• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2005.11a
• /
• pp.159-162
• /
• 2005

Recently, due to rapid developments of wireless communication and digital TV, modern society needs to process of aquisition, storage and transmission of much information. So the importance of signal processing is increasing and various digital filters are used in the two-dimensional signal such as image. And kinds of these digital filters are IIR(infinite impulse response) filter and FIR(finite impulse response) filter. And FIR filter which has the phase linearity, the easiness of creation and stability is applied to many fields. In design of this FIR filter, flatness property is a important factor in pass-band and stop-band. In this paper, we designed a 2-D Circular FIR filter using the Bernstein polynomial, it is presented flatness property in pass-band and stop-band. And we simulated the designed filter with noisy test image and compared the results with existing methods.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.34-36
• /
• 2002

The objective of this study is to develop the composite insulator for 170kA disconnecting switch. In this paper, we have investigated the test procedure about each component(FRP tube, flange, shed) through technical standard(IEC 61462) and obtained demand characteristics by mechanical & electrical property test.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.2
• /
• pp.125-131
• /
• 2016

According to the increment of urban buildings, the demand of eco-environment space will be also increased. Therefore, the artificial ground green system on a roof will be supplied gradually. In this study, the concept of simplification, unification and prefabrication was widely applied to supply green system. Consequently, the box unit system with a continuous soil layer was developed, and adhesive property, wind resistance and insulation property of this system were evaluated for site application. As a results of adhesive property and wind resistance test, comparing with design wind pressure and wind velocity, this system was safe at the height of 100m building located in urban. In addition, results of temperature measurement for 120 days showed 17% higher insulation property at daytime and 45% higher insulation property at night than normal box unit system owing to continuous soil layer.

• Journal of applied mathematics & informatics
• /
• v.31 no.5_6
• /
• pp.869-876
• /
• 2013

The design of large family size with the optimal cross-correlation property is important in spread spectrum and code division multiple access communication systems. In this paper we present the sequences with the decimation $d=2{\cdot}2^m-1$, calculate the cross-correlation spectrum for $0{\leq}t{\leq}2^n-2$ and count the number of the value $2^m-1$ occurring for $0{\leq}{\tau}2^n-2$. The sequences have the optimal cross-correlation property. The work on this paper can make it easier to count the number of the whole value occurring for $0{\leq}{\tau}2^n-2$.

• Elastomers and Composites
• /
• v.53 no.2
• /
• pp.80-85
• /
• 2018

Chloro isobutylene isoprene rubber (CIIR) and ethylene propylene diene monomer (EPDM) compounded with other formulation chemicals, depending on the polymer blend, were prepared by mechanical mixing. After manufacturing the rubber vulcanizate by compression molding with a hot press, the mechanical and thermal properties including thermal conductivity, rebound resilience of the CIIR/EPDM blends were measured. As the EPDM rubber content increased, hardness and tension set showed a tendency to increase. Pure CIIR exhibited the lowest tensile strength; however, tensile strength increased with loading of EPDM rubber. On the other hand, in CIIR rubber, which is usually a low-rebound elastomer owing to a high damping effect, rebound resilience exhibited an increasing trend as the content of EPDM rubber increased. As the EPDM rubber content increased, thermal stability was improved due to reduction of decomposition rate in the rubber region of the blend vulcanizate.

• International Journal of Automotive Technology
• /
• v.7 no.1
• /
• pp.101-107
• /
• 2006

The force and moment simulation of a steady-state rolling tire taking the effect of tread pattern into account is described using a steady-state transport method with ABAQUS. Tread meshes can not fully consider a tread pattern because detailed tread meshes are not allowed in the steady-state transport method. Therefore, the tread elements are modeled to have orthotropic property instead of isotropic property. The force and moment simulation has been carried out for the cases of both isotropic and orthotropic properties of tread elements. Both cases of simulation results are then compared with the experimental results. It is verified that the orthotropic case is in a better agreement with the experimental result than the isotropic case. Angle effects of tread pattern have been studied by changing the orientation angle of orthotropic property of tread. It is shown that the groove angle in the tread shoulder region has a more effect on force and moment of a tire than that in the tread center region.

