• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권5호
• /
• pp.364-370
• /
• 2000

A large-signal average model for the controlled on-time boost power factor correction(PFC) circuit is developed and subsequently linearized resulting in a small-signal model for the PFC circuit. Ac analyses are performed using the small-signal model, revealing new results new on small-signal dynamics of the PFC circuit. The analysis results and model predictions are confirmed with experimental measurements on 200W prototype PFC circuit.

• Journal of Information Processing Systems
• /
• 제10권4호
• /
• pp.543-554
• /
• 2014

It is difficult for mobile learners to maintain a high level of concentration when learning content for more than an hour while they are on the move. Despite the attention span issue, many m-learning systems still provide their mobile learners with the same content once used in e-learning systems. This has called for an investigation to identify the suitable characteristics of the m-learning environment. With this in mind, we have conducted a survey in hopes of determining the requirements for developing more suitable m-learning content. Based on the results of the survey, we have developed a content model comprised of two types: a segment type and a supplement type. In addition, we have implemented a prototype system of the content model for Apple iPhones and Android smartphones in order to investigate a feasibility study of the model application.

• Smart Structures and Systems
• /
• 제23권4호
• /
• pp.393-403
• /
• 2019

Applying more features gives us better accuracy in modeling; however, increasing the inputs causes the curse of dimensions. In this paper, a new structure has been proposed for fault detecting and identifying (FDI) of high-dimensional systems. This structure consist of two structure. The first part includes Auto-Encoders (AE) as Deep Neural Networks (DNNs) to produce feature engineering process and summarize the features. The second part consists of the Local Model Networks (LMNs) with LOcally LInear MOdel Tree (LOLIMOT) algorithm to model outputs (multiple models). The fault detection is based on these multiple models. Hence the residuals generated by comparing the system output and multiple models have been used to alarm the faults. To show the effectiveness of the proposed structure, it is tested on single-shaft industrial gas turbine prototype model. Finally, a brief comparison between the simulated results and several related works is presented and the well performance of the proposed structure has been illustrated.

• KEPCO Journal on Electric Power and Energy
• /
• 제6권4호
• /
• pp.473-480
• /
• 2020

In this paper, we proposed a high frequency equivalent circuit considering parasitic impedance components for differential noise analysis on the input stage during DC-DC buck converter switching operation. Based on the proposed equivalent circuit model, we presented a method to measure parasitic impedance parameters included in DC bus plate, IGBT, and PCB track using the gain phase method of a network analyzer. In order to verify the validity of this model, a DC-DC prototype consisting of a buck converter, a signal analyzer, and a LISN device, and then resonance frequency was measured in the frequency range between 150 kHz and 30 MHz. The validity of the parasitic impedance measurement method and the proposed equivalent model is verified by deriving that the measured resonance frequency and the resonance frequency of the proposed high frequency equivalent model are the same.

• 터널과지하공간
• /
• 제23권5호
• /
• pp.372-382
• /
• 2013

고준위폐기물처분장에 대한 열-수리-역학적 거동 모델링은 처분장의 성능 및 안전성 평가를 위해서 선행되어야 할 중요한 연구과제이다. 본 연구에서는 $\ddot{A}$sp$\ddot{o}$ 원형처분장의 열적 거동을 해석하고, 현장 실험데이터와의 비교를 통해 모델 계산결과의 타당성을 검증하였다. 모델 시뮬레이션에서는 처분공과 처분터널 및 그 주변 암반에 대한 온도분포를 분석하였다. 현장 실험데이터와의 비교는 처분공 DH-6를 대상으로 수행하였다. 그 결과 모델 계산치는 측정위치에 따라 실험치 보다 약 2-$5^{\circ}C$ 정도 높은 온도값을 보였으나, 온도변이 곡선은 비슷한 패턴을 보여 주었다. 실험치와 모델 계산치의 이러한 차이는 모델에 의한 열적거동 해석에서 암반을 제외한 완충재, 벤토나이트 펠렛, 뒷채움재 내의 수리학적 및 역학적 거동을 고려하지 않았기 때문으로 판단되었다.

