• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1989년도 봄 학술발표회 논문집
• /
• pp.5-10
• /
• 1989

In this study, the basic concept of design response spectrum is briefly revi-ewed. To generate the artificial earthquake acceleration, the method of superpo-sition of cosine waves is used. Theoretical developments using F.F.T. and spect-ral density function are compared. The amplitude was derived by use of the peak factor and the phase angle is d-erived by use of Monte Carlo simulation. To smoothen the match, the calculated pseudo velocity respon-se spectrum is compared with input pseudo velocity response spectrum at a set of control frequencies. With the modified spectral density function, a new acceleration and pseudo velocity response spectrum are generat-ed.

• Structural Engineering and Mechanics
• /
• 제41권6호
• /
• pp.759-773
• /
• 2012

The objective of this paper is to present an energy-based method for calculating target displacement of RC structures. The method, which uses the Newmark-Hall pseudo-velocity spectrum, is called the "Pseudo-velocity Spectrum (PSVS) Method". The method is based on the energy balance concept that uses the equality of energy demand and energy capacity of the structure. First, nonlinear static analyses are performed for five, eight and ten-story RC frame structures and pushover curves are obtained. Then the pushover curves are converted to energy capacity diagrams. Seven strong ground motions that were recorded at different soil sites in Turkey are used to obtain the pseudo-acceleration and the pseudo-velocity response spectra. Later, the response spectra are idealised with the Newmark-Hall approximation. Afterwards, energy demands for the RC structures are calculated using the idealised pseudo-velocity spectrum. The displacements, obtained from the energy capacity diagrams that fit to the energy demand values of the RC structures, are accepted as the energy-based performance point of the structures. Consequently, the target displacement values determined from the PSVS Method are checked using the displacement-based successive approach in the Turkish Seismic Design Code. The results show that the target displacements of RC frame structures obtained from the PSVS Method are very close to the values calculated by the approach given in the Turkish Seismic Design Code.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.129-139
• /
• 2003

The response displacement method is the most frequently used method for seismic design of buried structures. This method is pseudo-static method, and the evaluations of velocity response spectrum of seismic base and response displacement of surrounding soil are the most important steps. In this study, the evaluation of velocity response spectrum of seismic base according to the Korean seismic design guide and the simple method of calculating the response displacement were studied. It was found that velocity response spectrum of seismic base can be estimated by direct integrating the ground-surface acceleration response spectrum of soil type $S_{A}$, and the evaluation of the response displacement using double cosine method assuming two layers of soil profile shows the advantages in the seismic design.n.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.211-221
• /
• 2003

지중구조물의 내진해석에 자주 이용되는 방법으로 응답변위법이 있다. 응답변위법은 정적인 해석방법으로, 이 방법의 핵심은 지진시 지중구조물 측벽에 작용하는 지반변위를 산정하는 것이다. 이때 해석대상부지의 고유주기에 해당하는 기반면의 속도 응답스펙트럼 값을 결정하는 일이 매우 중요하다. 본 연구에서는 국내 설계지반운동기준에 적합한 기반면의 속도 응답스펙트럼 산정과 지반응답해석 없이 응답변위를 신뢰성있게 산정하는 간편법에 대한 연구를 수행하였다. 해석결과 국내 내진설계 기준의 S$_A$ 지반의 지표면 가속도 응답스펙트럼을 적분하여 속도 응답스펙트럼으로 환산하는 방법과 지반을 두 개의 층으로 구분하여 지진시 지반의 응답변위를 산정하는 방법을 현업 설계에 적용할 경우 경제적으로 큰 잇점이 있을 것으로 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.60-65
• /
• 2003

In this study, for estimating responses of a controlled structure and determining the maximum control force of velocity-dependent damping devices, three estimation models such as Fourier envelope convex model, probability model, and Newmark design spectrum are used. For this purpose, a procedure proposed by Gupta (1990) for estimating spectral velocity using pseudo-spectral velocity which is given by the estimation models is used and modified to consider the effects of increased damping ratio by the damping device. Time history results indicate that Newmark design spectrum gives the best estimation of maximum control force for over all period structures.

• 한국소음진동공학회논문집
• /
• 제14권6호
• /
• pp.503-511
• /
• 2004

본 연구에서는 푸리에 모델, 확률 모델, 그리고 Newmark 설계 스펙트럼 방법과 같은 응답예측 모델을 사용하여 속도의존형 감쇠장치에 의해 제어되는 구조물의 응답과 제어기의 최대제어력을 예측하였다. 이를 위해, 유사 속도로부터 실제 속도를 예측하는 방법이 제안되었으며, 이 방법은 감쇠장치에 의해 증가되는 감쇠비의 실제속도에 대한 효과를 고려한다. 시간이력해석결과는 정확한 최대제어력을 예측하기 위해서는 실제속도가 사용되어야 하며, 제안된 방법에 의해 수정된 Newmark 설계 스펙트럼이 가장 전 주기구간에 걸쳐 정확한 예측 값을 산정함을 보여준다.

