• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.7
• /
• pp.3167-3171
• /
• 2016

Prostate cancer (PCa) is one of the most common diseases in men. It is important to assess prognostic factors and whether high cortisol levels and complex hormonal interactions could be responsible for PCa development. We evaluated the relationship between cortisol, leptin and estrogens in 141 men, 71 with PCa and the remaining 70 constituting a low risk group (LRG). They were recruited for this study from a total of 2906 middle-aged men (ages 45-70 years) who completed an evaluation for prostatic diseases at the Urology Division, Hospital de Clínicas "$Jos{\acute{e}}$ de San $Mart{\acute{i}}n$", University of Buenos Aires, in May 2009. In this cross sectional study, cortisol, PSA, total-testosterone, free-testosterone, bioavailable testosterone, LH and estradiol were measured in serum. We observed increased cortisol levels in PCa patients as compared to LRG cases (p=0.004,). Leptin and estradiol levels were also higher in PCa patients (p=0.048; p<0.0001, respectively). Logistic regression analysis indicated that serum cortisol (OR: 1.110 (95% CI 1.016-1.213), p=0.022), estradiol (OR: 1.044 (95% CI 1.008-1.081), p=0.016) and leptin (OR: 1.248 (95% CI 1.048-1.487), p=0.013) explained 27% of the variance of dependent variables, even after adjusting for age, smoking, BMI and waist circumference. We found increased cortisol levels in PCa patients as compared to LRG, as well as an altered circulating hormonal profile.

• Research in Plant Disease
• /
• v.23 no.1
• /
• pp.1-18
• /
• 2017

Pseudomonas syringae pv. actinidiae, the causal agent of bacterial canker, is currently causing severe economic losses to kiwifruit production worldwide. The pathogen has affected green-fleshed kiwifruit cutlivars and yellow-fleshed kiwifruit cultivars since 1988 and 2006 in Korea, respectively. In recent years, the biovar 3 strains of P. syringae pv. actinidiae were introduced through imported contaminated pollens and have rapidly spread to neighboring kiwiruit orchards by secondary infection, leading to outbreaks of bacterial canker and tremendous damages on yellow- and red-fleshed kiwifruit cultivars. In this review, we summarize the various management practices of bacterial canker of kiwifruit such as disease escaping, cultural practices, blocking of dissemination, early diagnosis, eradication of inoculum sources, chemical control, and trunk injection on the basis of our research works and field experiences and important research products conducted during the last three decades in the world. Finally, we propose a manual for the efficient management of the disease that can be practically utilized at the farmers' orchards in order to keep kiwifruit vines healthy in the future.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.4
• /
• pp.305-312
• /
• 2008

ZnO/Zn redox cycle is the one of the promising thermochemical cycles for hydrogen production via water splitting with high temperature heat source like a concentrated solar energy. This paper reports the particle size effect of Zinc on water splitting behavior. Water splitting reaction experiments were carried out at isothermal conditions of 350 and 400$^{\circ}C$ in TGA (Thermo Gravimetric Analyzer) using four commercial Zinc powders (nano, <10 ${\mu}m$, <150 ${\mu}m$ and $150{\sim}600\;{\mu}m$ particle sizes). Before the experiments, average particle size of Zinc powders was analyzed by PSA (Particle Size Analysis). After the experiments, XRD (X-Ray Diffraction) and SEM (Scanning Electron Microscope) analyses were conducted on the samples. The experimental results showed that particle size had a effect on the conversion of Zinc to ZnO. Zinc conversion was increased, as the particle size decreased. Especially, the nano size particles were aggregated and the particle's morphology changed on the surface during hydrolysis reaction.

