• Journal of Food Hygiene and Safety
• /
• v.30 no.3
• /
• pp.272-280
• /
• 2015

A simultaneous official method was developed for the determination of phorate and its metabolites (phorate sulfoxide, phorate sulfone, phorate oxon, phorate oxon sulfoxide, phorate oxon sulfone) in livestock samples. The analytes were quantified and confirmed via liquid chromatograph-tandem mass spectrometer (LC-MS/MS) in positive ion mode using multiple reaction monitoring (MRM). Phorate and its metabolites were extracted from beef and milk samples with acidified acetonitrile (containing 1% acetic acid) and partitioned with anhydrous magnesium sulfate. Then, the extract was purified through primary secondary amine (PSA) and C18 dispersive sorbent. Matrix matched calibration curves were linear over the calibration ranges (0.005-0.5 mg/L) for all the analytes into blank extract with $r^2$ > 0.996. For validation purposes, recovery studies were carried out at three different concentration levels (beef 0.004, 0.04 and 0.2 mg/kg; milk 0.008, 0.04 and 0.2 mg/kg, n = 5). The recoveries were within 79.2-113.9% with relative standard deviations (RSDs) less than 19.2% for all analytes. All values were consistent with the criteria ranges requested in the Codex guidelines. The limit of quantification was quite lower than the maximum residue limit (MRL) set by the Ministry of Food and Drug Safety (0.05 mg/kg). The proposed analytical method was accurate, effective and sensitive for phorate and its metabolites determination and it will be used to as an official analytical method in Korea.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.115-116
• /
• 2012

The demand for flexible electronic systems such as wearable computers, E-paper, and flexible displays has increased due to their advantages of excellent portability, conformal contact with curved surfaces, light weight, and human friendly interfaces over present rigid electronic systems. This seminar introduces three recent progresses that can extend the application of high performance flexible inorganic electronics. The first part of this seminar will introduce a RRAM with a one transistor-one memristor (1T-1M) arrays on flexible substrates. Flexible memory is an essential part of electronics for data processing, storage, and radio frequency (RF) communication and thus a key element to realize such flexible electronic systems. Although several emerging memory technologies, including resistive switching memory, have been proposed, the cell-to-cell interference issue has to be overcome for flexible and high performance nonvolatile memory applications. The cell-to-cell interference between neighbouring memory cells occurs due to leakage current paths through adjacent low resistance state cells and induces not only unnecessary power consumption but also a misreading problem, a fatal obstacle in memory operation. To fabricate a fully functional flexible memory and prevent these unwanted effects, we integrated high performance flexible single crystal silicon transistors with an amorphous titanium oxide (a-TiO2) based memristor to control the logic state of memory. The $8{\times}8$ NOR type 1T-1M RRAM demonstrated the first random access memory operation on flexible substrates by controlling each memory unit cell independently. The second part of the seminar will discuss the flexible GaN LED on LCP substrates for implantable biosensor. Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as the future flexible display technology and a type of implantable LED biosensor for a therapy tool. The final part of this seminar will introduce a highly efficient and printable BaTiO3 thin film nanogenerator on plastic substrates. Energy harvesting technologies converting external biomechanical energy sources (such as heart beat, blood flow, muscle stretching and animal movements) into electrical energy is recently a highly demanding issue in the materials science community. Herein, we describe procedure suitable for generating and printing a lead-free microstructured BaTiO3 thin film nanogenerator on plastic substrates to overcome limitations appeared in conventional flexible ferroelectric devices. Flexible BaTiO3 thin film nanogenerator was fabricated and the piezoelectric properties and mechanically stability of ferroelectric devices were characterized. From the results, we demonstrate the highly efficient and stable performance of BaTiO3 thin film nanogenerator.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.3
• /
• pp.2053-2058
• /
• 2013

