• 한국환경과학회지
• /
• 제28권4호
• /
• pp.423-433
• /
• 2019

This study was carried out to identify the problems of the underground watersheds on Jeju Island, and to establish the hydraulic groundwater basin to be used as basis for the analysis of the groundwater model. In order to evaluate the adequacy of the groundwater basin on Jeju Island, a correlation analysis between elevation and groundwater level was conducted using data from 125 observation wells. The analysis, conducted with an elevation step of 100 m, exhibited values of R2 in the range 0.1653-0.8011. No clear correlation was observed between elevation and groundwater level. In particular, the eastern and western areas showed an inverse proportionality between elevation and groundwater level. The Kriging technique was used to analyze the underground water level data and to define the equipotential lines for all areas of Jeju Island. Eight groundwater watersheds were delineated by considering the direction of groundwater flow, the positions of the observation wells, and the long and short axes of the watersheds.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1535-1541
• /
• 1994

The void content of carbon fiber reinforced composite laminates was determined by the ultrasonic nondestructive technique. The ultrasonic immersion, through-transmission method developed stresses the utilization of spectral analysis and frequency dependence of the attenuation due to porosity. The measured attenuation shows approximately linear behavior over the frequency range investigated. The linear relationship between the void content and the attenuation slop (d $\alpha$/df) is found to hold, but the constant of proportionality is quite different for samples with different pore morphology. The void volume fraction determined by the attenuation slope agreed very well with that obtained by the acid digestion analysis.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.369-376
• /
• 2002

The stochastic analysis of semi-infinite domain is presented using the weighted integral method, which is improved to include the higher order terms in expanding the displacement vector. To improve the weighted integral method, the Lagrangian remainder is taken into account in the expansion of the status variable with respect to the mean value of the random variables. In the resulting formulae only the 'proportionality coefficients' are introduced in the resulting equation, therefore no additional computation time and memory requirement is needed. The equations are applied in analyzing the semi-infinite domain. The results obtained by the improved weighted integral method are reasonable and are in good agreement with those of the Monte Carlo simulation. To model the semi-infinite domain, the Bettess's infinite element is adopted, where the theoretical decomposition of the strain-displacement matrix to calculate the deviatoric stiffness of the semi-infinite domains is introduced. The calculated value of mean and the covariance of the displacement are revealed to be larger than those given by the finite domain assumptions which is thought to be rational and should be considered in the design of structures on semi-infinite domains.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.96-100
• /
• 2003

In this paper, a DLC method is proposed for linear feedback systems to improve the tracking performance when the task of the system is repetitive. DLC can generate the desired control input directly from the previously learned control inputs corresponding to other output trajectories. It is assumed that all the desired output functions considered in this paper have some relations called proportionality and it is shown by mathematical analysis that DLC can be utilized to generate additional control efforts for the perfect tracking. To show the validity and tracking performance of the proposed method, some simulations are performed for the tracking control of a linear system with a PI controller.

• 대한수학교육학회지:학교수학
• /
• 제4권3호
• /
• pp.483-494
• /
• 2002

A Situation-problem, one of the problems in school mathematics, plays a role as the starting point of teaming mathematics. It leads to construct knowledge which is a tool for solving the problems. Whether the problem is a situation-problem or not, it depends upon how to use that problem. Since posing situation-problems is accompanied by prior analysis and planning for teaching in the class, it is a difficult task. This paper focuses on the characteristics of situation-problems and on how their characteristics are realized in the process of classroom instruction. For this purpose, it analyzes the context of classroom instruction to which the 'puzzle problem' model suggested by Brousseau is applied. The model is considered as a typical situation-problem, which aims at proportionality and linearity. In addition, this paper suggests various sources of information that are useful in posing the situation-problems related to the ratio concepts.