• Journal of Powder Materials
• /
• v.27 no.3
• /
• pp.233-240
• /
• 2020

Nano-sized ZnSe particles are successfully synthesized in an aqueous solution at room temperature using sodium borohydride (NaBH₄) and thioglycolic acid (TGA) as the reducing agent and stabilizer, respectively. The effects of the mass ratio of the reducing agent to Se, stabilizer concentration, and stirring time on the synthesis of the ZnSe nanoparticles are evaluated. The light absorption/emission properties of the synthesized nanoparticles are characterized using ultraviolet-visible (UV-vis) spectroscopy, photoluminescence (PL) spectroscopy, and particle size analyzer (PSA) techniques. At least one mass ratio (NaBH4/Se) of the reducing agent should be added to produce ZnSe nanoparticles finer than 10 nm and to absorb UV-vis light shorter than the ZnSe bulk absorption wavelength of 460 nm. As the ratio of the reducing agent increases, the absorption wavelengths in the UV-vis curves are blue-shifted. Stirring in the atmosphere acts as a deterrent to the reduction reaction and formation of nanoparticles, but if not stirred in the atmosphere, the result is on par with synthesis in a nitrogen atmosphere. The stabilizer, TGA, has an impact on the Zn precursor synthesis. The fabricated nanoparticles exhibit excellent photo-absorption/discharge characteristics, suggesting that ZnSe nanoparticles can be alloyed without the need for organic solutions or high-temperature environments.

• Journal of Industrial Technology
• /
• v.25 no.A
• /
• pp.151-156
• /
• 2005

Auto exhausts and air pollution can become trapped in the cabin of vehicle, reducing the amount of oxygen available for breathing. Driver may feel sleepy, headaches, nausea, confusion, dizziness and lower levels of oxygen can damage the driver's general health. Consequently, oxygen generator purified oxygen into the car to help driver get the oxygen driver's body needs. In this study, in order to evaluate the oxygen generator performance, the samples that the various conditions(humidity(50%, 100%), flow and oxygen concentration) were examined. There were three types of oxygen generator; sample 1($2.5{\ell}/min$, $36%O_2$), sample 2($4.5{\ell}/min$, $41%O_2$) and sample 3($5{\ell}/min$, $39%O_2$). As the humidity increased from 50% to 100%, the oxygen concentration of the sample 1(36%), 2(41%) and 3(39%) was reduced $31%O_2$, $38%O_2$ and $38%O_2$, respectively. Also, the each sample measured that effect of human in car on oxygen concentration, if the oxygen concentration is one person in car, each sample of oxygen concentration was $20.8%O_2$, $23.7%O_2$ and $21.2%O_2$. From the above results, it was shown that oxygen generator for car, if the oxygen concentration is increased, effect of humidity is reduced, and that in the sample of supplying a high-rate of oxygen, the oxygen concentration is increased. It was suggested that effect of humidity on oxygen generator for car can be reduced according to the supply of oxygen.

• Nuclear Engineering and Technology
• /
• v.36 no.1
• /
• pp.112-120
• /
• 2004

The purpose of this paper is to analyze the piping failure frequency for the main feedwater system in domestic nuclear power plants(NPPs) for the application to an in-service inspection(ISI), leak before break(LBB) concept, aging management program(AMP), and probabilistic safety analysis(PSA). First, a database was developed for piping failure events in domestic NPPs, and 23 domestic piping failure events were collected. Among the 23 events, 12 locations of wall thinning due to flow accelerated corrosion(FAC) were identified in the main feedwater system in 4 domestic WH 3-loop NPPs. Two types of the piping failure frequency such as the damage frequency and rupture frequency were considered in this study. The damage frequency was calculated from both the plant population data and damage(s) including crack, wall thinning, leak, and/or rupture, while the rupture frequency was estimated by using both the well-known Jeffreys method and a new method considering the degradation due to FAC. The results showed that the damage frequencies based on the number of the base metal piping susceptible to FAC ranged from $1.26{\times}10^{-3}/cr.yr\;to\;3.91{\times}10^{-3}/cr.yr$ for the main feedwater system of domestic WH 3-loop NPPs. The rupture frequencies obtained from the Jeffreys method for the main feedwater system were $1.01{\times}10^{-2}/cr.yr\;and\;4.54{\times}10^{-3}/cr.yr$ for the domestic WH 3-loop NPPs and all the other domestic PWR NPPs respectively, while those from the new method considering the degradation were higher than those from the Jeffreys method by about an order of one.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.5
• /
• pp.212-217
• /
• 2021

