• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.744-753
• /
• 2018

The Stockholm Convention, which was adopted in Sweden in 2001 to protect human health and the environment, includes regulations for Persistent Organic Pollutant Rotors such as toxic and bioaccumulatives. Currently, there are 28 types of materials. This prohibits and limits the production, use, and manufacture of products. Korea is a member of the Convention, and it is necessary to prepare management and treatment plans to address the POP trends. Thus, we experimentally investigate whether the environmentally stable incineration is achieved when the sample is thermally treated using the Lab-scale (1 kg/hr). The target samples is pesticides in liquid phase and solid phase. In this study, organic chlorinated pesticides and their thermal characteristics were analyzed. We calculated the theoretical air volume based on the element analysis results. Because the interior of the reactor is small, more than 10 times of the air ratio was injected. The retention time was set to at least 4 seconds using a margin. The incineration temperature was $850^{\circ}C$ and $1100^{\circ}C$. Thus, we experimentally investigated whether the environmentally stable incineration was achieved when the sample was thermally treated using the Lab-scale (1 kg/hr). We analyzed five types of exhaust gas; the 02 concentration was high, but the CO amount decreased. Complete combustion is difficult because of the small size of the furnace due to the nature of Lab-scale. The organic chlorine-containing pesticide had an average decomposition rate of 99.9935%. Considering the decomposition rates of organic chlorine-containing pesticide in this study, the incineration treatment at over 2 ton/hour, which is typical for a conventional incinerator, is possible. Considering the occurrence of dioxins and unintentional persistent organic pollutants, it can operate at more than $1,100^{\circ}C$.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.3 s.32
• /
• pp.1-7
• /
• 2004

Tin plating on component finishes may grow whiskers under certain conditions, which may cause failures in electronics equipment. To protect the environment, 'lead-free' among component finishes is being promoted worldwide. This paper presents the evaluation results of whiskers on two kinds of lead-free plating materials at the plating temperature and under the reliability test. The rising plating temperature caused increasing the size of plating grain and shorting the growth of whisker. The whisker was grown under the temperature cycling the bent type in matt Sn plating and striated type in malt Sn-Bi. The whisker growth in Sn-Bi plating was shorter than that in Sn plating. In FeNi42 leadframe, the $7.0{\~}10.0{\mu}m$ diameter and the $25.0{\~}45.0{\mu}m$ long whisker was grown under 300 cycles. In the 300 cycles of Cu leadframe, only the nodule(nuclear state) grew on the surface, and in the 600 cycles, a $3.0{\~}4.0{\mu}m$ short whisker grew. After 600 cycles, the ${\~}0.34{\mu}m$ thin $Ni_3Sn_4$ formed on the Sn-plated FeNi42. However, we observed the amount of $0.76{\~}1.14{\mu}m$ thick $Cu_6Sn_5$ and ${\~}0.27{\mu}m$ thin $Cu_3Sn$ intermetallics were observed between the Sn and Cu interfaces. Therefore, the main growth factor of a whisker is the intermetallic compound in the Cu leadframe, and the coefficient of thermal expansion mismatch in FeNi42.

• Journal of Environmental Science International
• /
• v.20 no.7
• /
• pp.799-809
• /
• 2011

Objectives: This study is aimed at identifying the influential factors on the pulmonary function of ordinary residents in the surrounding areas of Yeosu Industrial Complex. Methods: The PFT (Pulmonary Function Test) was conducted on the target residents numbering 989 people (male 361, female 628). The exposed group (813 people) resided within the radius of 5km from Yeosu Industrial Complex and the control group (176 people) resided in the radius of more than 15 km from May 2007 to November 2007. The survey also took into account other factors including personal characteristics, life habits, respiratory diseases and allergic symptoms, medical histories, and the living environments of the residents in order to further identify influential factors on pulmonary function. Result: When comparing the PFT values of the exposure groups to the control group of the same city, values of the exposure groups were meaningfully lower with an %$FEV_1$ of 107.05% and %FVC of 100.28%. Conversely, the control group reported an %$FEV_1$ and %FVC of 107.26% and 102.85% respectively, indicating that ambient air pollutants reduce lung function. The odds ratio of asthma diagnosis history increased when a subjects residence was close to a heavily trafficked road, traffic amount was huge, a bed was used, and the family had less than four members. However the results were not statistically meaningful. The odds ratios of abnormal pulmonary function were statistically higher among those with asthma(OR=4.29, CI=1.75-10.56), wheezing (OR=2.59, CI=1.24-5.41), and nasal congestion (OR=2.87, CI=1.36-6.08) (p<0.01). The factors affecting $FEV_1$ were symptoms including asthma, passive smoking and allergic eye disease ($R^2$=0.049, p<0.001). For the FVC symptoms including asthma ($R^2$=0.014, p<0.001) were measured. The analysis showed that FVC decreased with increases in $O_3$ and CO(p<0.01). Furthermore, $FEV_1$ decreased with increases in $O_3$(p<0.01). Conclusions: These results will provide preliminary data for establishing responsive measures to protect the health of residents in industrial complexes from air pollution, and to develop lasting environmental health policies.

