• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.156-158
• /
• 2008

Hollow fibers have been used in rather different fields of general textile use and in special-purpose products because of their unique structure. Hollow fibers have profitable properties for some applications because of their large surface/volume ratio. In this paper, dyeing properties of nylon hollow fiber were investigated. Nylon regular fiber and hollow fiber were used in the dyeing experiment. The samples were dyed with three kinds of acid dyes. Effects of dyeing temperature, pH of the dye bath, and dye concentration on dyeing properties were examined.

• Textile Coloration and Finishing
• /
• v.19 no.5
• /
• pp.17-23
• /
• 2007

As polyvinyl alcohol(PVA) filament yarn is commercially used in many fields due to its high strength and modulus properties. This research was carried out to study the dyeing behavior of PVA and to find out appropriate dye for better dyeing. As the dyeing behavior of PVA fiber is similar to cellulose due to the same functional group, reactive and vat dyes were selected for the dyeing. Color strength of PVA fibers treated with vat dyes was found to be better than those with reactive dyes, because of the low fixation of reactive dye on fibers. Most of the reactive dye may became hydrolyzed, and flushed away with water in washing. Colorfastness to laundering was shown to be very high for both of the reactive-dyed and vat-dyed PVA fibers.

• Textile Coloration and Finishing
• /
• v.32 no.3
• /
• pp.142-149
• /
• 2020

The purpose of this study was to investigate the dyeing properties of mugwort extract by nano-cellulose(n-cell). When dyeing cotton, rayon(artificial silk, called Ingyeon) and silk with mugwort extract, the difference with and without 2 wt% n-cell which it diluted to 0.6% treatment was compared. It was found that the addition of n-cell changed the values of L^∗, -a^∗(+red ~ -green), and b^∗(+yellow ~ -blue) of all scoured cotton, rayon and silk fabrics, compared to dyeing only mugwort extract. Furthermore, it was confirmed that the ΔE and the K/S value slightly increased in all of the dyed cotton, rayon, and silk fabrics treated with n-cell at the same time as dyeing compared to the untreated ones. Therefore, by treating the fabric with n-cell, a natural cellulose component, at the same time as dyeing, it is expected to maintain stable fastness, which is a disadvantage of dyeing using natural dyes, and contribute to the utilization and commercialization of other natural dyes.

• Textile Coloration and Finishing
• /
• v.21 no.3
• /
• pp.37-42
• /
• 2009

The low melting PET yarn has sheath/core structure: sheath portion consists of low melting point PET and core portion is regular PET. Dyeing properties of fabric made from low melting PET yarn were investigated at different dyeing temperatures. It was found that the exhaustion yield on the low melting PET fabric was higher than on regular PET fabric. The total K/S value of the dyed low melting PET fabric increased as heat setting temperature increased above $150^{\circ}C$ because the sheath portion of the low melting yarn melted. Although fastness to light of the low melting PET fabric was similar to regular PET fabric, fastness to washing was inferior to regular PET fabric by 1 grade.

• The Korean Journal of Community Living Science
• /
• v.15 no.1
• /
• pp.27-33
• /
• 2004

Natural dyeing means coloring with dyes extracted from plants, minerals or animals found in nature. Natural dyeing provides calm and natural colors; it has antibacterial and deodorizing qualities; and the dyeing process is environmentally friendly. This study extracted natural dyes from young fruit by thinning out the superfluous fruits of Naju pear trees, and then examined its dyeing properties, the optimal dyeing conditions, and its color fastness for practical use. The results indicated that dyeing is ideal when it had Cu mordant treatment (5% concentration at 9$0^{\circ}C$, pH 4) for 50 min. The color fastness of natural dyes with Cu mordant treatment was very excellent after rubbing and dry cleaning, and also good after exposure to perspiration, light and washing.

• Textile Coloration and Finishing
• /
• v.16 no.4
• /
• pp.1-9
• /
• 2004

In recent, development of nano fiber has been one of the most active subjects in the world. Nano fiber is defined as a ultra fine yarn with a diameter unit of $10-100\times10^{-9}meter$, which is possible to be produced by an electro-spinning technology. In this study, physical characteristics and dyeing properties of nylon 66 nano fiber were investigated. Nylon 66 nano fiber was dyed with levelling type acid dyes. X-ray diffraction method and DSC analysis were used for the measurement of the degree of crystallization. Analysis of amino end groups was also performed in order to examine a relationship between number of amino groups and its dyeing property as well as water absorption behavior. The maximum exhaustion % of dyes and dyeing rate under various dyeing conditions, such as dyeing temperature and pH in dye bath, along with build-up properties for 2 acid dyes were evaluated. It was found that the degree of crystallization of nano fiber was smaller than that of regular fiber, and amino end groups of nano fiber were less than regular fiber. Half dyeing time of nano fiber was shorter than regular fiber because of the bigger specific surface area. Effect of pH on exhaustion % was small in case of nano fiber. Exhaustion of nano fiber increased with higher concentration of dye.

