• Journal of Radiation Protection and Research
• /
• v.31 no.1
• /
• pp.1-7
• /
• 2006

The measured mean activities of $^{226}Ra,\;^{232}Th,\;^{40}K\;and\;^{137}Cs$ in the soil of Bahawalpur, Bahawalnagar and Rahimyar Khan Bistricts were 32.9, 53.6, 647.4 and 1.8 Bq $kg^{-1}$. The average absorbed dose rate calculated from these activities was 74.3 nGy $h^{-1}$ and the mean annual effective dose rate was found to be 0.46 mSv $y^{-1}$. Absorbed doses to different body organs were derived from annual effective doses using tissue weighting factors. Radiation induced fatal cancer risks were assessed by using ICRP 60 Model. Estimations incurred 184deaths per year due to cancer.

• Journal of Radiation Protection and Research
• /
• v.30 no.4
• /
• pp.167-174
• /
• 2005

The concentrations of natural and artificial radionuclides in soil and gamma ray dose rate in air at 233 locations in Korea have been determined. The national mean concentrations of $^{232}Th,\;^{226}Ra,\;^{40}K,\;^{137}Cs\;and\;^{90}Sr$ in soil were $60{\pm}31,\;33{\pm}14,\;673{\pm}238,\;35{\pm}9.3\;and\;5.0{\pm}3.4\;Bq\;kg^{-1}$, respectively. The mean gamma-ray dose rate at 1 m above the ground was $7918\;nGy\;h^{-1}$. $^{137}Cs$ concentration had highly significant correlation with organic matter content and cation exchange capacity. $^{90}Sr$ concentration had slightly coherent with pH. The results have been compared with other global radioactivity and radiation measurements.

• Structural Engineering and Mechanics
• /
• v.32 no.2
• /
• pp.269-282
• /
• 2009

Responding to the threat of terrorist attacks around the world, numerous studies have been conducted to search for new methods of vulnerability assessment and protective technologies for critical infrastructure under extreme bomb blasts or high velocity impacts. In this paper, a two-dimensional behavioral rate dependent lattice model (RDLM) capable of analyzing reinforced concrete members subjected to blast and impact loading is presented. The model inherently takes into account several major influencing factors: the progressive cracking of concrete in tension, the inelastic response in compression, the yielding of reinforcing steel, and strain rate sensitivity of both concrete and steel. A computer code using the explicit algorithm was developed based on the proposed lattice model. The explicit code along with the proposed numerical model was validated using experimental test results from the Woomera blast trial.

• Safety and Health at Work
• /
• v.7 no.3
• /
• pp.208-212
• /
• 2016

Background: Outdoor workers are at risk of high ultraviolet radiation exposure, and may have difficulty using sun protection. The objectives were to determine the prevalence of sun protection behaviors in a sample of outdoor construction workers, and to assess which factors predict better sun protection practices. Methods: Participants were recruited via construction unions. Workers answered a questionnaire on demographics, skin cancer risk, sun protection behaviors, and job. Sun protection behavior scores (from questions on sunscreen use, sleeved shirt, hat, shade seeking, sunglasses) were calculated by converting Likert-scale answers to scores from 0 to 4, and taking the mean (separately for work and leisure). Determinants of sun protection behavior scores were examined for work and leisure using generalized linear models. Results: Seventy-seven workers had complete questionnaire data (participation 98%). Sun protection behaviors used most often were hats (79% often/always) and sleeved shirts (82% often/always); least prevalent were shade-seeking (8% often/always) and sunscreen (29% often/always). For both work and leisure scores, the strongest predictor was skin type, with fairer-skinned individuals having higher sun protection behavior scores. Workers had higher scores at work than on weekends. Workplaces that required hats and sleeved shirts for safety purposes had higher protection behavior scores. Conclusion: This high-participation rate cohort helps characterize sun protection behaviors among outdoor workers. Workers practiced better sun protection at work than on weekends, suggesting that workplace policies supportive of sun protection could be useful for skin cancer prevention in the construction industry.

