• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.538-543
• /
• 2008

Recently a nano-scale diamond is possible to manufacture forms of powder(below 100 nm) by new processing of explosion or deposition method. Using a sintering of nano-scale diamond is possible to manufacture of grinding tools. We have need of a processing development of coated uniformly inorganic to prevent an abnormal grain growth of nano-crystal and bonding obstacle caused by sintering process. This paper, in order to improve the sintering property of nano-scale diamond, we coated ZnO thin films(thickness: $20{\sim}30\;nm$) in a vacuum by ALD(atomic layer deposition) Economically, in order to deposit ZnO all over the surface of nano-scale diamond powder, we used a new modified fluidized bed processing replaced mechanical vibration effect or fluidized bed reactor which utilized diamond floating owing to pressure of pulse(or purge) processing after inserted diamond powders in quartz tube(L: 20 mm) then closed quartz tube by porosity glass filter. We deposited ZnO thin films by ALD in closed both sides of quartz tube by porosity glass filter by ALD(precursor: DEZn($C_4H_{10}Zn$), reaction gas: $H_2O$) at $10^{\circ}C$(in canister). Processing procedure and injection time of reaction materials set up DEZn pulse-0.1 sec, DEZn purge-20 sec, $H_2O$ pulse-0.1 sec, $H_2O$ purge-40 sec and we put in operation repetitive 100 cycles(1 cycle is 4 steps) We confirmed microstructure of diamond powder and diamond powder doped ZnO thin film by TEM(transmission electron microscope) Through TEM analysis, we confirmed that diamond powder diameter was some $70{\sim}120\;nm$ and shape was tetragonal, hexagonal, etc before ALD. We confirmed that diameter of diamond powders doped ZnO thin film was some $70{\sim}120\;nm$ and uniform ZnO(thickness: $20{\sim}30\;nm$) thin film was successfully deposited on diamond powder surface according to brightness difference between diamond powder and ZnO.

• Food Science and Preservation
• /
• v.10 no.3
• /
• pp.339-346
• /
• 2003

In order to improve some problems such as contamination of undesirable mold, mycotoxin production and excessive drying on the surface of traditional meju, we developed a capsule type-meju(CM) coated with steamed black bean and Aspergillus oryzae - rice koji(0.3％, w/w) mixture to surface of traditional meju and fermented at 25$^{\circ}C$ for 14 days under 80％ relative humidity. Contamination of undesirable mold on the surface of CM was not detected within 2 weeks and some genus Penicillium molds on control meju without koji were found naturally after 12 days of fermentation. The moisture content of meju was showed to be in the range of 34.7 - 29.4％ being 32.7％(w/w) of mean value. Titratable acidities in CMs prepared with black bean(BCM) and soybean(SCM) were much higher than that in control meju, and BCM was similar to SCM. Free sugar content in BCM(123.98 mg％) was 10 times and 2.1 times higher than that in control meju(15.02 mg％) and SCM(59.85 mg％), respectively. Amino type nitrogen content in control meju was 147.00 mg％ and its content in BCM(255.50 mg％) was 1.37 times higher than that in SCM(187.25 mg％). Total organic acid content in BCM(95.98 mg％) and SCM(1l9.98 mg％) were much higher than that in control meju(26.44 mg％), and then lactic and malic acid contents were markedly changed according to capsulation of meju. Lightness value(L) of Hunter color index was much higher in BCM than in SCM. Fatty acid composition of CM was not different as compared to control meju. Total free amino acid content in BCM(1039.70 mg％) was 4.4 times and 2.4 times higher than that in control meju(236.45 mg％) and SCM(556.07 mg％), respectively.