• Tunnel and Underground Space
• /
• v.11 no.1
• /
• pp.42-58
• /
• 2001

In order to protect the environment from waste disposal activities, the prediction of the flux and flow paths of the contaminants from underground facilities should be assessed as accurately as possible. Especially, the prediction of the pathways and travel times of the nuclides from high level radioactive wastes in a deep repository to biosphere is one of the primary tasks for assessing the ultimate safety and performance of the repository. Since the contaminants are mainly transported with groundwater along the discontinuities developed within rock mass, the characteristics of groundwater flow through discontinuities is important for the prediction of contaminant fates as well as safety assessment of a repository. In this study, the actual fracture network could be effectively generated based on in situ data by separating geometric parameter and hydraulic parameter. The calculated anisotropic hydraulic conductivity was applied to a 3D porous medium model to calculate the path flow and travel time of the large studied area with the consideration of the complex topology in the area. Using the model, the pathways and travel times for groundwater were analyzed. From this study, it was concluded that the suggested techniques and procedures for predicting the pathways and travel times of groundwater from underground facilities to biosphere is acceptable and those can be applied to the safety assessment of a repository for radioactive wastes.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.4
• /
• pp.517-527
• /
• 2023

Objectives: We examine cases of chemical poisoning that occurred in the cleaning of metal parts and the regulations on halogenated solvents in other countries and propose regulations necessary to prevent chemical poisoning from halogenated solvents. Methods: We collected cases of chemical poisoning through the website of the Korea Occupational Safety and Health Agency. A review of the literature was conducted focusing on regulations related to halogenated solvents in the United States and the European Union, particularly for cleaning metal parts. Among the Material Safety Data Sheets submitted to the government, MSDS containing eleven substances were extracted to confirm the composition and product use. We investigated cleaning methods for metal parts used in South Korea. For the hazard classification, the European Chemicals Agency or Japan's NITE's website was used. Results: In the case of poisoning, the cleaning methods involving trichloromethane were dipping and dry, which was not found in the literature. It was confirmed that many halogenated solvents and dimethyl carbonate were used for metal cleaning in South Korea. In vapor degreasing using TCE in the USA, even if the facility is strictly managed, such as by installing cooling coils in open cleaning facilities, the risk of exposure to TCE is considered to be not only carcinogenic but also a concern for acute and chronic effects. In comparison, exposure through Korean work methods such as dipping and drying operations is inevitably much higher. Conclusions: The transition to water-based cleaning with low-hazard chemicals should be a priority in the cleaning process. In the case of metal parts that require precise cleaning, if the use of a halogenated solvent is inevitable, a closed degreasing facility should be used to minimize exposure. The current regulations in the Occupational Safety and Health Act, the Chemical Substances Control Act, and the Air Environment Conservation Act do not require cleaning facilities to minimize emissions. To protect the health of workers using halogenated solvents to clean metal parts, regulations that require a fundamental reduction in exposure will be necessary.

