• Journal of the Korean GEO-environmental Society
• /
• v.20 no.10
• /
• pp.29-38
• /
• 2019

In stability and settlement management of soft ground, the settlement prediction technology has been continuously developed and used to reduce construction cost and confirm the exact land use time. However, the preexistence prediction methods such as hyperbolic method, Asaoka method and Hoshino method are difficult to predict the settlement accurately at the beginning of consolidation because the accurate settlement prediction is possible only after many measurement periods have passed. It is judged as the reason for estimating the future settlement through the proportionality assumption of the slope which the preexistence prediction method computes from the settlement curve. In this study, ARIMA technique is introduced among time series analysis techniques and compared with preexistence prediction methods. ARIMA method was predictable without any distinction of ground conditions, and the results similar to the existing method are predicted early (final settlement).

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.8
• /
• pp.59-67
• /
• 2018

In a state where ancient buildings was left a lot in the case of Korea, many parts do not remain the documentation, and there is a Kiwarisho lot in Japan, however, the present methods and tree split does not exist in the Korea. However, it is impossible to make a perfect building without splitting exact member when making a building. Thus will not be revealed simply by presumption that there is a similar way to wood comparatively far in Korea. Without a comparison of building dimensions and Korea calculation dimensions Kiwarisho In the first study about the proportionality of Korea, I do not know until now, other studies of the following documents which house a high approximation ratio and member size of Korea consider reason to have is impossible. View compared with respect to the axis of the building in the early stages of research first. In the case of Japan and Korea to form a tree frames in basic form that form the building, the shaft portion is easy to understand and easy compared in common is at most the shaft portion.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.71
• /
• pp.195-216
• /
• 2016

In determining the content of the FET standard, the tribunals stated protection of investor's legitimate expectations, due process and denial of justice, transparency, discrimination and arbitrariness, good faith, etc. The most major elements of the FET standard is the protection of the investor's legitimate and reasonable expectations. It is necessary to consider whether it is possible to what the expectations of investors are protected as legitimate and it is formed under any circumstances. If host state frustrate investor's legitimate expectations, it found a breach of the FET. The host state's specific assurance may reinforce investor's expectations, but such explicit statement is not always necessary. The host state must preserve a stable environment for investments. However, It must not be understood as the inalterability of the host state's legal framework. It implies that the host state's subsequent changes should be made consistently and predictably. The host state is entitled to exercise a reasonable regulatory authority to respond to changing circumstances in the public purpose. Therefore, whether the violation FET shall be determined through a balanced against the investor's legitimate expectations and the host state's reasonable regulatory exercise in the public interest. And investor should keep in mind that the principle of proportionality is applied unless host state provides stabilization clause or similar commitments to investor. Also host state should establish the basis of an argument about reasonable regulatory authority for public interest.

• Horticultural Science & Technology
• /
• v.16 no.1
• /
• pp.25-26
• /
• 1998

Nutrient supplying by a metering pump often produces the inaccuracy in the rate of inflow than expected. In this study, we developed the transpiration estimation system using the metering pump to measure the continuous supplying rate as well as to estimate the accurate transpiration rate. The system showed the stable characteristics by eliminating the fluctuations in the head loss of nutrient tank. The direct proportionality between the supplying time and the supplied nutrient solution was obtained. The exact correlation between the integrated solar radiation and the transpiration rate using the system was calculated, and correlation coefficients between the two factors were 0.98 in the NFT system and 0.92 in the aggregate system. This results suggest that the integrated solar radiation was an important factor to directly decide the supplying volume of nutrient solution in soilless culture system. The deveolped system using the metering pump in the study was able to control the supply of the nutrient solution to the crops adjusting to the variation of solar radiation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.231.1-231.1
• /
• 2015

Surface energy, being an important material parameter to control its interactions with the other surfaces plays a key role in bio-related application. Carbon films are found very promising due to their characteristics such as wear and corrosion resistant, high hardness, inert, low resistivity and biocompatibility. The present work deals with the deposition of carbon films using unbalanced facing target magnetron sputtering technique. The discharge characteristics were studied using optical emission spectroscopy and correlated with the film properties. Surface energy was investigated through contact angle measurement. The ID/IG ratio as calculated from Raman spectroscopy data increases with the increase in power density due to the higher number of sp2 clusters embedded in the amorphous matrix. The deposited films were smooth and homogeneous as observed by Atomic force microscopy having RMS roughness in the range of 1.74 to 2.25 nm. It is observed that electrical resistivity and surface energy varies in direct proportionality with operating pressure and has inverse relation with power density. The surface energy results clearly exhibited that these films can have promising applications in cell cultivation.