• Food Science and Preservation
• /
• v.24 no.1
• /
• pp.93-99
• /
• 2017

Collagen synthesis is decreased and matrix metalloproteinase-1 (MMP-1) levels are increased in naturally aged human skin, and these alterations cause changes such as skin wrinkling and decreased elasticity. As a part of our ongoing search for bioactive ingredients, MMP-1 inhibitory and type-1 procollagen synthesis inducing activities of aqueous methanolic extract of manufactured gambir product from Uncaria gambir were investigated in in vitro bioassay systems. In addition, total phenolic contents were quantified using a spectrophotometric method. Among tested samples, 40% MeOH eluate from 80% methanolic extract of manufactured U. gambir using open column chromatography packed with Diaion HP-20 resin showed significant MMP-1 inhibitory activities with an $IC_{50}$ value of $15.6{\pm}1.3{\mu}g/mL$. Furthermore, type-1 procollagen synthesis promoting property of 40% MeOH eluate ($IC_{50}$ value; $6.9{\pm}0.7{\mu}g/mL$) from 80% methanolic extract of manufactured gambir was higher than other eluates. Additionally, the present investigation revealed that 40% MeOH eluate of manufactured gambir product contained a high level of total phenolic compounds. The result suggests a distinct relationship between anti-wrinkle activity and total phenolic contents, and manufactured gambir product could be considered a new effective source of natural bioactive ingredients. Systematic investigation of manufactured gambir product will be performed for further development of its biological properties.

• Korean Journal of Plant Resources
• /
• v.24 no.4
• /
• pp.413-418
• /
• 2011

This study was carried out to establish a proper cultivation site and diagnose the drought-tolerance of Aster scaber and Synurus deltoides leaves by using Pressure-volume curves. In order to measure pressure-volume (P-V) curves, Aster scaber and Synurus deltoides were cut off above ground part and the tip of the cutting were placed in water, which was covered with a plastic bag. Samples were kept overnight (about 12 hours) in darkness at room temperature (20~25$^{\circ}C$) to achieve maximal turgor (full saturation). The pressure in the chamber was gradually increased from 0.3MPa to 1.8MPa by nitrogen gas. After measured, leaf samples were dried at 80$^{\circ}C$ for 48 hours and dry weight of each samples were determined. The result of the original bulk osmotic potential at maximum turgor ${\Psi}^{sat}_o$ sat was lower -0.8 MPa in Aster scaber leaves than -0.7 MPa Synurus deltoides leaves. Also the osmotic potential at incipient plasmolysis ${\Psi}^{tlp}_o$ in Aster scaber leave was -0.9 MPa. In contrast, the value of maximum bulk modulus of elasticity $E_{max}$ of Aster scaber leaves were approximately two folds higher than that of Synurus deltoides leaves. The values of the relative water content at incipient plasmolysis $RWC^{tlp}$ are all above 90% showing that the function of osmoregulation is somewhat better, and Vo/DW, Vt/DW, Ns/DW of Synurus deltoides leaves were approximately 1~2 times higher than that of Aster scaber leaves. Thus, responses to water relations of Aster scaber and Synurus deltoides such as ${\Psi}^{sat}_o$, ${\Psi}^{tlp}_o$, $E_{max}$, ${\Psi}_{P,max}$, $RWC^{tl}$ were shown that the Aster scaber leaves was slightly higher drought-tolerance than Synurus deltoides leaves. However, in both of Aster scaber and Synurus deltoides, occurring incipient plasmolysis at the high water content, have a relatively lower drought-tolerance property indicating that growth of these plants are cultivated appropriate in high moisture soil sites.