• Korean Security Journal
• /
• no.57
• /
• pp.9-26
• /
• 2018

In order to reflect the Changes in this government's policy of making Temporary Position employees into the Public sector permanent, special security guards from Private Security firms in the National Critical Facilities protection Position are moving forward transformation to Permanent Position. Especially, the organization of the protection personnel of the National Government Buildings designated as the National Critical Facilities is comprised of various types of security personnels, protective officer, special security guards from Private Security firms, Private police guards, police officers and these types of security personnels protect for the Government Buildings. Recently, The Government Security planning division is discussing various types of transformation, Special Security guards are employed directly by the Government in order to convert them into Permanent position, Special Security guards are employed directly through a establishment of Public Security corporation, protective officers are hired by the Government, Self-guards are hired directly by the Government, Private police guards are employed directly by the Government. In order to reflect the Changes the Government policy of making Temporary position employees into the Permanent, the Special Security Guards from Private Security Firms in the National Critical Facility's protection environment, protective personnels operation characteristic under various circumstances. Especially, in the process of making Special Security Guards to Permanent position, it is necessary to take precedence over the various opinions of Special Security Guards and stakeholder.

• Atmosphere
• /
• v.25 no.4
• /
• pp.639-657
• /
• 2015

There is an increasing need to improve the air quality over South Korea to protect public health from local and remote anthropogenic pollutant emissions that are in an increasing trend. Here, we evaluate the performance of the WRF-Chem (Weather Research and Forecasting-Chemistry) model in simulating near-surface air quality of major Korean cities, and investigate the impacts of time-varying chemical initial and lateral boundary conditions (IC/BCs) on the air quality simulation using a chemical downscaling technique. The model domain was configured over the East Asian region and anthropogenic MICS-Asia 2010 emissions and biogenic MEGAN-2 emissions were applied with RACM gaseous chemistry and MADE/SORGAM aerosol mechanism. Two simulations were conducted for a 30-days period on April 2010 with chemical IC/BCs from the WRF-Chem default chemical species profiles ('WRF experiment') and the MOZART-4 (Model for OZone And Related chemical Tracers version 4) ('WRF_MOZART experiment'), respectively. The WRF_MOZART experiment has showed a better performance to predict near-surface CO, $NO_2$, $SO_2$, and $O_3$ mixing ratios at 7 major Korean cities than the WRF experiment, showing lower mean bias error (MBE) and higher index of agreement (IOA). The quantitative impacts of the chemical IC/BCs have depended on atmospheric residence time of the pollutants as well as the relative difference of chemical mixing ratios between the WRF and WRF_MOZART experiments at the lateral boundaries. Specifically, the WRF_MOZART experiment has reduced MBE in CO and O3 mixing ratios by 60~80 ppb and 5~10 ppb over South Korea than those in the WRF-Chem default simulation, while it has a marginal impact on $NO_2$ and $SO_2$ mixing ratios. Without using MOZART-4 chemical IC, the WRF simulation has required approximately 6-days chemical spin-up time for the East Asian model domain. Overall, the results indicate that realistic chemical IC/BCs are prerequisite in the WRF-Chem simulation to improve a forecast skill of local air quality over South Korea, even in case the model domain is sufficiently large to represent anthropogenic emissions from China, Japan, and South Korea.

• Journal of the Korean Home Economics Association
• /
• v.32 no.5
• /
• pp.165-182
• /
• 1994

Korea's clothing industry which has been country's leading export industry and basic strategical industry is now faced with many difficulties both domestically and internationally. Domestically it is faced with continuing shortage of manpower in both production line and management high labour cost causing increase in price putting more weight on behavior of consumers resulting in change of industrial environment and continuing structural problems of industry itself. Internationally it is faced with strengthening of import regulations and protectionism of developed countries and rapid emergence of underdeveloped countries as leading exporting nations. In reality export plays the most essential role in our economy and is especially sensitive to the external environmental factors. Already economic bloc phonomenon can be seen everywhere and is continuing to accelerate in place such as E. U in Europ, North & South America as NAFTA, and South East Asian contries which recent tendency of economic unity effort is present. These countries of such economic blocs are imposing heavy custom duties reinforcing provision of country origin and acting out strict inspection regulations in order to protect the interest of their own industry. Therefore it is vital to manufacture excellent quality goods For these reasons study in this area has brought attention in Korea as well as worldwide in the recent years. Apparel industry which requires professional technology and ability is the most competitive international business. In order to challenge the international market the high level of intelligence is most required to produce high quality goods. The purpose of this study is to analyze the relationship between functions and roles of marketing and to approach problems in more efficient manner. Apparel industry is composed of various programs such as design pattern making merchandising and textile science. To succeed in the business is to give the highest satisfaction to the targeted market. Hence this study will example the factors that determine the Cost Quality and Performance of apparel products. The study will involve following steps; firstly establish relationship between the quality concept and productivity of apparel products Secondly inquire in to marketing strategy laying stress on apparel production related factors focusing on merchandising marketing production and operations Thirdly prospect 21st century apparel industry focusing on garment production and trade and also other countries structural improvement Fourthly establish the new dimension of competitive factors by grasping the actual circumstance of Korea's apparel industry in the international market. The research method will include; First reality approach method by analysing the present state of industry Second literal analysis such as marketing comparisons between leading apparel exporting countries.

