• 대한안전경영과학회지
• /
• 제24권4호
• /
• pp.125-134
• /
• 2022

Forest fires in Korea usually start in the fall and occur every year until spring. Most wildfires are human resources that combine topographical characteristics and carelessness, and failure to respond in the initial stage and lack of cleanup are spreading to large-scale wildfires. In order to prevent these wildfires, active cooperation from the public is essential. As can be seen from recent wildfires, the attention of the public is needed above all else because large-scale wildfires in Korea are occurring due to the people's negligence. If a wildfire spreads and becomes large, it causes damage to life and property, and the damage is irreversible. In this study, various methods were used to prevent forest fires and improve initial suppression ability. In order to minimize damage, the model analyzed by the 119 Special Rescue Team in Gangwon, Chungcheong and nearby forest fires was analyzed on the combustion progress and wind direction by time period. The propagation speed by the wind direction was simulated. Until now, most of the wildfires have been extinguished by firefighting, but I hope that the Forest Service will take the lead and maintain coordination with related organizations.

• 한국산학기술학회논문지
• /
• 제15권10호
• /
• pp.5974-5979
• /
• 2014

압입 방식으로서 경량화된 부품이 매우 균질한 정밀도로 생산이 되며 프레스의 기술이 향상되고 있다. 압입 방식으로 조립하였을 시 핀과 구멍사이에는 압축력에 의한 변형력이 발생되고 접촉면이 손상을 입는다. 따라서 본 연구에서는 CATIA 프로그램을 이용하여 3D 모델링하였으며, ANSYS 프로그램을 통하여 압입 접촉된 평면에서 손상평가를 하였다. 해석결과, 핀이 들어갈 때 PCB판에 작용하는 하중은 약 21.3N인 것으로 확인되었으며, PCB판이 Pin에서 빠져나올 때의 하중은 약 19.24N으로 나타났다. 또한 구조 해석결과, Pin 1이 본 연구 모델의 모든 부품들 중에서 가장 최대응력이 많이 발생하므로, 대표적으로 Pin 1의 최대 등가응력이 192.96MPa로 나타났다. 압입 접촉 손상 특성을 규명하고 본 연구결과를 실제의 압입 공정의 설계에 응용함으로서 그 파손을 방지하고 내구성을 평가할 수 있다고 사료된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.546-548
• /
• 2010

This paper proposes a new baseline-free TR-based SHM method in which the time-reversal (TR) property of the guided Lamb waves is utilized. The new TR-based SHM method has two distinct features when compared with the other existing SHM techniques: (1) The measurement- based backward TR process is replaced by the computation-based process (2) In place of the comparison method most commonly used for SHM, the TOF information of the damage signal extracted from the reconstructed signal is utilized for the damage diagnosis. For the damage diagnosis, the imaging method is adopted to efficiently detect damage by representing the damage as an image. The proposed TR-based SHM technique is then validated through the damage diagnosis experiment for an aluminum plate with a damage at different locations.

• 대한토목학회논문집
• /
• 제28권2D호
• /
• pp.243-248
• /
• 2008

아스팔트 포장에서 발생하는 수분손상은 우수 등에 의한 수분 침투로 아스팔트 혼합물 내의 접착력과 점착력이 손상되면서 발생하는 현상으로서, 아스팔트 포장의 주요 파손에 영향을 미치는 원인의 하나로 알려져 있다. 본 연구에서는 아스팔트 포장에서 발생하는 수분손상을 아스팔트 혼합물의 실내 물성 특성으로 규명하고자, 기존의 간접인장시험과 수정 라트만 시험 방법을 이용하여 국내의 일반 및 SBS 개질 아스팔트 혼합물에 대해 반복 수침 및 다양한 온도 영역에서 아스팔트 혼합물의 물성 변화와 수분 저항성 특성을 평가하였다. 이를 통해 아스팔트 혼합물의 물성(회복탄성계수, 간접인장강도, 파괴에너지, 크리프 변형에너지) 변화가 반복적인 수침에 따른 수분손상과는 높은 상관성을 나타내었으며, 수침 횟수별로 다른 감소 경향을 나타내는 결과를 도출하였다. 그리고 재료 종류별로는 반복 수침에 따른 시험 물성값의 손실률은 모든 온도 영역에서 SBS 개질 아스팔트 혼합물이 일반 아스팔트 혼합물에 비해 낮은 경향을 나타내는 것으로 분석되었다. 결론적으로, 현행 아스팔트 혼합물의 수분손상 특성을 평가하는 방법은 단기적인 수침 조건과 단일 시험 물성에 의해 평가됨으로서 변별력 있는 기준으로 사용하는데 한계가 있는 것으로 판단된다. 이에 아스팔트 혼합물의 장기적인 수분손상 특성 및 변별력 있는 재료 물성의 평가를 위해서는 반복적인 수침 조건과 함께 다양한 물성 기준의 적용이 고려되어야 할 것으로 판단된다.