• The Korean Journal of Malacology
• /
• v.28 no.4
• /
• pp.349-359
• /
• 2012

The purpose of this study is to compare the clearance rate (CR) and intake rate (IR) of juvenile purple clam, Saxidomus purpuratus when feeding on different unialgal diet of red tide dinoflagellates (RTDs), and to know what is the most important cell characteristic of RTDs to cause the differences in feeding parameters. Experiments were performed to measure the CR and IR of juvenile S. purpuratus as a function of algal concentration when food was either the standard food, Isochrysis galbana or one of 9 RTDs. Patterns of CR with increasing algal concentration were similar among different RTDs. The highest $C_{max}$ was observed when S. purpuratus was feeding on A. affine, while the lowest on C. polykrikoides. The patterns of IR with increasing algal concentration were also similar among different RTDs. However, there were great differences in the maximum value of IR ($I_{max}$) among different RTDs. The highest $I_{max}$ was observed when S. purpuratus was feeding on A. carterae, while the lowest on G. catenatum. Some RTDs similar in size showed different $C_{max}$. Other RTDs different in size showed similar $I_{max}$. Life form of each RTD affected significantly the $I_{max}$, which was higher for single-celled RTDs than chain-forming RTDs. There were no significant differences in feeding parameters between toxic and nontoxic RTDs. Moreover, a toxic dinoflagellate, A. carterae recorded the highest $I_{max}$ among RTDs. The most important characteristic of RTD as a factor affecting the feeding rate of S. purpuratus was life form, not size or toxicity of RTD species.

• Journal of Applied Reliability
• /
• v.15 no.4
• /
• pp.270-275
• /
• 2015

Purpose : UHMWPE (Ultra-high-molecular-weight-polyethylene) is one of the most widely used material in knife protection clothes because of high strength, elasticity, and light weight. The purpose of this study is to develop the accelerated life test method and predict the lifetime for the knife protection fabric composed by UHMWPE. Methods : In this study, degradation characteristics of UHMWPE fibers and knife protection fabric for cut resistance were evaluated under the hydrolysis and photo-degradation conditions. It was found out that the degradation rate of retained tensile strength was more significant in the photo-degradation than hydrolysis. Therefore, the failure time was determined as the time that the retained tensile strength in photo-degradation is less than 50%. Considering an acceleration factor for irradiance and exposure time, the lifetime was predicted from the calculated failure time. Results : As a result of the accelerated life test, the $B_{10}$ lifetime of knife protection fabric composed by UHMWPE fibers is estimated as 2.8 years for a 90% statistical confidence level. Conclusion: Since the lifetime is predicted by the view-point of radiant exposure in this study, there is a possibility that the estimated lifetime may differ from the actual lifetime. However, it is considered as an useful methodology to estimate the long-term lifetime of knife protection fabrics.

• Corrosion Science and Technology
• /
• v.16 no.1
• /
• pp.38-47
• /
• 2017

Due to various types of Zn coatings for many decades for various applications, it is imperative to study and compare their corrosion resistance properties of some of these. Here, we introduce a systematic methodology for evaluation and validation of corrosion protection properties of metallic coatings. According to this methodology, samples are were exposed in an advanced cyclic corrosion test chamber according to ISO 14993, and removed at the end of each withdrawal for respective corrosion and electrochemical characterization to evaluate both barrier and galvanic protection properties. Corrosion protection properties of coatings were evaluated by visual examination according to ISO 10289, mass loss and subsequent corrosion rate measurements, electrochemical properties, and advanced electrochemical scanning techniques. In this study, corrosion protection properties of a commercial zinc rich coating (ZRC) on AISI 1020 mild steel substrates were evaluated and benchmarked against hot dip galvanized (HDG). Results were correlated, and corrosion protection capabilities of the two coatings were compared. The zinc rich coating performed better than hot dip galvanized coating in terms of overall corrosion protection properties, according to the exposure and experimental conditions used in this study. It proved to be a suitable candidate to replace hot dip galvanized coatings for desired applications.

