• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.85-88
• /
• 2006

This study describes the optimum mix proportion of the high strength and self-compacting concrete placed in main structures of LNG above tank. This concrete requires high strength level about $60{\sim}80MPa$, low hydration heat, balance between workability and consistency without vibrating in the actual work. For this purpose, low heat portland cement and fly ash are selected and design factors including water-binder ratio, replacement ratio of fly ash are tested. As experimental results, low heat portland cement shows lower the confined water ratio than another cement type and the optimum replacement ratio of fly ash in order to improve properties of the binder-paste shows 10% by cement weight considering test results of the confined water ratio$({\beta}p)$. Also, flowability of the high strength and self-compacting concrete by using fly ash about $10{\sim}20%$ is improved. The replacement ratio of fly ash 10% and water-binder ratio $25{\sim}27%$ are suitable to the design strength 80MPa and cost, In case of the design strength 60MPa, the replacement ratio of fly ash and water-binder ratio show 20% and $25{\sim}30%$ separately. Based on the results of this study, the optimum mix proportions of the high strength and self-compacting concrete will be applied to the construction of LNG above tank as a new type.

• 가정과삶의질연구
• /
• 제8권2호
• /
• pp.15-30
• /
• 1990

The purpose of this study are 1) to offer the basic data for consumer education by examining and analyzing housewife's Life Style. 2) to make the housewife lead for Life Style better and more resonable. Questionnaires were sent to 623 housewives in Pusan who have elementary , middle and high school students. Frequence, Factor analysis, Cluster analysis, One-way Anova, X 2-test were used to take statistics. The results were as follows. 1) Housewife's Life Style in independent house area were ' the economical seeking pattern' which takes up th high proportions, next 'the practical reserved seeking pattern' ,'the tradition and reservational fashion seeking pattern', and 'the negative neverlessness pattern' On the other hand, the Life-Style in apartment area were' the rapid purpose seeking pattern', next ' the economical seeking pattern', the fashion and pleasure seeking pattern' and 'the tradition and reservational fashion seeking pattern'. 2) By surveying the relationships the housewife's Life Style and the demographics, first, there was a difference in housewife's Life Style of the independent house area by the level of education, monthly mean income and husbands occupation. 3) Finally, as I studied th characterization of which they possessed thing, it usually appeared the characteristic possession by types.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.345-346
• /
• 2010

수중불분리 콘크리트의 품질은 혼화제의 성능 및 배합비와 같은 변수들에 영향을 받으며, 이들 중 혼화제의 성능은 수중불분리 콘크리트의 품질에 많은 영향을 주고 있다. 따라서, 본 연구에서는 수중불분리성 혼화제를 사용한 콘크리트의 슬럼프 플로우, 응결시간, 압축강도 및 수중분리도를 측정하여 수중불분리성 혼화제의 성능을 평가하였다. 그 결과, 수중불분리성 혼화제를 사용한 콘크리트는 플레인 콘크리트보다 유동성, 압축강도 및 수중불분리도와 같은 콘크리트의 품질이 개선되는 것으로 나타났다.

• 한국환경과학회지
• /
• 제15권5호
• /
• pp.431-438
• /
• 2006

The strength, water permeability, and photo-degradation efficiency of NOx of porous concrete with a new concept were studied in this paper. The porous concrete was comprised of coarse aggregate of maximum size 40 mm, cement, silica fume, water and air-entraining(AE) water reducing agent. The strength of porous concrete was strongly related to its matrix proportion and compaction energy. An experimental test was carried out to study the parameters of cement proportions and silica fume content for pavement applications of porous concrete which were paving a footpath, a bikeway, a parking lot, and a driveway. The regressed equations of relation-ships between compressive strength and flexural strength, and coefficient permeability and void ratios were indicated as y=7.69x+71.74 and $y=0.42e^{0.28x}$. A method of making an air purification-functioning road, which was spraying a mixture of a photocatalyst, cement, and water onto the surface of the road, was suggested.

• 보건의료산업학회지
• /
• 제11권4호
• /
• pp.145-155
• /
• 2017

Objectives : To investigate the factors affecting bone mineral density in across stratified postmenopausal ages. Methods : Data from 1,698 subjects who completed the 2010-2011 National Health and Nutrition Survey were analyzed using SPSS Statistics 21.0 The $x^2$ test and one way (ANOVA) were used to verify the relationship between general characteristics and health behaviors and the prevalence of osteoporosis. Logistic regression analysis was used to verify the factors Influencing bone mineral density. Results : The bone mineral density distribution was the highest among those with osteopenia, with proportions of 21.8% in healthy subjects, 58.1% in osteopenia, and 20.0% in those with osteoporosis. The distribution of osteoporosis by age group was 5.2% among subjects in their 50s, 15.4% among those in their 60s, and 42.4% among those in their 70s. In multivariate logistic regression analysis, the prevalence of osteoporosis according to ages was significantly correlated with age, educational level, body mass index(BMI), and parity 4 of more than 1-2 babies. Conclusions : Although age is an uncontrollable factor in the prevention of osteoporosis, educational level and BMI are correctable factors to maintain bone mineral density. There is a need to maintain healthy BMI and expand osteoporosis prevention education.