• Journal of Radiation Protection and Research
• /
• v.29 no.3
• /
• pp.187-196
• /
• 2004

The health effects resulting from severe accidents of typical 1,000MWe KSNP(Korea Standard Nuclear Plant) PWR and typical 600MWe CANDU(CANada Deuterium Uranium) plants were estimated and compared. The population distribution of the site extending to 80km for both site were considered. The releaese fraction for various source term categories(STC) and core inventories were used in the estimation of the health effects risks by using the MACCS2(MELCOR Accident Consequence Code System2) code. Individuals are assumed to evacuate beyond 16km from the site. The health effects considered in this comparative study are early and cancer fatality risk, and the results are presented as CCDF(Complementary Cumulative Distribution Function) curves considering the occurrence probability of each STC's. According to the results, the early and cancer fatality risks of PHWR plants we lower than those of PWR plants. This is attributed the fact that the amount of radioactive mateials that released to the atmosphere resulting from the postulated severe accidents of PHWR plants are smaller than that of PWR plants. And, the dominating initiating event of STC that shows maximum early and cancer fatality risk is SGTR(Steam Generator Tube Rupture) for both plants. Therefore, the appropriated actions must be taken to reduce the occurrence probability and the amounts of radioactive materials released to the environment in order to protect the public for both PWR and PHWR plants.

• Journal of Society of Preventive Korean Medicine
• /
• v.23 no.2
• /
• pp.117-127
• /
• 2019

Objectives : Korean medicine practice is not specifically described in medical law, and then has always been a quarrel. So far The criteria for judgment in Korean Medicine Doctor's Medical Devices Using should clinically prove it only by Korean medicine theory and academic Traditionally descending from old ancestors. Comprehensively review of Korean Medicine Doctor's Medical Devices Using and Duty of Care, and then present a new understandings to determine future Korean Medicine Practice. Method : An existing court cases of Korean Medicine Doctor's Medical Devices Using and Duty of Care were reviewed. After reviewing various papers published for several years, various opinions were reviewed and suggested. Results : The range of Korean Medicine Doctor's Medical Devices Using has changed since the 1951 National Medical Law stipulated Korean medicine as medical professionals. The issue of the recent ruling that distinguishes medical practice from Korean medicine practice were condensed into what emphasis to interpret amongst 1) The basic principles of learning, 2) Curriculum and professionalism, 3) Risks. The Constitutional Court's ruling was important in order of 'Risk', 'curriculum and expertise', and 'basic principles of learning.' A duty of Care means an obligation to pay attention to something. A duty of Care does not mean a "highest level," but requires a "best care" and does "best under given conditions." Even in the duty of Care, Because Korean medicine has a purpose to protect and promote the health of the people, Some standards of western medicine have to be adapted to the current general medical technology. Korean Medicine doctors can recognize the duty of care in the "some basic range" of knowledge belonging to western medicine. Conclusions : The interpretation of Korean Medicine practice are currently in compatible the argument that should clearly divide Korean medicine from Western medicine, and that should be changed in light of the changing medical environment. Therefore If Korean medicine's standard is applied to the extent to which Korean Medicine doctors are educated, it is necessary to define a new definition to actively interpret Korean Medical practice. The academic basis of Korean medicine and the level of Korean medicine practice based on the books that are traditionally available, and then current textbooks of Korean Medicine College, Korean Medicine Clinical Care Guidelines, and classification of Korean standard medical practices should be standardized. Increasingly, Korean Medicine practice should be interpreted according to reality, focusing on protecting and promoting the health of the people rather than academic differences.