• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.753-758
• /
• 2009

Recently the high-end CMOS image sensors are developed, conforming to the SMIA CCP2 specification, which is a high-speed low-power serial interface based on LVDS technology. But this kind of technology trend makes the existing equipments are no longer useful, although their capability is still good enough to handle the recent image sensors if there was no interfacing problem. In this paper, we propose and realize a data protocol conversion system that translates the SMIA CCP2 serial signals into the existing 10-bit parallel signals. The proposed system is composed of a de-serializer and a FPCA chip, and thus can be constructed on a small PCB which enables easy integration between the existing equipments and the new high-end image sensors. Besides, the maximum transfer rate by the SMIA specification is also achieved on the implemented system. So it is expected that the implemented system can be used as a general-purpose protocol converter in a variety of sensor-related application fields.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.628-634
• /
• 2003

In existing internet, e-mail protocols including POP3 and IMAP4, provide e-mail services for exchanging messages with texts, hypertext and images as well. For the e-mail services in wireless mobile network, mobile e-mail service Providers have to install a mobile exclusive e-mail server or have to convert e-mail to mobile exclusive e-mail with wireless application format in case of POP3 protocol. In the e-mail service of IMAP4 case known as web-mail, It is difficult to view e-mail directly from server without IMAP4 mobile client because e-mail is stored in mail server side with remote file server. In either case, it also has the problems of viewing the e-mail of hypertext and image information at mobile, This Paper Provides e-mail extraction engine with image and hypertext conversion facilities that can be applied in wireless mobile internet and it is optimized In mobile communication environments such as a small display, small size of memory with web-mail protocol based on IMAP4 as well as POP3 mail protocol.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1673-1678
• /
• 2019

There are various networks and communication methods are used in industrial communication. Enterprises need to convert communications between industrial devices and networks for production line expansion, factory upgrades, network segmentation, and SI. This requires designers manufactured by many manufacturers to provide communication equipment for data or protocol conversion in order to connect and transmit various other mechanical devices to the network. This paper designed industrial communication gateway that can support the transformation of industrial communication protocol using multi-layered communication module. Industrial communication gateways have a structure that connects individual communication modules using RS485 communication to multiple layers. Each communication module consisted of analog and digital data card, LAN, and CAN-enabled card. The main board processor used Atmega micro-processor, and the RS485 slot was placed to have a multi-layer communication module structure. These additive layer type communication modules support analog and digital I/O functions and LAN and CAN for wide use in industrial communication control and monitoring.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.573-580
• /
• 2002

Reusing IPs requires interface protocol related tasks such as writing test benches and designing interface protocol conversion circuits, e.g. wrappers for IPs. The results of those tasks usually include IPC(interface protocol component)s for the corresponding IPs, similar to bus protocol components of the bus functional models. This paper proposes a methodology for the interface circuit design using synthesizable In that can be re-used. IPC recognizes or executes transactions over the given interface ports. So we present a transaction-oriented interface protocol description language, and a method to convert the description into an IPC in synthesizable VHDL code. With experiments, we show that the interface design using IPC does not cause significant area overhead compared with the interface design without IPC. The proposed IPC-based approach can be employed to reduce the interface design time since the designers can reuse IPCs without understanding the detailed interface protocols.

• Progress in Medical Physics
• /
• v.18 no.4
• /
• pp.194-201
• /
• 2007

Although Gamma Knife irradiates much more radiation in a single session than conventional radiotherapy, there were only a few studies to measure absolute dose of a Gamma Knife. Especially, there is no report of application of International Atomic Energy Agency (IAEA) TRS-398 which requires to use a water phantom in radiation measurement to Gamma Knife. In this article, the authors reported results of the experiments to measure the absorbed dose to water of a Gamma Knife Model C using the IAEA TRS-398 protocol. The absorbed dose to water of a Gamma Knife model C was measured using a water phantom under conditions as close as possible to the IAEA TRS-398 protocol. The obtained results were compared with values measured using the plastic phantom provided by the Gamma Knife manufacturer. Two Capintec PR-05P mini-chambers and a PTW UNIDOS electrometer were used in measurements. The absorbed dose to water of a Gamma Knife model C inside the water phantom was 1.38% larger than that of the plastic phantom. The current protocol provided by the manufacturer has an intrinsic error stems from the fact that a plastic phantom is used instead of a water phantom. In conclusion, it is not possible to fully apply IAEA TRS-398 to measurement of absorbed dose of a Gamma Knife. Instead, it can be a practical choice to build a new protocol for Gamma Knife or to provide a conversion factor from a water phantom to the plastic phantom. The conversion factor can be obtained in one or two standard laboratories.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.147-150
• /
• 2007