• 한국건축시공학회지
• /
• 제4권3호
• /
• pp.93-100
• /
• 2004

In recent years, it has widely been studied on the light-weight composites for the purpose of the large space and thermal insulation of building structures. The purpose of this study is to evaluate the properties of light-weight composites made by binders as cement, resin and polymer cement slurry. The concrete composites are prepared with various conditions such as polymer-cement ratio, void-filling ratio, type of resin, filler content and light-weight aggregate content, tested for thermal conductivity. From the test results, the thermal conductivity of concrete composites with the binder of cement tends to decrease with increasing polymer-cement ratio, and to increase with increasing void-filling ratio. The thermal conductivity of concrete composites with the binder of resin are markedly affected by the light-weight aggregate content, type of resin and filler content. The composites made by polymer-modified concrete and polymer cement slurry have a good thermal insulation property. From the this study, we can recommend the proper mix proportions for thermal insulation Panel or concrete. Expecially. the thermal conductivity of concrete composites made by polyurethane resin is almost the same as that of the conventional expanded polystyrene resin.

• Computers and Concrete
• /
• 제20권1호
• /
• pp.77-84
• /
• 2017

Shirasu, a pyroclastic flow deposit, showed considerable performance as aluminosilicate source in geopolymer, based on past research. However, the polymerization reactivity was somewhat lower compared to the traditional fly ash based geopolymer even though the long-term strength was fairly good. The present study concentrates on the development of higher initial strength performance of Shirasu based geopolymer by utilizing ground granulated blast furnace slag as an admixture. Mortars with various mix proportions were adopted to study the effect of parametric changes on strength development along with the addition of slag in different percentages. A combination of sodium hydroxide and sodium silicate was used as alkaline activators considering parameters like molar ratios of alkali to geopolymer water and silica to alkali molar ratio. The mortars were cured at elevated temperatures under different curing conditions to analyze the effect on strength development. Compressive strength test, mercury intrusion porosimetry and X-ray powder diffraction were carried out to assess the strength performance and microstructure of slag-Shirasu based geopolymer. Based on the experimental study, it was observed that the initial and long-term strength development of Slag-Shirasu geopolymer were improved by the addition of slag.

• Geomechanics and Engineering
• /
• 제14권3호
• /
• pp.301-306
• /
• 2018

Stabilization of clayey soil has been studied from past to present by mixing different additives to the soil to increase its strength and durability. In recent years, there has been an increasing interest in stabilization of soils with natural pozzolans. Despite this, very few studies have investigated the impact of pozzolanic additives under freeze-thaw cycling. This paper presents the results of an experimental research study on the durability behavior of clayey soils treated with lime and perlite. For this purpose, soil was stabilized with 6% lime content by weight of dry soil (optimum lime ratio of the the soil), perlite was mixed with it in 0%, 5%, 10%, 20%, 25% and 30% proportions. Test specimens were compacted in the laboratory and cured for 7, 28 and 84 days, after which they were tested for unconfined compression tests. In addition to this, they were subjected to 12 closed system freeze-thaw cycles after curing for 28 days. The results show that the addition of perlite as a pozzolanic additive to lime stabilized soil improves the strength and durability. Unconfined compressive strength increases with increased perlite content. The findings indicate that using natural pozzolan which is cheaper than lime, has positive effect in strength and durability of soils and can result cost reduction of stabilization.

• 한국의류산업학회지
• /
• 제4권6호
• /
• pp.534-543
• /
• 2002

The purpose of this study was to identify the body proportions of girls in middle and high school who have been a major sales target of clothing manufacturers and thus to provide the basic information on the proportion of human body, which is essential for manufacturer to produce clothing and for individual consumers to select right apparels to wear and purchase. The subjects were 133 girls in middle school and 141 girls in high school. As measuring instruments, the Martin's anthropometer, tapelines, and belts for marking waistline were used. In order to analyze the data, t-test and factor analysis were used. The measurement of vertical distance between vertex and measuring points, showed a significant difference between the high school group and middle school group in every item. In the comparison of eight head proportion between the two groups, middle school students had 7.2 head proportion while girls in high school had 6.9 head proportion in detail. The factor analysis of major divided body parts of the two groups indicated that waist-hip and hip-crotch, constituting lower trunk together, vertex-apex nasi, and apex nasi-back neck point, constituting head together, back neck point-spina scapula and spina scapula-waist, constituting posterior of upper body together, and mentum-bust point and bust point-waist, constituting anterior of upper body together, were in inverse proportion.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.760-765
• /
• 2013

Eco-friendly material applied to building would be one of the materials which is must developed for global environmental conservation and reduction of carbon dioxide. For development of eco-friendly material, a cellulose sound-absorbing material has been developed with waste paper through adjustment of various mix proportions. The developed cellulose sound-absorbing material has been tested for its acoustic properties such as acoustic absorptivity and dynamic elastic modulus. The absorptivity was evaluated by developing six samples and using impedance tube and reverberation chamber. As a result of the evaluation, 0.64(NRC) was secured in absorptivity and $4.7MN/m^3$ was indicated in dynamic elastic modulus. Also, for practical use of developed sound-absorbing material as inner heartwood in drywall, comparison test of sound reduction index was performed with existing glass wool sound-absorbing material and constructed drywall of gybsum board. The results have shown 55dB(Rw) of sound reduction index in glass-wool wall and 46dB(Rw) in cellulose.