• Applied Science and Convergence Technology
• /
• v.24 no.6
• /
• pp.250-253
• /
• 2015

High contrast grating (HCG) is the structure made up of the sub-wavelength grating of high-index and the surrounding layer of low-index, which reveals high contrast between two materials. Its advantages include high reflectivity over a broad bandwidth, polarization and wavelength selectivity, optical high-Q resonator, and phase modulation. In this work, the HCG structure comprising of indium tin oxide (ITO) and Silicon (Si), for the surrounding layer and the grating layer respectively, was studied. Its theoretical model was established, and transmittance, phase and optical behavior were calculated by rigorous coupled-wave analysis and finite element method. Furthermore, the established structure was fabricated to validate its feasibility. The fabricated structure shows the focusing capability whose length is about $10{\mu}m$, and the feasibility of the structure was demonstrated. It is also meaningful that ITO layer can contribute to the fabrication of the HCG structure, leading to enable the structure to be electrical-driven.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.3
• /
• pp.71-77
• /
• 2009

Using the results of the expected busy periods for the dyadic Min(N, D) and Max(N, D) operating policies in a controllable M/G/1 queueing model, an important relation between them is derived. The derived relation represents the complementary property between two operating policies. This implies that it could be possible to obtained desired system characteristics for one of the two operating policies from the corresponding known system characteristics for the other policy. Then, upper and lower bounds of expected busy periods for both dyadic operating policies are also derived.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.2
• /
• pp.71-78
• /
• 2016

After the 'Guidelines for the preservation of digital heritage' were published by UNESCO, interests in the fabrication of digital cultural heritage have been increasing throughout the world. The present study was intended to fabricate digital cultural heritages for existing cultural properties using the reverse engineering technology and obtain two-dimensional drawings. Jinju Castle Gongbukmun, which is a cultural property, was selected as a study subject and 3D modeling of Jinju Castle Gongbukmun was conducted by implementing 3D scanning and processing the point cloud data. Using the Gongbukmun 3D model (3D-Gongbukmun) made as such, requirements as a digital heritage were reviewed and 2D drawings of Gongbukmun such as front views, ground plans, and side views could be prepared.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.336-343
• /
• 2011

This paper introduces a simple variable gain amplifier (VGA) structure that shows an inherently dB-linear gain control property. Requiring no additional components for dB-linear control, the structure is compact and power efficient. The designed two-stage VGA shows a gain control range of 60dB with the gain error in the range of ${\pm}0.4$ dB. The power consumption including the output buffer is 20.4 mW from 1.2 V supply voltage with bandwidth of 630 MHz. The prototype was fabricated in a 0.13 ${\mu}m$ CMOS process and the VGA core occupies 0.06 $mm^2$.

• Polymer(Korea)
• /
• v.33 no.3
• /
• pp.263-267
• /
• 2009

In order to improve the hydrophilic property on the surface of d-PMMA(deuterated poly-(methyl methacrylate)) film, it was exposed to oxygen plasma, All experimental conditions were same except to plasma exposure time that was varied from 0 to 180 s, The effects according to the exposure time were identified using contact angles, X-ray reflectometer(XRR), neutron reflectometer(NR), and X-ray photoelectron spectroscopy(XPS). By confirming that as the exposure time increases, water contact angle decreases while the composition of oxygen increases, it was confirmed that the composition of oxygen has a huge influence on improving the hydrophilic property. The physical characters as a function of the exposure time were investigated by the XRR. By analyzing complementally the results of the XRR, NR, and XPS, more detailed chemical bonding conditions were studied by obtaining not only composition of the carbon and oxygen but that of the hydrogen.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.346-346
• /
• 2012

We investigated electrical and optical properties and chemical states of amorphous In-Ga-Zn-O (a-IGZO) thin films deposited at different substrate temperatures (from room temperature to $300^{\circ}C$). a-IGZO thin films were fabricated by radio frequency magnetron sputtering using $In_2O_3$ : $Ga_2O_3$ : ZnO = 1 : 1 : 1 target, and their electrical and optical properties and chemical states were investigated by Hall-measurement, UV-visible spectroscopy and x-ray photoelectron spectroscopy (XPS), respectively. The data showed that as substrate temperature increased, carrier concentration increased, but mobility, conductivity, transmittance in the shorter wavelength region (>350 nm), and the Tauc-plot-estimated optical bandgap decreased. XPS data indicated that the intensity of In 3d peak compared to Ga 3d peak increased but the intensity of Zn 3d peak compared to Ga 3d decreased, and that, from the deconvoluted O 1s peak, defects or oxygen vacancies and non-quaternary contents increased as the temperature increased. The relative intensity changes of the In, Zn, and O 1s sub-component are suggested to explain the changes in electrical and optical properties.

• Korean Journal of Human Ecology
• /
• v.9 no.1
• /
• pp.33-45
• /
• 2000

The handle were observed by objective and subjective method as the washing was repeated for 4 kinds(sample A, B, C, D) of materials which have different water vapor transmission, and the change of water vapor transmission each others. The results of factor analyses for 18 polar adjective words on subjective handle test yielded 4 factors, that were 'elastic property', 'surface property', 'thickness and weight property' and 'thermal and rigid property'. The surface properties were deteriorated remarkably as washing was repeated and significant difference were observed. Compared with the primary hand value for each materials, the statistical difference of samples was shown at Koshi and Fukurami measured by the KES-FB system. Koshi decreased for all the materials after repeated washing, and Fukurami had a tendency to increase for all the materials in proportion to repeated washing. Significant difference of total hand value wasn't shown in repeated washing number, but in fabric types.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.428-431
• /
• 2004

This paper proposes a new 3-D display without glasses using $Moir\acute{e}$ system. It is possible to create a new three-dimensional expression that is different from conventional 3-Dimages. In this study we have geometrically analyzed the process by which moire takes on a three-dimensional property and validated the results of this analysis.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.846_846
• /
• 2009

노즐의 용삭은 초고압 가스 차단기의 압력 상승에 중요한 역할을 한다. 기존의 연구는 총 아크 에너지와 용삭량과의 관계에 집중되어 왔으며 아크 에너지 대신 전류의 제곱등을 사용하기도 했다. 본 논문에서는 반복 시험을 통해 노즐 용삭 특성을 구하였으며, 이를 통해 아크의 전류, 전압과 용삭량과의 상관관계를 구하였다. 또한 계단형 노즐을 사용하여 노즐 반지름과 용삭량과의 관계에 대해서도 살펴보았다.

• Bulletin of the Korean Mathematical Society
• /
• v.44 no.4
• /
• pp.807-816
• /
• 2007

For the stochastic differential inclusion on infinite dimensional space of the form $dX_t{\in}\sigma(X_t)dW_t+b(X_t)dt$, where ${\sigma}$, b are set-valued maps, W is an infinite dimensional Hilbert space valued Q-Wiener process, we prove the boundedness and continuity of solutions under the assumption that ${\sigma}$ and b are closed convex set-valued satisfying the Lipschitz property using approximation.