• 한국지반환경공학회 논문집
• /
• 제20권10호
• /
• pp.29-38
• /
• 2019

연약지반 안정 및 침하관리에 있어 침하예측기술은 지속적으로 발전되어 공사비 절감과 정확한 토지사용 시기를 확인하는데 활용하고 있으나, 기존 예측방법인 쌍곡선법, Asaoka법, Hoshino법 등은 많은 계측기간이 경과되어야 정확한 침하예측이 가능하여 압밀초기 신속한 예측이 어려운 실정이다. 기존 예측방법이 침하곡선으로부터 산정한 기울기의 비례성 가정을 통해 장래침하량을 추정하는 사유로 판단된다. 본 연구에서는 시계열 분석기술 중 ARIMA 기법을 도입하여 기존예측방법과 비교 분석하였다. ARIMA 기법은 지반조건 구분 없이 예측 가능하였으며, 기존방법과 유사한 결과를 조기에 예측(최종침하) 할 수 있었다.

• 대한건축학회논문집:계획계
• /
• 제34권8호
• /
• pp.59-67
• /
• 2018

In a state where ancient buildings was left a lot in the case of Korea, many parts do not remain the documentation, and there is a Kiwarisho lot in Japan, however, the present methods and tree split does not exist in the Korea. However, it is impossible to make a perfect building without splitting exact member when making a building. Thus will not be revealed simply by presumption that there is a similar way to wood comparatively far in Korea. Without a comparison of building dimensions and Korea calculation dimensions Kiwarisho In the first study about the proportionality of Korea, I do not know until now, other studies of the following documents which house a high approximation ratio and member size of Korea consider reason to have is impossible. View compared with respect to the axis of the building in the early stages of research first. In the case of Japan and Korea to form a tree frames in basic form that form the building, the shaft portion is easy to understand and easy compared in common is at most the shaft portion.

• 한국수학사학회지
• /
• 제37권3호
• /
• pp.59-75
• /
• 2024

This study aims to analyze Joseon mathematical knowledge and its application to real world. The mathematical knowledge refers to measuring the area of plane figures, known as square-shaped land(方田). Its application is land surveys(量田) conducted for taxation purposes. Specifically, this study analyzes the correlation between the related contents in representative mathematical books of the Joseon Dynasty, such as MuksaJipsanbub (17th century), Guiljib (18th century), and SanhakIbmun (18th century), and the shapes and areas of plane figures presented in GwangmuYangan (20th century). The analysis reveals both differences and similarities in the measured area between mathematical books and real world land surveys. While most results of the land survey align with the results obtained from mathematical methods, differences arise due to variations in real measurement of lengths and given conditions in the problems. Additionally, various aspects such as the focus on rectangles in land surveys, the proportionality and relativity of lengths, types of approximation, composed shapes, the purpose of problem solving, and reasoning of unspecified shapes or measures are discussed.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2437-2443
• /
• 2024

This work synthesized four glass samples with a fixed ratio of PbO to Na₂O and a variable ratio of BaO to B₂O₃. The linear attenuation coefficient (LAC) (μ, cm^-1) and additional attenuator parameters were determined experimentally using a semiconductor detector and different gamma sources. The comparison was carried out between the experimental and the XCOM calculated results, with good agreement emerging between the two results. The impacts of the BaO substituting for the B₂O₃ on fabricated PNBB glasses' radiation shielding properties were discussed. By increasing the BaO substitution concentration between 10 and 25 mol.%, the LAC μ values (cm^-1) increased by 76.60 %, 13.81 %, 12.56 %, and 12.52 % for the respective γ-ray energies of 0.059, 0.662, 1.173, and 1.332 MeV. The μ value reduction with raised gamma energy values increased the values of the calculated half-value thickness (Δ_0.5) as a result of the μ and Δ_0.5 values' reverse proportionality. Other shielding parameters such as the lead equivalent thickness (Δ_eq) and radiation protection efficiency were also determined for the present PNBB glass samples.

• 무역상무연구
• /
• 제71권
• /
• pp.195-216
• /
• 2016

In determining the content of the FET standard, the tribunals stated protection of investor's legitimate expectations, due process and denial of justice, transparency, discrimination and arbitrariness, good faith, etc. The most major elements of the FET standard is the protection of the investor's legitimate and reasonable expectations. It is necessary to consider whether it is possible to what the expectations of investors are protected as legitimate and it is formed under any circumstances. If host state frustrate investor's legitimate expectations, it found a breach of the FET. The host state's specific assurance may reinforce investor's expectations, but such explicit statement is not always necessary. The host state must preserve a stable environment for investments. However, It must not be understood as the inalterability of the host state's legal framework. It implies that the host state's subsequent changes should be made consistently and predictably. The host state is entitled to exercise a reasonable regulatory authority to respond to changing circumstances in the public purpose. Therefore, whether the violation FET shall be determined through a balanced against the investor's legitimate expectations and the host state's reasonable regulatory exercise in the public interest. And investor should keep in mind that the principle of proportionality is applied unless host state provides stabilization clause or similar commitments to investor. Also host state should establish the basis of an argument about reasonable regulatory authority for public interest.