Background: Formation of new blood vessels is necessary for the development and spread of neoplasms more than 1 mm3 in volume, angiogenesis being responsible for formation of new from pre-existing blood vessels. Vascular endothelial growth factor (VEGF) is pivotal and the best studied angiogenic factor in all human cancers. Therefore we designed this study to investigate the role of VEGF-A and VEGF-C in prostate cancer in comparison with BPH controls in a north Indian population. Methods: In this case-control study a total of 100 subjects were included on the basis of confirmed histopathological reports, out of which 50 were prostate cancer patients and the other 50 were BPH patients with PSA levels >2 ng/ml and abnormal digital rectal examination (DRE) findings during September 2009 to August 2011 from the Department of Urology, KGMU, Lucknow, India. Plasma levels of VEGF were determined using quantitative immunoassay (ELISA-enzyme linked immunosorbent assay). Statistical analysis was carried out using SPSS 15.0 version. Results: The mean age of prostate cancer ($67.6{\pm}5.72$) patients was significantly higher (p=0.005) than BPH ($63.6{\pm}7.92$) patients. Expression of VEGF-A was not significantly higher in disease stage C1 than D1 or D2 and A or B (p=0.13) while the level of VEGF-A was significantly higher (p=0.04) in prostate cancer as compared to BPH subjects (PCa=13.0 pg/ml, BPH=6.8 pg/ml). Levels of VEGF-C were similar in both groups (PCa=832.6 pg/ml, BPH=823.7 pg/ml). In ROC curve, the area under curve (AUC) was 0.70 (95%CI: 0.60-0.80) and the cut-off value for which a higher proportion of patients was correctly classified (20%) was 26.0 pg/mL. Conclusion: Although VEGF-A is increased in cancer prostate patients a statistically significant correlation could not be established in this study. VEGF-C was not found to be a useful biomarker.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.3
• /
• pp.203-210
• /
• 2023

Ferimzone Z is a fungicide for effectively controlling rice blast. Under light irradiation conditions, it undergoes a rapid conversion to its E-stereoisomer. Given the importance of isomers in risk assessments of residues in crops, an analytical method was developed for individual isomer quantification. A comparative analysis performed using two columns in HPLC-MS/MS demonstrated that the isomers were successfully separated using the Cadenza column. For the brown rice sample preparation, 5 g of the homogenized sample was saturated with 7 mL of water. The sample was then extracted with a 10 mL mixed solvent of acetonitrile and ethyl acetate (1:1, v/v) that contained 0.1% formic acid, and it was subsequently partitioned with magnesium sulfate and sodium chloride. The upper layer was purified using dSPE containing C₁₈ and PSA sorbents. The established method was subjected to method validation, and it showed recovery rates of 90.6-98.8% (RSD ≤ 3.9%) at concentrations of 0.01, 0.1, 2 mg/kg, with a soft matrix effect (%ME) ranging from -3.1% to +6.5%. This method can be employed in monitoring studies of brown rice to determine the conversion ratio from the Z isomers to the E isomers.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.365-376
• /
• 2020

Immature embryogenesis is a useful process in wheat tissue culture, including transgenic technology, because of its high regeneration efficiency compared to that in other tissues. However, it is a very labor-intensive and time-restrictive method, because the preparation of immature embryos is limited to the optimal time after flowering. In this experiment, 'Speed Breeding', a breeding technique that accelerates breeding generation advancement by extending the photoperiod, was applied to the wheat variety 'Bobwhite'. A controlled growth room was constructed by adjusting the photoperiod (22-hour light/2-hour dark) using LED lights at temperature of 22℃. After vernalization of the Bobwhite seeds at 4℃ for 4 weeks, the seedlings were grown in a controlled growth room and a greenhouse to compare the heading date. In both conditions, calli were induced from immature embryos on the 11^th day after flowering. After 4 weeks, the calli were transferred to a regeneration medium. Regeneration efficiencies under greenhouse conditions and Speed Breeding conditions were determined as 45.05% and 43.18%, respectively. Antioxidant enzyme activity and reference gene expression analysis were performed to confirm the presence of stress due to an extremely long-day photoperiod. As a result, the antioxidant enzyme activity was not distinguished from that of the greenhouse condition. The reference gene expression analysis revealed that the PsaA and CDC genes were highly expressed under the Speed Breeding condition. However, expression of PsbA was similar expression in both conditions. These results will provide useful information for the application of immature embryogenesis to the wheat transformation system.