• Earthquakes and Structures
• /
• 제8권5호
• /
• pp.1241-1254
• /
• 2015

Spatially variable ground motions can be significant on the seismic response of a structure due to the incoherency of the incident wave. Incoherence of the incident wave is resulted from wave passage and wave scattering. In this study, wave passage effect on the response spectrum of a building structure built on a soft soil layer was investigated utilizing a finite element program of P3DASS (Pseudo 3-dimensional Dynamic Analysis of a Structure-soil System). P3DASS was developed for the axisymmetric problem in the cylindrical coordinate, but it is modified to apply anti-symmetric input earthquake motions. Study results were compared with the experimental results to verify the reliability of P3DASS program for the shear wave velocity of 250 m/s and the apparent shear wave velocities of 2000-3500 m/s. Studied transfer functions of input motions between surface mat foundation and free ground surface were well-agreed to the experimental ones with a small difference in all frequency ranges, showing some reductions of the transfer function in the high frequency range. Also wave passage effect on the elastic response spectrum reduced the elastic seismic response of a SDOF system somewhat in the short period range.

• Structural Engineering and Mechanics
• /
• 제64권4호
• /
• pp.473-485
• /
• 2017

An isolated building, composed of superstructure and isolation system which have very different damping properties, is typically non-classical damping system. This results in inapplicability of traditional response spectrum method for isolated buildings. A multidimensional response spectrum method based on complex mode superposition is herein introduced, which properly takes into account the non-classical damping feature in the structure and a new method is developed to estimate velocity spectra from the commonly used displacement or pseudo-acceleration spectra based on random vibration theory. The error of forced decoupling method, an approximated approach, is discussed in the viewpoint of energy transfer. From the base-isolated benchmark model, as a numerical example, application of the procedure is illustrated companying with comparison study of time-history method, forced decoupling method and the proposed method. The results show that the proposed method is valid, while forced decoupling approach can't reflect the characteristics of isolated buildings and may lead to insecurity of structures.

• Earthquakes and Structures
• /
• 제3권3_4호
• /
• pp.341-363
• /
• 2012

The spectral representation method is a quick and versatile tool for the generation of spatially variable, response-spectrum-compatible simulations to be used in the nonlinear seismic response evaluation of extended structures, such as bridges. However, just as recorded data, these simulated accelerations require processing, but, unlike recorded data, the reasons for their processing are purely numerical. Hence, the criteria for the processing of acceleration simulations need to be tied to the effect of processing on the structural response. This paper presents a framework for processing acceleration simulations that is based on seismological approaches for processing recorded data, but establishes the corner frequency of the high-pass filter by minimizing the effect of processing on the response of the structural system, for the response evaluation of which the ground motions were generated. The proposed two-step criterion selects the filter corner frequency by considering both the dynamic and the pseudo-static response of the systems. First, it ensures that the linear/nonlinear dynamic structural response induced by the processed simulations captures the characteristics of the system's dynamic response caused by the unprocessed simulations, the frequency content of which is fully compatible with the target response spectrum. Second, it examines the adequacy of the selected estimate for the filter corner frequency by evaluating the pseudo-static response of the system subjected to spatially variable excitations. It is noted that the first step of this two-fold criterion suffices for the establishment of the corner frequency for the processing of acceleration time series generated at a single ground-surface location to be used in the seismic response evaluation of, e.g. a building structure. Furthermore, the concept also applies for the processing of acceleration time series generated by means of any approach that does not provide physical considerations for the selection of the corner frequency of the high-pass filter.

• 한국지진공학회논문집
• /
• 제3권1호
• /
• pp.21-28
• /
• 1999

본 연구의 목적은 한반도 남부 지역에서의 지진동 감쇄식을 개발하는 것이다 활용가능한 계기 지진 자료로부터 지진원 및 지반 매질의 특성을 추정하고 그 값을 입력 요소로써 사용하였다 확률진동이론에 의하여 최대 지반가속도 및 의사 속도 응답스펙트럼을 모사하여 이로부터 최대지반 가속도 및 의사 속도 응답스펙트럼에 대한 감쇄식을 지역규모 및 진원거리의 함수로 개발하였다