• Smart Structures and Systems
• /
• v.19 no.6
• /
• pp.665-678
• /
• 2017

In this paper the tuned mass-damper-inerter (TMDI) is considered for passive vibration control and energy harvesting in harmonically excited structures. The TMDI couples the classical tuned mass-damper (TMD) with a grounded inerter: a two-terminal linear device resisting the relative acceleration of its terminals by a constant of proportionality termed inertance. In this manner, the TMD is endowed with additional inertia, beyond the one offered by the attached mass, without any substantial increase to the overall weight. Closed-form analytical expressions for optimal TMDI parameters, stiffness and damping, given attached mass and inertance are derived by application of Den Hartog's tuning approach to suppress the response amplitude of force and base-acceleration excited single-degree-of-freedom structures. It is analytically shown that the TMDI is more effective from a same mass/weight TMD to suppress vibrations close to the natural frequency of the uncontrolled structure, while it is more robust to detuning effects. Moreover, it is shown that the mass amplification effect of the inerter achieves significant weight reduction for a target/predefined level of vibration suppression in a performance-based oriented design approach compared to the classical TMD. Lastly, the potential of using the TMDI for energy harvesting is explored by substituting the dissipative damper with an electromagnetic motor and assuming that the inertance can vary through the use of a flywheel-based inerter device. It is analytically shown that by reducing the inertance, treated as a mass/inertia-related design parameter not considered in conventional TMD-based energy harvesters, the available power for electric generation increases for fixed attached mass/weight, electromechanical damping, and stiffness properties.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.16 no.1
• /
• pp.100-109
• /
• 2020

Pipelines subjected to ground movement would be easily exposed to large-scale deformation. Since such deformations may cause the pipeline failure, it is important to ensure the safety of pipelines in various operation conditions. However, crack in weld metal have been considered as one of the main causes that can deteriorate the structural integrity of the pipeline. For this reason, the structural integrity of the pipe containing the crack in the weld should be obtained. In order to assess cracked pipe, J-integral and crack-tip opening displacement(CTOD) have been applied widely as the elastic-plastic fracture mechanics parameters representing crack driving force. In this study, engineering solutions to calculate the J-integral and CTOD of pipes with a circumferential outer surface crack in the weld are proposed. For this purpose, 3-dimensional elastic-plastic finite element(FE) analyses have been performed considering the effect of overmatch and width of weld. The shape of the weld was simplified to I-groove, and axial displacement was employed as for loading condition. Based on FE results, the effects of crack size, material properties and width of weldment on J-integral and CTOD were investigated. Additionally, the J-integral and CTOD for I-groove were compared with those for V-groove to examine the effects of the weld shape, and a proportionality coefficient of J-integral and CTOD was calculated from the results of this paper.

• Corrosion Science and Technology
• /
• v.17 no.3
• /
• pp.138-145
• /
• 2018

The aim of this work is the attainment of the $TiO_2-nanotube$ photocatalytic-growth condition using anodization, whereby the $NH_4F-H_2O$ weight ratio is appropriately controlled. We fabricated the $TiO_2$ nanotubes using a two-step anodization (first step is 1 hr; second step is 30 hr) under the ambient pressure and the room temperature at 60 V in ethylene-glycol solutions to investigate the effects of the $NH_4F$(0.1,0.3,0.5wt%) and $H_2O$(1-3wt%) on the $TiO_2-nanotube$ geometry and the photocatalytic efficiency. Further, the decomposition efficiency of the methylene blue on the $TiO_2$ nanotubes by the UN radiation depended on the geometrical change of the nanotube geometry, indicating the proportionality of the decomposition efficiency to the surface area that was affected by the $NH_4F$ and $H_2O$ concentrations. As the $NH_4F$ weight was increased, the surface area initially decreased but slightly increased later, and the length consistently increased. As the $H_2O$ weight was increased, the surface area and length initially increased, but later decreased with the 3 wt% $H_2O$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.6
• /
• pp.1395-1404
• /
• 1994

Transverse bed slope in bend is a subject of scientific investigation since it provides the necessary information for channel design and protection of hydraulic structures (bank, bridge, etc), and study of river morphology. In this paper, selected models were examined and compared for the value of prediction of the transverse bed slope in curved alluvial channels(project area), by using field data, and fitting model was proposed. All models that related the local transverse bed slope to mean flow characteristics were alike in the sense that they predicted the local transverse bed slope to be proportional to the ratio between depth and radius of curvature. The difference among the models was related with the factor of proportionality, K. Also, measured transverse bed slope was correlated to mean velocity, maximum depth, and density Froude number in channel bend. In this paper selected models were compared for the prediction of the transverse bed slope using Odgaard's experiment (obtained in Sacramento River bend), so Odgaard89 model was closely related with real transverse bed slope.

• Korean journal of food and cookery science
• /
• v.4 no.1
• /
• pp.17-26
• /
• 1988

The polysaccharide produced by pseudomonas elodea, Gellan gum, was rheologically characterized, compared with agar. Rheological properties were determined from the change in the value of intrinsic viscosity with the pH and salt concentration. At the range of pH 2∼ll and salt 0∼0.16M KC1, the intrinsic viscosity of Gellan gum ranged from 8.8 to 21.2dl/g and agar ranged from 1.97 to 11.46d1/g. In the absence of salt, the intrinsic viscosity of Gellan gum increased as the pH of solution increased up to neutral pH then decreased slightly at alkaline pH, whearas the intrinsic viscosity of agar increased as the pH of solution increased up to pH 9 then decreased slightly. Intrinsic viscosity of Gellan gum and agar decreased with an increase in salt concentration. The chain stiffness parameter for the Gellan gum was 0.033. The overlap parameter of Gellan gum and agar were 0.047g/dl and 0.087g/dl, respectively. Gellan gum and agar were shear rate dependent or pseudoplastic. The yield stress and proportionality constant of Gellan gum increased slightly as the concentration increase, on the other hand, the shear index of Gellan gum showed a maximum at 0.75g/dl and gradually decreased as the concentration increase. The apparent viscosity of Gellan gum and agar decreased as the temperature increase. A lower concentration of the divalent cations calcium and magnesium is required to obtain maximum gel strength than for the monovalent cations sodium and potassium.