural isolated intersections which frequently need to survey for traffic volume.

• The Journal of Society for e-Business Studies
• /
• v.21 no.2
• /
• pp.47-59
• /
• 2016

Parcel service is to deliver goods from one place to the designated destination requested according to user request. Parcel operations such as sorting, distributing, etc. or the managed information are heterogeneous by the companies. Additionally, it is impossible to support interoperability between companies with unformatted data of manual processing. Most parcel package boxes attached to paper typed waybill is attached is delivered to consignee. So, security problems such as personal information leaking are occurred, or extra processing time and logistics costs are needed due to wrong or the damaged information. Business environment of parcel service is rapidly changed as introducing unmanned delivery or the advanced technology such as Internet of Things. User want to know the accurate status or steps from parcel service request to delivery. To provide these requirements, the unified and integrated waybill information for reliable transportation of parcel service is needed. This information will provide to pickup or delivery carrier, warehouse or terminal, and parcel service user per pickup, transport, and delivery stage of parcel delivery service. Therefore, this paper defines the simplified and unified information model for parcel service waybill by analyzing information systems used for logistics unit processes that is occurred to parcel service, and manual work processes, and developing the relevant information of work flows occurred between business processes or transactions with the collected or processed information by from parcel service's stages. It is possible to share these standard model between business entities, and replacing paper typed waybill will improve national life safety as preventing security threats by paper typed waybill. As a result, it will promote the public interest from the stakeholder's perspective.