• Structural Engineering and Mechanics
• /
• 제43권3호
• /
• pp.371-394
• /
• 2012

Accurate finite element (FE) models are needed in many applications of Civil Engineering such as health monitoring, damage detection, structural control, structural evaluation and assessment. Model accuracy depends on both the model structure (the form of the equations) and the model parameters (the coefficients of the equations), and can be generally improved through that process of experimental reconciliation known as model updating. However, modelling errors, including (i) errors in the model structure and (ii) errors in parameters excluded from adjustment, may bias the solution, leading to an updated model which replicates measurements but lacks physical meaning. In this paper, an application of ambient-vibration-based model updating to a large-scale benchmark prototype of a building structure is reported in which both types of error are met. The error in the model structure, originating from unmodelled secondary structural elements unexpectedly working as resonant appendages, is faced through a reduction of the experimental modal model. The error in the model parameters, due to the inevitable constraints imposed on parameters to avoid ill-conditioning and under-determinacy, is faced through a multi-model parameterization approach consisting in the generation and solution of a multitude of models, each characterized by a different set of updating parameters. Results show that modelling errors may significantly impair updating even in the case of seemingly simple systems and that multi-model reasoning, supported by physical insight, may effectively improve the accuracy and robustness of calibration.

• Journal of Biosystems Engineering
• /
• 제13권4호
• /
• pp.30-37
• /
• 1988

A mathematical model was developed and programmed for computer simulation of a prototype hot water boiler system with rice hull furnace to predict the temperature distributions in the rice hull furnace and water tank, mass flow rate of hot water and thermal efficiency of the system under various operation and design conditions. The effects of feed rate of rice hull, thickness of the furnace wall, the type of heat exchanger, diameter of the water circulation pipe, etc, on the performance of the system can be evaluated with this model. The validity and simulation results of this model will be published in the next paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1360-1364
• /
• 2004

This paper propose an extended model for role-permission assignment based on locations called "Enhanced Role-Based Access Control (ERBAC03)". The proposed model is built upon the well-known RBAC model. Assigning permissions to role is considered too complex activity to accomplish directly. Instead we advocate breaking down this process into a number of steps. The concept of jobs and tasks is specifically introduced to facilitate role-permission assignment into a series of smaller steps. This model is suitable for any large organization that has many branches. Each branch consists of many users who work in difference roles. An administration tool has been developed to assist administrators with the administration of separation of duty requirements. It demonstrates how the specification of static requirements can be done based on "conflicting entities" paradigm. Static separation of duty requirements must be enforced in the administration environment. Finally, we illustrate how the ERBAC03 prototype is used to administer the separation of duty requirements.

• 전자공학회논문지B
• /
• 제31B권7호
• /
• pp.159-169
• /
• 1994

In this paper, we develop a prototype of ITS(Intelligent Tutoring Systems) system: UNIX TUTOR. It is designed for the purpose of teaching the UNIX beginners the principal concepts of UNIX and the shell commands using the communication between the student and the system. UNIX TUTOR engages the student in a two-way conversation that is mixed-initiative dialogue and attempts to teach the student UNIX via the Socratic method of guided discovery and the Coaching method interchangeably. And the student model is based on both the overlay model and the buggy model together. Thus TUTOR aims at teaching the students effectively whose levels of learning are different using various explanations which are determined by the student model. Because the knowledge representation for UNIX-TUTOR is based on the frame structure and the production rules it is easy to represent the complicated constructs. UNIX TUTOR is implemented on the SPARC station using X/Motif and C for cp command among 10 ones which were selected.

• 한국BIM학회 논문집
• /
• 제6권1호
• /
• pp.1-8
• /
• 2016

This paper provides a method for generating flight path of Unmanned Aerial Vehicle (UAV) that is intended to be used in visual inspection of dome-type nuclear containment building. The method basically employs 3-D model to extract accurate location coordinates. Two basic route patterns that provide guide lines in defining moving locations were defined for each side wall and dome section of the containment. The route patterns support sequential capturing of images as well. In addition, several simple equations and an algorithm for calculation of the moving location on the route were developed on the basis of 3-D geometric characteristics of the containment building. A prototype computer program has been implemented to validate the proposed method, and a case study shows the method can visualize covering area in 3-D model as well.