• 전기의세계
• /
• 제13권3호
• /
• pp.13-20
• /
• 1964

The measurements of X-ray and Gamma-ray Dose Rate have been successfully made by measuring the short circuit current of the Silicon P-N Junction Diode being irradiated. The short circuit current flows when a silicon P-N Junction Diode is irradiated by X-ray of Gammaray radiations due to photovoltaic effect. A brief analysis is given in order to verify the proportionality of a short circuit current to the Dose Rate. Using this method, measurements of X-ray Dose Rate were carried out in the range of 0.05-1600 r/m successfully. The calibration was made by comparing with Victoreen condenser r-meter. Some advantages in this Dose Rate meter over a condenser r-meter were found. One can measure a continous variation of X-ray Dose Rate with this rate meter at the control console of X-ray device.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권2호
• /
• pp.76-80
• /
• 2005

In this paper, a Direct Learning Control (DLC) method is proposed for linear feedback systems to improve the tracking performance when the task of the control system is repetitive. DLC can generate the desired control input directly from the previously learned control inputs corresponding to other output trajectories. It is assumed that all the desired output functions given to the system have some relations called proportionality and it is shown by mathematical analysis that DLC can be utilized to genera additional control efforts for the perfect tracking. To show the validity and tracking performance of the proposed method, some simulations are performed for the tracking control of a linear system with a PI controller.

• 대한수학교육학회지:학교수학
• /
• 제5권4호
• /
• pp.421-440
• /
• 2003

본 논문에서는 비 개념이 역사적으로 어떤 의미를 가지고 있으며, 비에 대한 생각이 어떻게 변화되어 왔는지 살펴본다. 또한 비에 대한 여러 가지 수학적 의미를 찾아보고, 비 개념의 본질이 어떠해야 하는지를 알아본다. 그리고 비례적 추론의 직관적 근원과 발달 과정을 찾아보고 비 개념의 심리적 측면을 분석해 봄으로써 비 개념 지도와 관련하여 교육적 시사점을 탐구한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.34-39
• /
• 1998

In order to compute the forces which are transmitted through rubber bushings with a commercial multibody dynamic analysis (MBDA) program, a rubber bushing model is needed. The rubber bushing model of MBDA programs such as DADS or ADAMS is the Voigt model which is simply a parallel spring-viscous damper system, meaning that the damping force of the Voigt model is proportional to the frequency. However, experiments do not necessarily support this proportionality. Alternatively, the viscoelastic characteristics of rubber bushings can be better represented by the complex stiffness. The purpose of this paper is to develop a viscoelastic rubber bushing model for the MBDA programs. Firstly, a methodology is proposed to calculate the complex stiffness of rubber bushings considering static and dynamic load conditions. Secondly, a viscoelastic rubber bushing model developed which uses standard elements provided by DADS. The proposed methods are applied to the rubber bushings of the lower control arms of a rear suspension of a 1994 Ford Taurus model. Then, the forces computed for the rubber bushing model are analyzed and compared with the Voigt model in time and frequency domains.

• 대한물리의학회지
• /
• 제7권2호
• /
• pp.149-155
• /
• 2012

Purpose : The purpose of this study was to analyze the correlations among bone mineral density(BMD), serum lipid levels, and cognitive function in the elderly with dementia. Methods : We recruited seventy elderly with dementia(men=35, women=35) to participate in the Korean mini mental state examination(K-MMSE). Their T-scores and serum lipid levels were analyzed for correlation analysis. Results : The results of this study showed that there are significant correlations between cognitive function and three factors BMD, low-density lipoprotein cholesterol(LDL-C) level, and total cholesterol(TC) level. The cognitive function scores increased proportionally with BMD but were inversely proportional to LDL-C and TC levels. There were no significant relations among cognitive function, high-density lipoprotein cholesterol(HDL-C) level, and triglyceride(TG) level. Conclusion : These results indicate that there is a direct proportionality between cognitive function and BMD and inverse proportionalities between cognitive function and LDL-C level and between cognitive function and TC level. Therefore, these levels can be indices for preventing and predicting dementia.