• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.4
• /
• pp.107-112
• /
• 2005

In this study, the dynamic analysis is performed fur predicting the transmitted force to flexible human body induced by prototype HIF(High Impulsive force) device operation, which is partially assembled by major parts. A beam-mass model and a shear-structure model are used for the flexible mount structure and their dynamic behavior are investigated by experimental results under rigid/flexible mount conditions using a general purpose device. From the test result of prototype device in rigid mount condition, the transmitted force to human body which can not be measured directly, is estimated based on the proved mount structure model.

• Asia pacific journal of information systems
• /
• v.3 no.1
• /
• pp.125-154
• /
• 1993

Almost all result for group decision support systems (GDSS) have been obtained in a United States context, based on conventions and culture of American group processes. This paper reports on the construction and testing of a prototype GDSS to support international negotiation. The system was shown to work and to provide gains in both the quality of the interaction and the attitude toward the decision reached. Although the prototype system is narrow in scope, focusing on two specific cultures and a single scenario and uses simple and limited technology, the results obtained suggest that computer-based intercultural GDSS can help people in staving focused, in managing the added complexity of multinational negotiation, and in interacting effectively with one another.

• Journal of Power System Engineering
• /
• v.19 no.4
• /
• pp.82-88
• /
• 2015

The purpose of this study is to investigate the effect of the impinging plate on combustion process in Diesel engine. Especially, the variation of exhaust emission and engine performance by the change of fuel injection timing and fuel injection pressure between the trial engine with impinging plate and the prototype engine were examined. The nitrogen oxide concentration of the trial engine decreased more than 50% compared to the prototype engine, however, smoke concentration of the trial engine indicated higher degree than the prototype engine. The smoke concentration, fuel consumption rate and exhaust gas temperature decreased as the fuel injection timing become faster, whereas the nitrogen oxide concentration decreased as the fuel injection timing is retarded. The nitrogen oxide concentration, fuel consumption rate and exhaust gas temperature decreased as the fuel injection pressure become lower. But smoke concentration decreased as the fuel injection pressure become higher.

• Journal of Power System Engineering
• /
• v.11 no.4
• /
• pp.26-31
• /
• 2007

Recently, study on the improvement of combustion performance for the diesel engine by using the impinging spray in the combustion chamber has been actively studied. The purpose of this study is to examine the variation of exhaust emission between the trial engine with impinging plate and the prototype engine in accordance with change of fuel injection timing and fuel injection pressure. The concentration of nitrogen oxide of trial engine decreased more than 50% compared to prototype engine. However, smoke of trial engine indicated very high concentration compared to prototype engine. The effect of fuel injection timing on the nitrogen oxide and smoke indicated different results, that is, the concentration of nitrogen oxide decreased as the degree of fuel injection start become slower, whereas the concentration of smoke decreased as the degree of fuel injection start become faster.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.382-387
• /
• 2012

A virtual prototype (VP) model of the rotor-to-stator rub of the rotor system is established to study the nonlinear vibration characteristics. The non-linear bearing stiffness is considered to approximate to an actual system in the model. In order to validate the effectiveness of the proposed approach, a special structure of stator is designed to simulate different kinds of rub condition. The results of experiment are well consistent with the results of simulation by VP. The vibration characteristics of rub-impact are well observed by VP model under different conditions. Based on the validated model, the torsional vibration of rub-impact is discussed. The contribution of this paper is to provide one new approach to study rub-impact problem. Based on the validated VP model, the more research can be done for incident fault identification.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.46.3-46.3
• /
• 2019

We present the control software and its development process for a prototype of the Camera and Grating Articulation System (CGAS) for GMACS, a wide-field, multi-object, moderate-resolution optical spectrograph for the Giant Magellan Telescope (GMT). The CGAS prototype is currently designed for the camera articulation controller as a miniature model of the GMACS. The camera articulation package (CAP) is a software that controls two stepper motors to adjust the camera angle. The package is developed using Visual C++ and runs on Windows 10. We discuss the architectural design and communication route between the high-end user software and the electronics hardware.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_1
• /
• pp.977-983
• /
• 2023

The tank uses a twin turbo diesel engine equipped with two turbocharger systems for high output. The main component of the turbocharger system is the turbine housing through which the exhaust flows. Turbine housing is manufactured through a sand casting process, taking into account the shape and material characteristics according to the environmental conditions in which it is used. Currently, turbine housing is imported, and local production is necessary. In this study, basic research was conducted to localize the turbine housing of a tank diesel turbo engine. Reverse engineering and finite element analysis of the imported turbine housing were performed. The prototype of the turbine housing was printed using FDM and PBF 3D printers. The prototype of the turbine housing printed with an FDM 3D printer has an overall appearance similar to 3D modeling, but the printed surface of the whorl part is rough. The prototype printed with the PBF 3D printer is completely identical to the 3D modeling, including the whorl part.

• Journal of the Optical Society of Korea
• /
• v.19 no.4
• /
• pp.421-426
• /
• 2015

This paper presents a hybrid single optical system for an LED surgical light that combines the advantages of both lens- and reflector-type single optical systems. The proposed hybrid single optical system includes a lens in the center and the LED light originating from the lens is redirected using a reflector to achieve a high beam spread. Iterative optical software simulations are used to provide data for the design of the lens and reflector for a single optical system, and for a complex optical system for the LED light assembly. The resulting data is also used to fabricate a prototype system. Experiments using the prototype of the hybrid single optical system and a mock-up LED surgical light confirm the system's shadow dilution performance and its applicability to surgical operations.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.288-292
• /
• 1993

This paper summerizes a prototype central control system of distribution automation system, which is a result of project carried out by KERI and 6 companies. Of the many possible systems, feeder automation oriented system is described. Control hardware system is composed of one super-mini and 2 workstations. Two kinds of commercial softwares, DBMS and graphic tools, are adopted. Three component system of the hardware has its own role, host system for DB managent, F.A. program running, communication scheduling, and etc., two workstations for communication node and graphic interface node. System management program, feeder automation program including load forcasting, communication scheduling and supervisory contorl functions are developed on the basis of above hardware and properly designed protocol, communication system and terminals.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.519-526
• /
• 1994

In the large and multifunctional engineering system, the heterogeneous computer system situation is inevitable. Accordingly a lot of integration efforts are being made to comply with the industrial requirement of productivity. In this paper, a practical concept of integration is introduced through the development of a prototype system for ship outfitting design which is a typical example of large/multi-functional application system. On the development of the prototype system, three points are considered as a practical concept-which are integration of database, integration of application programs, and system-user interface. The relation model based commercial database management system(RDBMS) is used to build the project integrated database, and the graphical user interface tool(OSF/Motif) on X-window system is used for the integration of application programs and the user interface.