• Journal of Korean Society of societal Security
• /
• v.1 no.3
• /
• pp.77-81
• /
• 2008

In this paper, we introduce a multi purpose environmental monitoring system developed as a commercially available standard using the technique of hetero-core spliced fiber optic sensor. The monitoring system has been tested and evaluated in a possible outdoor condition in view of the full scaled operation at actual sites to be monitored. Additionally, the developed system in this work conveniently provides us with various options of sensor modules intended for monitoring such physical quantities as displacement, distortion, pressure, binary states, and liquid adhesion. Two channels of optical fiber line were monitored, in each of which three displacement sensor modules were connected in series, in order to examine the performance to a pseudo-cracking experiment in the outdoor situation, and to clarify temperature influences to the system in terms of the coupling of optical connectors and the OTDR stability. The pseudo-cracking experiment successfully observed the actually given cracks by means of calculation based on the detected displacement values and their geometrical arrangement of the used sensor modules. And the robustness to the temperature is verified in the various temperature change.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.58-67
• /
• 2019

A design of an elliptic curve cryptography (ECC) processor that supports both pseudo-random curves and Koblitz curves over $GF(2^m)$ defined by the NIST standard is described in this paper. A finite field arithmetic circuit based on a word-based Montgomery multiplier was designed to support five key lengths using a datapath of fixed size, as well as to achieve a lightweight hardware implementation. In addition, Lopez-Dahab's coordinate system was adopted to remove the finite field division operation. The ECC processor was implemented in the FPGA verification platform and the hardware operation was verified by Elliptic Curve Diffie-Hellman (ECDH) key exchange protocol operation. The ECC processor that was synthesized with a 180-nm CMOS cell library occupied 10,674 gate equivalents (GEs) and a dual-port RAM of 9 kbits, and the maximum clock frequency was estimated at 154 MHz. The scalar multiplication operation over the 223-bit pseudo-random elliptic curve takes 1,112,221 clock cycles and has a throughput of 32.3 kbps.

• Korean Journal of Materials Research
• /
• v.3 no.4
• /
• pp.410-421
• /
• 1993

Phase equilibria and reaction paths of the superconducting phases and other compatible phases at $850^{\circ}C$ in the Bi-Sr-Ca-Cu-O system were studied. $Bi_2O_3$ was added to $Sr_2CaCu_2O_x$ by 5% up to 40 mole% Bi in the pseudo-binary $Bi_2O_3-(Sr_2CaCu_2O_x)$ system and the heat treated samples were analysed using XRD. SEM, EDS. and DT A. When Bi contents were greater than 35 mole% Bi, liquid phase was formed which was compatible with $Bi_2Sr_2CaCu_2O_8$ phase. The m.p. of $Bi_2Sr_2CaCu_2O_8$ phase decreased as the content of (Sr+Ca)decreased. $Bi_{2+x}Sr_2CaCu_2O_8$ phase first segregated out of liquid phase around $Bi_2Sr_2CaCu_2O_8$ phase during cooling of liquid phase.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.11
• /
• pp.637-644
• /
• 2014

This paper investigates the detection performance of fault location using STDR(sequence time domain reflectometry) and SSTDR(spread spectrum time domain reflectometry) with various length and types of sequences, and then, proposes an improved detection technique by eliminating the injected signal in SSTDR. The detection error rates are compared and analyzed in power line channel model with various fault locations, fault types, and spreading sequences such as m-sequence, binary Barker sequence, and 4-phase Frank sequence. It is shown that the proposed technique is able to improve the detection performance obviously when the reflected signal is weak or the fault location is extremely close.

• Journal of Environmental Science International
• /
• v.24 no.5
• /
• pp.671-678
• /
• 2015

The adsorption characteristics of Sr and Cs ions were investigated by using PS-zeolite beads prepared by immobilizing zeolite with polysulfone (PS). The adsorption kinetics of Sr and Cs ions by PS-zeolite beads was described well by the pseudo-second-order model. The maximum adsorption capacities of Sr and Cs ions calculated from Langmuir isotherm model were 65.0 mg/g and 76.4 mg/g, respectively. In the binary system of Sr ion and Cs ion, the adsorption capacities of each ion decreased with increasing mole ratio of mixed counterpart ion, and Cs ion showed the higher hinderance than Sr ion. We found that thermodynamic properties of Sr and Cs ions on absorption reaction were spontaneous and endothermic at 293 to 323 K.