• Clinical and Experimental Reproductive Medicine
• /
• v.27 no.1
• /
• pp.9-14
• /
• 2000

Objective: The sperm acrosome reaction is a $Ca^{2+}$-dependent exocytotic event that is triggered by adhesion to the mammalian egg's zona pellucida. Previous studies suggested a role of $Ca^{2+}$ channels in acrosome reactions. This study was conducted to investigate the T-type calcium channel is operated in acrosome reaction of human spermatozoa. Method: Human semen samples were obtained from healthy donors with normal criteria. The spermatozoa were divided into five groups: Group 1 were non-treated as a control; Group 2 where spermatozoa were exposed to 5 ${\mu}M$ $Ca^{2+}$ A23187 $(Ca^{2+}i)$; Group 3 where spermatozoa were exposed 5 ${\mu}M$ $Ca^{2+}i$ and mibefradil; Group 4 where spermatozoa were exposed 5 ${\mu}M$ $Ca^{2+}i$ and nifedipine, and Group 5 where spermatozoa were treated with 5 ${\mu}M$ $Ca^{2+}i$ and both of mibefradil and nifedipine. Spermatozoa in all groups were retrieved after incubation for 15 and 30 minutes at $37^{\circ}C$. After staining with PSA-FITC, fluorescence was observed under a fluorescence microscope, and AR was evaluated on a total>100 spermatozoa/side. Result and Conclusion: We observed on acrosome reaction inhibition rate in human spermatozoa the various of concentration of mibefradil, nifedipine. Maximum response was noted with 1.0 ${\mu}M$ mibefradil and the decrease of acrosome reaction inhibition rate 45%. Nifedipine in acrosome reaction inhibition rate was only about 25%. The $Ca^{2+}i$-induced AR of spermatozoa was significantly suppressed by mibefradil. Incidence of the suppression was depending on concentration of mibefradil. Results from the present study suggest that the human spermatozoa possess T-type channel. The observation that reversible inhibitor of T channels in male germ cells provides a new mechanism of contraceptive action.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.47-58
• /
• 2011

Halogen free intumescent flame retardants(IFRS), such as the mixture of melamine phosphate(MP) and char forming agents(pentaerythritol(PER), di-pentaerythritol(DiPER), tris(2-hydroxyethyl) isocyanurate(THEIC)), were prepared and characterized. Polypropylene(PP)/$IFR_S$ composites were also prepared in the presence of ethylene diamine phosphate(EDAP) as a synergist and used into flame retardant PP powder coatings. Thermoplastic PP powder coatings at 20 wt% flame retardant loading were manufactured by extruded and then mechanical cryogenic crushed to bring them in fine powder form. These intumescent flame retardant powder coatings($IFRPC_S$) were applied on mild steel surface for the purpose of protection and decorative. It is a process in which a $IFRPC_S$ particles coming in contact with the preheated mild steel surface melt and form a thin coating layer. The obtained MP flame retardant was analyzed by utilizing FTIR, solid-state $^{31}P$ NMR, ICP, EA and PSA. The mechanical properties as tensile strength, melt flow index(MFI) and the thermal property as TGA/DTA and the fire safety characteristics as limiting oxygen index(LOI), UL94 test, SEM were used to investigate the effect of $IFRPC_S$. The experimental results show that the presence of $IFR_S$ considerably enhanced the fire retardant performances as evidenced by the increase of LOI values 17.3 vol% and 32.6 vol% for original PP and $IFRPC_S$-3(PP/MP-DiPER/EDAP), respectively, and a reduction in total flaming combustion time(under 15 sec) in UL94 test of $IFRPC_S$. The prepared $IFRPC_S$-3 have good comprehensive properties with fire retardancy 3.2 mm UL94 V-0 level, LOI value 32.6%, tensile strength $247.3kg/cm^2$, surface roughness Ra $0.78{\mu}m$, showing a better application prospect. Through $IFRPC_S$-2(PP/MP-PER/EDAP) and $IFRPC_S$-3 a better flame retardancy than that of the $IFRPC_S$-1(PP/MP/EDAP) was investigated which was responsible for the formed more dense and compact char layer, improved synergy effect of MP and PER/DiPER.