The applicability of the white LED from the blue LED of the coating film as a binder for surface and curved coatings were confirmed. The particle size of YAG is D₅₀: 9~10 ㎛, and the crystal structure is garnet (Y₃Al₅O₁₂), cubic. The coating film had no cracks, at the same time, the silica sol was uniformly coated with YAG phosphor, and the YAG content and thickness in the coating film showed a tendency to increase up to 40 ㎛ in proportion to the increase in the amount added. Furthermore, as the YAG content increased, the PL emission intensity increased and the color coordinate shift toward the end of the chromatic locus curve was confirmed.

• The Korean Journal of Urological Oncology
• /
• v.16 no.3
• /
• pp.126-134
• /
• 2018

Purpose: The purpose of this study is to compare the radiation therapy (RT) and radical prostatectomy (RP) of high-risk or locally advanced prostate cancer (PC) patients after neoadjuvant hormonal therapy (NHT). Materials and Methods: This retrospective study evaluated patients underwent RT (42 patients) or RP (152 patients) after NHT at a single center during 2003-2014. Times to biochemical recurrence (BCR), pelvic local recurrence (PLR), metastasis, clinical painful symptom progression (CPSP), castration-resistant PC (CRPC), and overall survival were compared between the RT and RP groups, after adjustment for TN stage, using the Kaplan-Meier method and log-rank test. Results: Significant inter-group differences were observed for age, Gleason score, initial PSA, and clinical and pathological T stages (all p<0.05). During a median follow-up of 71.7 months, the overall incidences of BCR, PLR, metastasis, CPSP, CRPC, and death were 49.5%, 16.5%, 8.3%, 7.7%, 7.7%, and 17.5%, respectively. The median times to BCR were 100 months for RT and 36.2 months for RP (p=0.004), although the median times were not reached for the other outcomes (all p>0.05). The independent predictor of CPSP was RP (hazard ratio, 0.291; p=0.013). Conclusions: Despite significantly different baseline parameters, RP provided better CPSP-free survival than RT among patients with localized high-risk or locally advanced PC.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.6
• /
• pp.220-225
• /
• 2020

Gallium oxide nano-powder, the key starting material for IGZO target, is fabricated by gas phase synthesis using a new apparatus consist of reaction, transportation, and collection parts. As a result of gallium metal evaporation above 1150℃, Ga2O3 nano-powders, are successfully synthesized. The SEM images of the synthesized powders displace the spherical shaped powders without severe agglomeration. X-ray diffraction and PSA analysis show that the higher temperature at the reaction part results in the better crystallinity and larger powder size of the synthesized Ga2O3. To see the applicability to IGZO target, Ga2O3 nano-powders synthesized at 1250℃ are mixed with indium oxide and zinc oxide (In2O3 : Ga2O3 : ZnO = 1 : 1 : 1), and then sintered at 1400~1500℃. The highest sintered density of 5.83 g/㎤ (= 91 % of relative density) is achieved when sintered at 1450℃, showing better sinterability compared to the commercially available Ga2O3 powder, which has 5.61 g/㎤ of sintered density at the same condition.

• Journal of Adhesion and Interface
• /
• v.23 no.3
• /
• pp.80-86
• /
• 2022

In this study, water-based acrylic tackifier with different contents of 1-dodecanethiol(n-DM), a chain transfer agent(CTA), were synthesized to improve the performance and adhesive properties of water-based acrylic pressure sensitive adhesive(PSA). In order to investigate the change in physical properties according to the amount of water-based acrylic tackifier added, 10/20/30 phr of water-based acrylic tackifier was added to the water-borne acrylic emulsion to measure the physical properties. The molecular weight and glass transition temperature(T_g) of the synthesized water-based acrylic tackifier tended to decrease as the content of n-DM increased. When a water-based acrylic tackifier was added to the water-borne acrylic emulsion, the peel strength and heat-resistance were increased. Also, when the water-based acrylic tackifiers were added at 10 phr or 20 phr, the best value was shown.