• ETRI Journal
• /
• v.30 no.2
• /
• pp.268-274
• /
• 2008

This paper proposes an open-loop clock recovery circuit (CRC) using two high-Q dielectric resonator (DR) filters for 39.8 Gb/s and 42.8 Gb/s dual-mode operation. The DR filters are fabricated to obtain high Q-values of approximately 950 at the 40 GHz band and to suppress spurious resonant modes up to 45 GHz. The CRC is implemented in a compact module by integrating the DR filters with other circuits in the CRC. The peak-to-peak and RMS jitter values of the clock signals recovered from 39.8 Gb/s and 42.8 Gb/s pseudo-random binary sequence (PRBS) data with a word length of $2^{31}-1$ are less than 2.0 ps and 0.3 ps, respectively. The peak-to-peak amplitudes of the recovered clocks are quite stable and within the range of 2.5 V to 2.7 V, even when the input data signals vary from 150 mV to 500 mV. Error-free operation of the 40 Gb/s-class optical receiver with the dual-mode CRC is confirmed at both 39.8 Gb/s and 42.8 Gb/s data rates.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.7 no.2
• /
• pp.1-6
• /
• 2010

A new type fiber optic sensing system has been developed as a commercially available standard using the technique of hetero-core spliced fiber optic sensor, for the purposes of monitoring large scaled structures, preserving natural environments and measuring physical phenomenons. The sensing system has been tested and evaluated in a possible outdoor condition in view of the full scaled operation at actual sites to be monitored. Additionally, the developed system in this work conveniently provides us with various options of sensor modules intended to measure such physical quantities as displacement, distortion, pressure, binary states and liquid adhesion. The experiment study has been performed to examine the performance to a pseudo-cracking experiment in the outdoor situation, and to clarify temperature influences to the system in terms of the coupling of optical connectors and the OTDR stability. It has been verified that the sensing system is robust to the temperature change ranging from the general condition to the hard condition. Especially, in this study, the specification and performances of the pressure sensor have been demonstrated to show the capability of inspecting various physical quantities.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.12
• /
• pp.5058-5072
• /
• 2015

Quaternions have been commonly employed in color image processing, but when the existing pure quaternion representation for color images is used in perceptual hashing, it would degrade the robustness performance since it is sensitive to image manipulations. To improve the robustness in color image perceptual hashing, in this paper a full quaternion representation for color images is proposed by introducing the local image luminance variances. Based on this new representation, a novel Full Quaternion Discrete Cosine Transform (FQDCT)-based hashing is proposed, in which the Quaternion Discrete Cosine Transform (QDCT) is applied to the pseudo-randomly selected regions of the novel full quaternion image to construct two feature matrices. A new hash value in binary is generated from these two matrices. Our experimental results have validated the robustness improvement brought by the proposed full quaternion representation and demonstrated that better performance can be achieved in the proposed FQDCT-based hashing than that in other notable quaternion-based hashing schemes in terms of robustness and discriminability.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.1
• /
• pp.76-80
• /
• 2010

It is floating to security of information and the early assignment that it is important it processes and to transmit in inundations of information that I changed suddenly. I used the encryption/decryption process that applied simple substitution and mathematical calculation algorithm at theory and encryption transmission steps protective early information. Hardware and financial loss are using spurious random number to be satisfied with the random number anger that isn't real random number to size so much perfect information protection using One-time pad for applying this. I was transformed into serial test under a test to prove spurious random number anger, and it is into random number anger stronger, and the transformation serial test that proposes is proving it in algorithm speed and efficiency planes.

• The Korean Journal of Applied Statistics
• /
• v.20 no.1
• /
• pp.133-145
• /
• 2007

Local linear estimator has a number of advantages over the traditional kernel estimators. The better performance near boundaries is one of them. However, local linear estimator can produce erratic result in sparse regions in the realization of the design and to solve this problem much research has been done. Local linear quasi-likelihood estimator has many common properties with local linear estimator, and it turns out that sparse design can also lead local linear quasi-likelihood estimator to erratic behavior in practice. Several methods to solve this problem are proposed and their finite sample properties are compared by the simulation study.