• Korean Journal of Plant Resources
• /
• v.27 no.1
• /
• pp.1-10
• /
• 2014

Essential oils of various plants have been known for potential biological effects such as antibacterial, antifungal, spasmolytic, antiplasmodial activities and insect-repellent property. Recently, the essential oils have attracted considerable interest in oral disease therapy. This essential oil has been known as being effective on easing sick house syndrome, giving forest aroma therapy effect and acting as repellent against pest. The essential oil of Pinus koraiensi, a native plant from Hongcheon-gun, Gangwon-do, was obtained by hydrodistillation. In light of its medicinal importance, in this study its composition, antibacterial activity and the reducing effect of offensive odor have been analyzed. The composition of essential oil was determined by GC and GC-MS. We have identified 14 compounds, of which 1R-${\alpha}$-pinene (19.38 %), 3-carene (10.21 %), camphene (9.82 %), limonene (9.00 %), bicyclo[2,2,1] heptan-2-ol (8.76 %) and ${\beta}$-phellandrene (7.98 %) were the main components. Essential oils from P. koraiensis, Chamaecyparis obtusa, Abies holophylla and Pinus densiflora were compared in terms of alleviating effect of malodors caused from formaldehyde, ammonia, trimethylamine and methylmercaptan. P. koraiensis essential oil was found to decrease the amounts of ammonia and trimethylamine by 75.17 % and 77.36 %, respectively. Antibacterial activity against Streptococcus mutans and Streptococcus sobrinus, which were known as oral cavity inducer, was investigated using the paper disc agar diffusion method. The inhibition zone was observed against S. mutans (5.97 mm) and S. sobrinus (1.40 mm), respectively. P. koraiensis essential oil shown effective deodorization and inhibitory activity against oral cavity in this study might be potential material in oral sanitary industry.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.3
• /
• pp.309-316
• /
• 2012

This study was performed to investigate the effects of forage cropping system and cattle slurry on productivity of whole crop rice, whole crop barley and Sorghum-Sudangrass hybrid and environmental pollution in paddy land. Forage cropping system used in this study was consisted of double-cropping whole crop barley followed by whole crop rice applied with cattle slurry (DWBRC) and double-cropping whole crop barley followed by Sorghum-Sudangrass hybrid applied with cattle slurry (DSSBC). The field experiments were conducted on the clay loam at Backsanmyun, Kimje, Chunlabukdo province in Korea for three years (May 2006 to Apr. 2009). This study was arranged in completely randomized design with three replicates. The field had been sown with whole crop rice 'Nampyung', Sorghum-Sudangrass hybrid 'Sordan79' and whole crop barley 'Younyang'. The yields of whole crop barley in DWBRC and DSSBC were 7,515 kg/ha and 8,515 kg/ha, respectively. The yields of whole crop barley in DSSBC significantly increased as compared with that of DWBRC (p<0.05). The contents of crude protein, neutral detergent fiber (NDF), acid detergent fiber (ADF), total digestible nutrient (TDN) of whole crop barley in DWBRC were not difference as compared with those of DSSBC. The pH, and contents of total nitrogen and organic matter in soil samples collected at the end of the experiment increased as compared with those at the beginning of the experiment (p<0.05). However, The content of phosphate in DWBRC was no difference as compared with DSSBC. In addition, after the end of experiment, the concentrations of exchangeable cations (Ca, Na, Mg and K) in soil samples collected at the end of the experiment were remarkably higher than those at the beginning of the experiment (p<0.05). The concentrations of $NH_4$-N, $NO_3$-N, $PO_4$-P, Cl, Ca, K, Mg and Na in leaching water were hardly influenced by the cropping system and application of cattle slurry.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.07a
• /
• pp.39-42
• /
• 1999

Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.4
• /
• pp.63-73
• /
• 2009

Recently, the use of lightweight panels in building structures has been increasing. Of the various lightweight panel types, styrofoam sandwich panels are inexpensive and are excellent in terms of their insulation capacity and their constructability. However, sandwich panels that include organic material are quite vulnerable to fire, and thus can numerous casualties in the event of a fire due to the lack of time to vacate and their emission of poisonous gas. On the other hand, lightweight foamed concrete is excellent, both in terms of its insulation ability and its fire resistance, due to its Inner pores. The properties of lightweight concrete is influenced by foaming agent type. Accordingly, this study investigates the insulation properties by foaming agent type, to evaluate the possibility of using light-weight foamed concrete instead of styrene foam. Our research found thatnon-heating zone temperature of lightweight foamed concrete using AP (Aluminum Powder) and FP (animal protein foaming agent) are lower than that of light-weight foamed concrete using AES (alkyl ether lactic acid ester). Lightweight foamed concrete using AES and FP satisfied fire performance requirements of two hours at a foam ratio 50, 100. Lightweight foamed concrete using AP satisfied fire performance requirements of two hours at AP ratio 0.1, 0.15. The insulation properties were better in closed pore foamed concrete by made AP, FP than with open pore foamed concrete made using AES.