• Textile Coloration and Finishing
• /
• v.18 no.6 s.91
• /
• pp.10-15
• /
• 2006

In this article, effect of the dyeing and mechanical properties were investigated on the polyester ultramicro fiber(UMF) and knitted fabric varying fiber fineness(0.01d and 0.05d). By a treatment with NaOH solution, sea-ingredient was removed and polyester micro-fiber was revealed. The dyeing, build-up and fastness properties of the fiber and fabrics were observed. We used C.I. Disperse Red 60 and Blue 56 for dyeing property and eight Lumacron dyes for build-up property and colorfastness. At low temperature dyeing($100^{\circ}C$), the dyeing rate of 0.01d-polyester UME increased more than that of 0.05d-polyester UMF with Disperse Red 60 and Blue 56 whereas dyeing rate of 0.05d-polyester UMF were increased more than that of 0.01d-polyester UMF at high temperature($120^{\circ}C$), The colorfastnesses of the 0.05d-fiber knitted fabric such as washing, rubbing and light was higher than those of the 0.01d-fiber knitted fabric.

• Journal of Fashion Business
• /
• v.14 no.4
• /
• pp.174-184
• /
• 2010

This research was carried out to find the dyeing properties of Scutellaria baicalensis Georgi on the rayon and cotton fabrics. The best proper dyeing conditions were examined by changing dye concentrations, dyeing temperature, dyeing time, and dyeing repitition. Also dyeability and surface color changes were evaluated by various mordanting methods and agents. The maximum absorption of Scutellaria baicalensis Georgi were at 275nm and 362nm. The optimum dyeing conditions on the cotton were 80%, $80^{\circ}C$, 40minutes, 4 repitition, and those on the rayon were 80%, $80^{\circ}C$, 60minutes, 5 repitition. The K/S values of rayon and cotton fabrics were higher in pre-mordant than post-mordant. The K/S values on the rayons were lower than no mordant fabric except pre-Fe mordant, these on the cotton fabrics were higher than no mordant fabric except post-Al mordant. The value of ${\Delta}E$ was the highest in Fe mordanted fabrics, and higher on the cotton fabric than rayon. The surface colors of all mordanted fabrics were yellow.

• Fibers and Polymers
• /
• v.7 no.3
• /
• pp.262-269
• /
• 2006

In this paper, the effects of low temperature plasma (LTP) treatment on the dyeing properties of the wool fiber were studied. The wool fibers were treated with oxygen plasma and three types of dye that commonly used for wool dyeing, namely: (i) acid dye, (ii) chrome dye and (iii) reactive dye, were used in the dyeing process. For acid dyeing, the dyeing rate of the LTP-treated wool fiber was greatly increased but the final dyeing exhaustion equilibrium did not show any significant change. For chrome dyeing, the dyeing rate of the LTP-treated wool fiber was also increased but the final dyeing exhaustion equilibrium was only increased to a small extent. In addition, the rate of afterchroming process was similar to the chrome dyeing process. For the reactive dyeing, the dyeing rate of the LTP-treated wool fiber was greatly increased and also the final dyeing exhaustion equilibrium was increased significantly. As a result, it could conclude that the LTP treatment could improve the dyeing behavior of wool fiber in different dyeing systems.

• Textile Coloration and Finishing
• /
• v.32 no.1
• /
• pp.27-37
• /
• 2020

Low temperature dyeing properties of wool with reactive dyes and acid dyes were investigated for the feasibility study of their application to hair dyeing. The low temperature(30℃, 40℃) dyeing achieved light depth of shade in wool dyeing and reactive dyeing exhibited relatively higher color strength and chroma values than acid dyeing. Leveling agent slightly improved the levelness of the wool dyeing and the leveling properties of dyed wool at low temperature were good to excellent, irrespective of the dyes applied. Color loss during the repeated shampooing was in the range of 9.6~22.2% for reactive dyes and -7.4~31.5% for acid dyes and in some cases, the color fastness to shampooing was reasonable level. The overall experimental results showed that the application of low temperature wool reactive dyeing to hair dyeing is sufficiently feasible in terms of dyeability and color fastness to shampooing.