• Journal of Communications and Networks
• /
• v.9 no.2
• /
• pp.198-209
• /
• 2007

This paper provides a thorough study on shared segment protection (SSP) for mesh communication networks in the complete routing information scenario, where the integer linear program (ILP) in [1] is extended such that the following two constraints are well addressed: (a) The restoration time constraint for each connection request, and (b) the switching/merging capacity constraint at each node. A novel approach, called SSP algorithm, is developed to reduce the extremely high computation complexity in solving the ILP formulation. Basically, our approach is to derive a good approximation on the parameters in the ILP by referring to the result of solving the corresponding shared path protection (SPP) problem. Thus, the design space can be significantly reduced by eliminating some edges in the graphs. We will show in the simulation that with our approach, the optimality can be achieved in most of the cases. To verify the proposed formulation and investigate the performance impairment in terms of average cost and success rate by the additional two constraints, extensive simulation work has been conducted on three network topologies, in which SPP and shared link protection (SLP) are implemented for comparison. We will demonstrate that the proposed SSP algorithm can effectively and efficiently solve the survivable routing problem with constraints on restoration time and switching/merging capability of each node. The comparison among the three protection types further verifies that SSP can yield significant advantages over SPP and SLP without taking much computation time.

• Journal of KIISE
• /
• v.42 no.12
• /
• pp.1486-1494
• /
• 2015

While Linux-based mobile devices such as smartphones are increasingly used, they often exhibit poor response time. One of the factors that influence the user-perceived interactivity is the high page fault rate of interactive tasks. Pages owned by interactive tasks can be removed from the main memory due to the memory contention between interactive and background tasks. Since this increases the page fault rate of the interactive tasks, their executions tend to suffer from increased delays. This paper proposes a framework-assisted selective page protection mechanism for improving interactivity of Linux-based mobile devices. The framework-assisted selective page protection enables the run-time system to identify interactive tasks at the framework level and to deliver their IDs to the kernel. As a result, the kernel can maintain the pages owned by the identified interactive tasks and avoid the occurrences of page faults. The experimental results demonstrate the selective page protection technique reduces response time up to 11% by reducing the page fault rate by 37%.

• The Research Journal of the Costume Culture
• /
• v.17 no.2
• /
• pp.216-224
• /
• 2009

This study was accomplished to examine the dyeing property and functionality of both cotton and silk fabrics dyed with clove extract. The purpose of this study was to investigate the effects of dyeing property, antibiosis, and sun protection effectiveness for a clove. The study method used in this study was the experimental research to extract dyestuffs from a clove, to treat dyestuffs with a mordant, and then to measure dyeing colorfastness, antibiosis, and sun protection for dyed fabrics. As a result of the test for dyeing colorfastness, in the case of colorfastness to laundry, the degree of discoloration showed grade $1\sim4$ and the degree of pollution showed grade $4\sim5$. Colorfastness to perspiration for both cotton and silk fabrics dyed showed grade $1\sim2$ to $4\sim5$. Colorfastness to sunlight showed grade 2 to $4\sim5$. Colorfastness to rubbing showed grade $3\sim4$ to $4\sim5$. In the colorfastness to dry cleaning, the degree of discoloration showed grade $3\sim4$ and the degree of pollution showed grade $4\sim5$. As a result of the antibiosis test, for the Staphylococcus aureus, both cotton and silk showed the bacteria reduction rate of 99.9% even after five times laundry, and for the Escherichia coli, cotton fabrics showed the bacteria reduction rate of 99.9% only after one time laundry, but silk fabrics showed the bacteria reduction rate of 99.9% even after five times laundry. As a result of the test for sun protection effectiveness, dyed silk fabrics showed the result more excellent than dyed cotton fabrics.