• Analytical Science and Technology
• /
• v.25 no.2
• /
• pp.146-151
• /
• 2012

An analytical method was developed for the measurement of uranium isotope in ground water using the liquid scintillation counting technique. A LKB Wallac Quantulus 1220 liquid scintillation counter (LSC) equipped with pulse shape analyzer (PSA) and a solvent extraction method were used for the measurement of uranium isotope in ground water samples. The effect of solution volume on the extraction efficiency was evaluated for 100 to 1000 mL solutions using a NIST standard reference material (NIST SRM 4321C). The effect of groundwater pH on the extraction efficiency was also investigated for pH ranging from 0.5 to 10. It was found that the extraction efficiency had a strong dependence on pH showing a maximum at pH 2. In contrast, the effect of groundwater volume on the extraction efficiency was negligible in the range investigated. According to the method, the extraction efficiency of uranium isotopes was near 96% and the lower detection limit for uranium was 0.018 Bq/L with the counting time of 300 min. The result of this study was also verified by the conventional ICP-MS measurement. It is demonstrated that the suggested method is valuable to the determination of the optimum extraction and measurement conditions for uranium in ground water. The method was successfully applied to the ground water at four locations near the Daejeon province. It was found that the uranium content and the isotopic ratio of $^{234}U/^{238}U$ at the locations ranged 0.59~6.69 Bq/L and 0.72~1.40, respectively.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.609-614
• /
• 2010

In this study, emulsion polymerizations for synthesizing acrylic pressure-sensitive adhesive(PSA) were carried out using 2-ethylhexyl acrylate(2-EHA), n-butyl acrylate(n-BA), methyl metacrylate(MMA) as fundamental monomers and acrylic acid(AAc) as a functional monomer in the presence of anionic SLS (sodium lauryl sulfate). To obtain the optimized synthetic condition in the polymerization, we analyzed the polymerization variables such as the effect of surfactant concentration and hydrophilic lipophilic values(HLB). At the same time, the final adhesive properties were also analyzed by the function of the initiator concentration and buffer concentration. In the results, the most stable emulsion was obtained at the surfactant concentrations between 3 and 5 wt%. It was also determined the effect of HLB value of nonionic surfactant and the initiator concentrations on the gel content. Stable emulsion is obtained using the surfactant having HLB value of 12.3. The rate of emulsion polymerization was increased at the initiator concentration greater than 1 wt%, but the stability of the emulsion was decreased. Finally, the effect of the buffer concentrations on the pH and the conversion of the acrylic emulsion product were experimentally measured. At the sodium bicarbonate concentration above 0.4 wt%, the buffer infulence was apparent. The buffer effect was fully acceptable at the concentrations between 0.6 and 0.8 wt% regardless of the monomer composition.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.5
• /
• pp.2165-2168
• /
• 2014

Background: Today, survival rate of patients with chronic renal failure/hemodialysis has increased so that chronic illnesses are more likely to occur. Cancer is the main cause of morbidity and mortality in such patients. Aim: In this study, physician attitudes were examined about cancer screening in patients with renal failure. Materials and Methods: This study was done by face to face questionnaire in the $27^{th}$ National Nephrology Congress to determine if the physicians dealing with chronic renal failure, hemodialysis or renal transplanted patients, recommend cancer screening or not and the methods of screening for cervix, prostate, breast and colon cancer. Results: One hundred and fifty six physicians were included in the survey. A total of 105 (67%) participants were male and the age of responders was $48{\pm}9$ years. About 29% were specialists in nephrology, 28% internal medicine, and 5% were other areas of expertise. Some 48% of participants were hemodialysis certified general practitioners. Patients were grouped as compensated chronic renal failure, hemodialysis or renal transplanted. Of the 156 responders, 128 (82%) physicians recommended breast cancer screening and the most recommended subgroup was hemodialysis patients (15%). The most preferred methods of screening were combinations of mammography, self breast examination and physicianbreast examination. 112 (72%) physicians recommended cervix cancer screening, and the most preferred method of screening was pap-smear. Colon cancer screening was recommended by 102 (65%) physicians and prostate screening by 109 (70%) physicians. The most preferred methods of screening were fecal occult blood test and PSA plus rectal digital test, respectively. Conclusions: It is not obvious whether cancer screening in renal failure patients is different from the rest of society. There is a variety of screening methods. An answer can be found to these questions as a result of studies by a common follow-up protocol and cooperation of nephrologists and oncologists.