This paper presents an advanced RFID reader system implementing multi-protocols and multi-standards at 900MHz. In accordance with the strict regulations specified by ISO 18000-6 B-Type and EPC Global Gen 2, we have designed corresponding systemic factors which meet the domestic radio frequency utilizing bands of 910-914MHz. In addition, we develop numerous crucial factors of system compatibility options including SSB (Single-Side Band) and DSB (Double-Side Band) specifications, also OOK (On-Off Keying), ASK (Amplitude Shift Keying) and PR-ASK (Phase Reversed-Amplitude Shift Keying) modulation formula. Remarkable technical features of system in this paper can be the direct conversion routines using I/Q Modulation/Demodulation respectively, and Full-Duplex formulation operating at identical frequency bands.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.397-400
• /
• 2006

Recent trend on high speed packet processing for providing multiple internet services is to use network processor instead of being implemented by legacy ASIC or FPGA. Most frequently used network processor interface is the SPI4.2. This paper address the data-rate conversion interface device between SPI4.2 and SPI3/CSIX, implemented using XILINX XC2VP40 FPGA. Furthermore, we address the methodology and necessity of flow control occurred due to the data rate difference between 10Gbps and 3.2 Gbps.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.12
• /
• pp.5981-5997
• /
• 2017

Advanced Television Systems Committee (ATSC) produced ATSC 2.0 standard, which has been used for a HD/SD digital broadcasting service with MPEG-2 Transport Stream (TS) as a delivery protocol. Recently, users might want to consume multimedia services without being constrained by transport network. However, MPEG-2 TS is not suitable protocol for IP network. Thus, ATSC has enacted ATSC 3.0 standard, which is designed for a hybrid service through a conversion of both broadcasting and broadband channels. The ATSC 3.0 specifies delivery protocols as MPEG Media Transport (MMT) for a broadcasting environment and Dynamic Adaptive Streaming over HTTP (DASH) for a broadband. However, it seems difficult to combine broadcast and broadband for hybrid broadcasting, and it is difficult to synchronize media data between MMT and DASH. This paper suggests various new service scenarios to be brought up by a hybrid broadcasting, ATSC 3.0, and also proposes a stable mechanism for switching contents between different delivery protocols such as MMT and DASH.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.635-638
• /
• 2002

In this paper, the connection device of RS232C and TCP/IP implementation using ARM processor and LINUX is proposed. Data interaction flash memory the multiple serial ports are transferred to ARM processor and the data are processed and formed into data packet for transfer via internet protocol. Packet flash memory Internet is decoded to extract the serial port data. The serial ports supports RS232C asynchronous protocol communication and control program is developed in GNU-C and installed in the on-board memory for packet conversion and control. The research result can be applied to terminal server, printer server and multiple serial ports equipments.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.553-555
• /
• 2004

본 연구는 정지궤도 위성 환경에서 지상망과 위성망 간의 특성 차이로 인해 필수적으로 행해져야 하는 프로토콜의 변환에 대한 연구이다. 정지궤도 위성 환경은 높은 에러율과 큰 지연시간을 가진다. 또한 기존 지상망과 위성망 간의 높은 전송 지연 차이에 따른 버퍼 혼잡으로 인한 데이터의 손실을 피할 수 없다. 따라서 본 연구에서는 상이한 링크가 혼재된 데이터 네트워크에서 각 링크를 특성에 따라 분할하여 구간별로 독립적인 데이터 전송 및 재전송을 수행하도록 하며 전체적인 데이터 전송 처리량을 향상시키는 Spoofing 기술 및 기존 TCP 프로토콜을 대신하여 위성 프로토콜인 STP(Satellite Transport Protocol)을 적용한 PEP (Performance Enhancing Proxy) 분할 연결을 연구하였다.