• Journal of Korea Game Society
• /
• v.4 no.3
• /
• pp.11-20
• /
• 2004

Virtual reality that we have seen from the movies in 80's and 90's is hawing near based on the rapid progress of science together with a computer technology. Various virtual reality system developments (such as VRML, HMD FishTank, Wall Type, CAVE Type, and so on) and the advancement of those systems make for the embodiment of virtual reality that gives more sense of the real. Virtual reality is so immersive that makes people feel like they are in that environment and enable them to manipulate without experiencing the environment at first hand that is hard to experience in reality. Virtual reality can be applied to the spheres, such as education, high-level programming, remote control, surface exploration of the remote satellite, analysis of exploration data, scientific visualization, and so on. For some connote examples, there are training of a tank and an aeroplane operation, fumiture layout design, surgical operation practice, game, and so on. In these virtual reality systems, the actual operation of the human participant and virtual workspace are connected each other to the hardware that stimulates the five senses adequately to lend the sense of the immersion. There are still long way to go, however, before long it will be possible to have the same feeling in the virtual reality as human being can have by further study and effort. In this thesis, the basic definition, the general idea, and the kind of virtual reality were discussed. Especially, CAVE typed in reality that is highly immersive was analyzed in definition, and then the method of VR programming and modeling in the virtual reality system were suggested by showing the restoration process of Kyongbok Palace (as the content of the original form of the culture) that was made by KISTI(Korea Institute of Science and Technology Information) in 2003 through design process in virtual reality system. Through these processes, utilization of the immersive virtual reality system was discussed and how to take advantage of this CAVE typed virtual reality system at the moment was studied. In closing the problems that had been exposed in the process of the restoration of the cultural property were described and the utilization plan of the virtual reality system was suggested.

• KDI Journal of Economic Policy
• /
• v.34 no.3
• /
• pp.1-29
• /
• 2012

Based on the spatial and land price data of innovation cities and their periphery areas in Korea, this study examines the degree and timing of changes in land price in relation to projects concerning innovation city. The study result confirms that the current system is inconsistent with the principle of restitution of development gain and therefore, this study attempts to seek improvement measures so that the current system can better fit the principle. The analysis reveals that most innovation cities, excluding Sinseo-dong of Daegu and Ujeong-dong of Ulsan, recorded a statistically significant increase in land prices since 2005, compared to those of their neighboring areas. It can be said that the information related to projects concerning innovation city was reflected in the land price since 2005. However, the standard land price pursuant to Article 70 of the Land Compensation Act is the officially assessed land price released on 1st of January 2007, and this official land price was actually applied to the compensation process. Therefore, estimating the compensation amount for land expropriation based on this land price will contradict the principle of restitution of development gain. In other words, despite the fact that development-related information was already reflected in land prices of innovation cities from 2005 to the end of 2006, the compensation process were carried out without institutional arrangements or efforts to exclude such reflection. To solve this problem, this study makes two suggestions. First, it is necessary to cast aside the limitations of the official land price that can be retroactively applied in accordance with Paragraph 5 of Article 70 of the Land Compensation Act, and instead apply the land price which is the most latest but deemed to have no reflection of development gains. Based on this revised standard land price, if the compensation amount is corrected by the average inflation rate and the average rate of increase in land price during the period until the time of the recognized land price, the amount would better satisfy the principle of restitution of development gain. Second, it is necessary to clearly stipulate the standards of development gains being reflected on the land price by including it in the secondary legislation. Under the current system, it is highly likely that appraiser's arbitrary interpretation on development gains is included in the process of calculating the amount of compensation for land expropriation. In this regard, it is necessary to improve the standards on determining whether development gains are reflected based on the results of this academic research and the existing guidelines for appraisal of compensation for land expropriation published by the Korea Association of Property Appraisers.