• 원예과학기술지
• /
• 제16권1호
• /
• pp.25-26
• /
• 1998

본 연구는 정량펌프를 이용한 정확한 증산량 추정 시스템의 구축 및 측정된 증산량과 환경요인과의 관계를 분석하는 데 있다. 정량펌프에 의한 양액공급 및 증산량 추정 시스템은 매우 안정적인 특성을 나타냈으며, 증산량 추정을 위하여 재배 시스템에 설치한 정량펌프의 공급시간과 투입량과의 관계는 직선관계를 나타냈다. NFT 및 고형배지 시스템에서의 적산일사량과 증산량을 실측한 결과 증산량은 일사량에 직접적인 영향을 받고 있었으며, NFT는 상관계수 0.98. 고형배지는 상관계수 0.92의 높은 상관관계를 나타내었다. 따라서 정량펌프에 의한 증산량 추정은 양액급액 제어에 효율적인 방법이며, 이러한 방법을 사용하여 적산일사량에 의한 관수량 조절 및 비료투입량의 결정에 적용이 가능하다. 따라서, 측정된 적산일사량에 의하여 증산량 추정이 가능하기 때문에, 정량펌프에 의하여 필요 관수량을 정확한 공급할 수 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.231.1-231.1
• /
• 2015

Surface energy, being an important material parameter to control its interactions with the other surfaces plays a key role in bio-related application. Carbon films are found very promising due to their characteristics such as wear and corrosion resistant, high hardness, inert, low resistivity and biocompatibility. The present work deals with the deposition of carbon films using unbalanced facing target magnetron sputtering technique. The discharge characteristics were studied using optical emission spectroscopy and correlated with the film properties. Surface energy was investigated through contact angle measurement. The ID/IG ratio as calculated from Raman spectroscopy data increases with the increase in power density due to the higher number of sp2 clusters embedded in the amorphous matrix. The deposited films were smooth and homogeneous as observed by Atomic force microscopy having RMS roughness in the range of 1.74 to 2.25 nm. It is observed that electrical resistivity and surface energy varies in direct proportionality with operating pressure and has inverse relation with power density. The surface energy results clearly exhibited that these films can have promising applications in cell cultivation.

• Smart Structures and Systems
• /
• 제19권6호
• /
• pp.665-678
• /
• 2017

In this paper the tuned mass-damper-inerter (TMDI) is considered for passive vibration control and energy harvesting in harmonically excited structures. The TMDI couples the classical tuned mass-damper (TMD) with a grounded inerter: a two-terminal linear device resisting the relative acceleration of its terminals by a constant of proportionality termed inertance. In this manner, the TMD is endowed with additional inertia, beyond the one offered by the attached mass, without any substantial increase to the overall weight. Closed-form analytical expressions for optimal TMDI parameters, stiffness and damping, given attached mass and inertance are derived by application of Den Hartog's tuning approach to suppress the response amplitude of force and base-acceleration excited single-degree-of-freedom structures. It is analytically shown that the TMDI is more effective from a same mass/weight TMD to suppress vibrations close to the natural frequency of the uncontrolled structure, while it is more robust to detuning effects. Moreover, it is shown that the mass amplification effect of the inerter achieves significant weight reduction for a target/predefined level of vibration suppression in a performance-based oriented design approach compared to the classical TMD. Lastly, the potential of using the TMDI for energy harvesting is explored by substituting the dissipative damper with an electromagnetic motor and assuming that the inertance can vary through the use of a flywheel-based inerter device. It is analytically shown that by reducing the inertance, treated as a mass/inertia-related design parameter not considered in conventional TMD-based energy harvesters, the available power for electric generation increases for fixed attached mass/weight, electromechanical damping, and stiffness properties.

• 한국압력기기공학회 논문집
• /
• 제16권1호
• /
• pp.100-109
• /
• 2020

Pipelines subjected to ground movement would be easily exposed to large-scale deformation. Since such deformations may cause the pipeline failure, it is important to ensure the safety of pipelines in various operation conditions. However, crack in weld metal have been considered as one of the main causes that can deteriorate the structural integrity of the pipeline. For this reason, the structural integrity of the pipe containing the crack in the weld should be obtained. In order to assess cracked pipe, J-integral and crack-tip opening displacement(CTOD) have been applied widely as the elastic-plastic fracture mechanics parameters representing crack driving force. In this study, engineering solutions to calculate the J-integral and CTOD of pipes with a circumferential outer surface crack in the weld are proposed. For this purpose, 3-dimensional elastic-plastic finite element(FE) analyses have been performed considering the effect of overmatch and width of weld. The shape of the weld was simplified to I-groove, and axial displacement was employed as for loading condition. Based on FE results, the effects of crack size, material properties and width of weldment on J-integral and CTOD were investigated. Additionally, the J-integral and CTOD for I-groove were compared with those for V-groove to examine the effects of the weld shape, and a proportionality coefficient of J-integral and CTOD was calculated from the results of this paper.

• Corrosion Science and Technology
• /
• 제17권3호
• /
• pp.138-145
• /
• 2018

The aim of this work is the attainment of the $TiO_2-nanotube$ photocatalytic-growth condition using anodization, whereby the $NH_4F-H_2O$ weight ratio is appropriately controlled. We fabricated the $TiO_2$ nanotubes using a two-step anodization (first step is 1 hr; second step is 30 hr) under the ambient pressure and the room temperature at 60 V in ethylene-glycol solutions to investigate the effects of the $NH_4F$(0.1,0.3,0.5wt%) and $H_2O$(1-3wt%) on the $TiO_2-nanotube$ geometry and the photocatalytic efficiency. Further, the decomposition efficiency of the methylene blue on the $TiO_2$ nanotubes by the UN radiation depended on the geometrical change of the nanotube geometry, indicating the proportionality of the decomposition efficiency to the surface area that was affected by the $NH_4F$ and $H_2O$ concentrations. As the $NH_4F$ weight was increased, the surface area initially decreased but slightly increased later, and the length consistently increased. As the $H_2O$ weight was increased, the surface area and length initially increased, but later decreased with the 3 wt% $H_2O$.