• 무역상무연구
• /
• 제45권
• /
• pp.3-31
• /
• 2010

The passing of property in goods affects contractual rights and duties. It is the point on which depend issues as diverse as the seller's entitlement to sue for the price and the incidence of risk of loss of casualty to the goods. The passing of property may also have an incidental effect on the remedies of the parties, including specific performance. But Incoterms do not deal with how the goods should reach the agreed point of delivery. While Incoterms specifically deal with questions of division of risk of loss of or damage to the goods between seller and buyer, they do not deal with property or transfer of title of the goods. Indeed, it was not even possible to agree on uniform rules on these questions in the CISG. Therefore, the parties to a contract of sale should provide for these matters themselves in the contract of sale and closely observe what the applicable law requires for the transfer of ownership to the goods and other property rights.

• 항공우주시스템공학회지
• /
• 제3권4호
• /
• pp.27-34
• /
• 2009

This paper deals with the lifetime prediction of Aircraft Flaperon Joint made of AISI 4130 steel. Reviews are performed on the published damage models at first. And three different damage models are used for predicting the fatigue life of the structure subjected to variable amplitude fatigue loading. These models require no increase in complexity of use, nor do they require additional material property or mission loading information to achieve the improved accuracy. Finally a comparison among the fatigue results is performed. It is observed that the Miner's rule could predict longer life than other cumulative damage models which take into account loads below the endurance limit.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제42권2호
• /
• pp.46-50
• /
• 2021

When 4-hexylresorcinol (4HR) incorporated silk mat is used for clinical application, sterilization process is essential. In this study, 4HR incorporated silk mat was sterilized with ethylene oxide (EO) gas or autoclave, and then antibacterial property was evaluated. For the examination of micro-structure after the sterilization, scanning electron microscopic (SEM) exam and Fourier Transform Infrared (FT-IR) spectroscopy were also done. There was no gross difference after sterilization in SEM exam and FT-IR spectra. Antibacterial property of 4HR was also maintained after the sterilization. In conclusion, EO gas or autoclave did not damage the antibacterial property of 4HR in the silk mat.

• 한국압력기기공학회 논문집
• /
• 제14권1호
• /
• pp.1-7
• /
• 2018

Materials in nuclear power plants can be embrittled by neutron irradiation. According to existing studies, the effect of the material property by irradiation embrittlement can be approximately simulated by cold working (pre-strain). In this study, finite element damage analysis method using the stress-modified fracture strain model is proposed to predict J-Resistance curves of irradiated SUS316 stainless steel. Experimental data of pre-strained SUS316 stainless steel material are obtained from literature and the damage model is determined by simulating the tensile and fracture toughness tests. In order to consider damage caused by the pre-strain, a pre-strain constant is newly introduced. Experimental J-Resistance curves for various degrees of pre-strain are well predicted.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.249-256
• /
• 1999

This study is intended to propose a systematic procedure for the development of the reliability-based seismic safety and cost-effective Performance criteria for design and upgrading of long span PC bridges. In the paper, a set of cost function models for life cycle cost analysis of bridges is proposed. The total life cycle cost functions consist of initial cost and direct/indirect damage costs considering repair/replacement costs, human losses and property damage costs, road user costs, and indirect regional economic losses. The damage costs are successfully expressed in terms of Park-Ang median global damage indices and damage probabilities. The proposed approach is successfully applied to model bridges in both regions of a moderate seismicity area like Seoul, Korea and a high one like Tokyo, Japan. It may be expected that the proposed approach can be effectively utilized for the development of cost-effective performance criteria for design and upgrading of various types of bridges as well as long span PC bridges.

• Computers and Concrete
• /
• 제2권6호
• /
• pp.481-498
• /
• 2005

A wavelet based approach is proposed for structural damage detection in beams, plate and delamination of composite plates. Wavelet theory is applied here for crack identification of a beam element with a transverse on edge non-propagating open crack. Finite difference method was used for generating a general displacement equation for the cracked beam in the first example. In the second and third example, damage is detected from the deformed shape of a loaded simply supported plate applying the wavelet theory. Delamination in composite plate is identified using wavelet theory in the fourth example. The main concept used is the breaking down of the dynamic signal of a structural response into a series of local basis function called wavelets, so as to detect the special characteristics of the structure by scaling and transformation property of wavelets. In the light of the results obtained, limitations of the proposed method as well as suggestions for future work are presented. Results show great promise of wavelet approach for damage detection and structural health monitoring.