• Composites Research
• /
• v.28 no.3
• /
• pp.124-129
• /
• 2015

CNT and GNP have several excellent mechanical properties including, high strength, Young's modulus, thermal conductivity, corrosion resistance, electronic shielding and so on. In this study, CF/CNT, GNP/epoxy composites were manufactured by varying the CNT weight ratio at 2wt% and 3wt%, GNP weight ratio at 0.5wt% and 1 wt%. The composites were manufactured by mechanical method (3-roll-mill). Tensile, impact and wear tests were performed according to ASTM standards D638, D256 and D3181 respectively. The results showed that, CF/GNP0.5 wt%/epoxy composites gave good mechanical property in all composites, e.g., tensile strength, impact and were resistance.

• Journal of Microbiology
• /
• v.34 no.4
• /
• pp.320-326
• /
• 1996

To analyze the effects of host versus plasmid on survival of 2, 4-degrading bacteria in environmental samples, strains Pseudomonas cepacia/pJP4, Alcaligenes JMP228/pJP4, P. cepacia/p712, and Alcaligenes JMP228/p712 were separately inoculated into samples of field soil, paddy soil, lake water, and river water, and then the changes of their populations were measured. The strains used contained a 2, 4-D degradative plasmid, either pJP4 conferring fast-growing property to the host or p712 conferring slow-growing property, and were resistant to antibiotics such that the inoculated strains could be enumerated against the indigenous microbial populations. In sterile environmental samples, these strains were stably maintained at the levels used for inoculation, except in sterile paddy soil where Alcaligenes JMP228 strains died drapidly. In natural soil samples for four strains declined steadily with time, but in naturla water samples their polulations fell rapidly at the early phase and then remained almost constant. When the environmentla samples were treated with 2, 4-D, P. cepacia/pJP4 and P. cepacia/p712 maintained significant numbers, while Alcaligenes JMP228/pJP4 and Alcaligenes JMP228/p712 declined significantly in most of the samples. The results indicated that the survivability of genetically modified microorganisms could vary depending on the environments and that their abundance in the environments under s2, 4-D selection was markedly influenced by the nature of the 2, 4-D degradative plasmid as well as type of the host strain.

• Corrosion Science and Technology
• /
• v.5 no.6
• /
• pp.218-221
• /
• 2006

Influence of microstructure on the corrosion property of Mg-Al-Zn alloy was investigated using potentiodynamic polarization experiments, galvanic coupling experiments, and scanning electron microscopy in sodium chloride solutions. Pitting was the most common form of attack in chloride solution, and filiform corrosion was also occurred in AZ91D-T4 alloy. On the contrary, filiform attack in the bulk matrix was predominant corrosion form in AZ91D-T6 alloy, and the number and size of pit were decreased than those of AZ91D-T4 alloy. Galvanic coupling effect between $Mg_{17}Al_{12}$ and matrix was existed, but the propagation of galvanic corrosion was localized only near the $Mg_{17}Al_{12}$ phase in AZ91D-6T alloy. The corrosion resistance of Mg-Al matrix increased with decreasing Al content in the matrix. And, it could be regarded that Al content in the matrix is decreased by precipitation of $Mg_{17}Al_{12}$ during the aging treatment and it decreases the anodic reaction rate of the matrix and galvanic effect in AZ91D-T6 alloy. It could be considered that the composition and microstructure of surface protective layer would be varied by precipitation of $Mg_{17}Al_{12}$ and subsequent decreasing of Al content in the matrix. And it would contribute the corrosion resistance of AZ91D-T6 aging alloy.

• Communications of the Korean Mathematical Society
• /
• v.38 no.2
• /
• pp.331-340
• /
• 2023

In this paper, the concept of a maximal chain of ideals is introduced. Some properties of such chains are studied. We introduce some other concepts related to a maximal chain of ideals such as the n-maximal ideal, the maximal dimension of a ring S (M. dim(S)), the maximal depth of an ideal K of S (M.d(K)) and maximal height of an ideal K(M.d(K)).