• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.16-24
• /
• 1995

Traditionally dyeing fabric with dyestuff extracted from Indigo was a popular method of obtaining blue color in the world before synthetic dyestuff was developed in the 1890's. As the Korean traditional process of dyeing extracted from Indigo, there are two kinds of dyeing process; The deposite dyeing of muddy Indigo and the leaf dyeing of Indigo plant. In order to study the properties of leaf dyeing of Indigo, the dyeing properties, color difference on cotton and silk fabrics under several dyeing conditions were investigated. In the dyeing of cotton and silk fabrics with leaf dyeing of Indigo, the dyeing affinity of silk was higher than that of cotton, the cotton and silk fabrics were dyed dark yellowish Green and dark Blue, respectively. the dye uptake increased with the increase of dyeing temperature and of the unmber of dyeing times. When cotton and silk fabrics dyed with leaf dyeing of Indigo at 6$0^{\circ}C$ for six number of times, the K/S value of dyed cotton and silk were calculated 1.286, 2.613 respectively.

• The Research Journal of the Costume Culture
• /
• v.24 no.5
• /
• pp.577-587
• /
• 2016

Natural dye extracted from Salicornia bigelovii was applied to silk fabrics by dip dyeing process. The dyeing properties and the functionalities of the silk fabrics were determined. Factors affecting the dyeing properties such as dyestuff concentration, temperature, time and pH were studied. The colorimetric parameters $L^*$, $a^*$, $b^*$, and H, V/C values were measured to select the optimal mordanting conditions. The color-fastnesses of the dyed and mordanted fabrics were estimated for practical use; in addition, the antibacterial property, ultraviolet protection properties were evaluated. The dyeabilities of silk increased depending on the increasing dye concentration, dyeing time, and dyeing temperature. And optimum dyeing results were achieved when dyeing with 300% (o.w.f.) of dye concentration at $90^{\circ}C$ for 100 minutes and at pH 3. The dyed silk fabrics without mordants produced yellow (Y) color and showed yellow (Y) or green yellow (GY) colors depending on the mordants type. The light fastness of dyed and Al mordanted silk fabrics were found to be excellent, and the drycleaning and rubbing fastness were good. The dyed silk fabrics showed no antibacterial property, but Al and Cu mordanted silk fabrics showed 99.9% reduction rate. The ultraviolet protection properties of the dyed silk fabric was improved. And the ultraviolet protection properties of mordanted samples showed very good ultraviolet protection properties.

• Textile Coloration and Finishing
• /
• v.32 no.2
• /
• pp.80-88
• /
• 2020

Supercritical fluid dyeing is a new alternative to the conventional aqueous process because of its environmental benefits. In this study, dyeing properties of Nylon 6 fabrics were investigated depending on dyeing temperature and pressure in supercritical CO₂ fluid dyeing system. In order to select the optimal condition for supercritical fluid dyeing of Nylon 6 fabrics, dyeing temperature and pressure were varied from 100, 110, 120℃, 200, 230, 260bar, respectively. The results of K/S values and levelling properties showed that the optimal dyeing condition for Nylon 6 fabrics was 110℃ and 230bar in the supercritical CO₂ fluid dyeing system. The washing fastness ratings of the dyed Nylon 6 fabrics under supercritical medium were good for both fading and staining except for staining on nylon.

• Fibers and Polymers
• /
• v.6 no.1
• /
• pp.35-41
• /
• 2005

Research and development of nano fiber products is very active over the world. Physical characteristics and dyeing properties of nylon 66 nano fiber were investigated in this study. X-ray diffraction, DSC, analysis of amino end group, and water absorption were performed to get information concerning physical properties of nano fiber. Nylon 66 nano fiber was dyed with high molecular mass acid dyes. Effects of dyeing temperature, pH of dyeing solution, and concentration of acid dyes on dyeing properties such as rate of dyeing and the extent of exhaustion, were examined and compared to those of regu­lar fiber. It was found that nano fiber adsorbed acid dyes at lower temperature, got rapidly dyed, and its extents of exhaustion at specific dyeing temperature were higher than regular fiber. It was also observed that nano fiber could adsorb a large amount of acid dye without a significant loss in the extent of exhaustion. Washing fastness of the dyed nano fiber was lower by $1/2\~1$ grade, light fastness by 1 grade than the dyed regular fiber.

• Textile Coloration and Finishing
• /
• v.33 no.3
• /
• pp.105-112
• /
• 2021

This study investigated the proper dyeing conditions, fastness and functionality of cotton fabrics dyed with Perilla frutescens var. acuta extract. Repeat dyeing, combination dyeing of persimmon juice and fermentation dyeing were conducted as dyeing conditions. It was confirmed that the ΔE and the K/S value of cotton fabrics dyed with Perilla frutescens var. acuta extracts depending on repeat dyeing and combination dyeing slightly increased. Furthermore, the fastness to washing of persimmon combination dyeing and fermentation dyeing was very good. The fastness to rubbing was shown to be above grade 4 in all methods, and the fastness to light was not as good as grade 3 or lower. The persimmon juice dyeing, Perilla frutescens var. acuta extract repeat dyeing 4 times and combination fermentation dyeing showed very good antimicrobial abilities. Thereafter, additional studies are needed to improve the fastness to light and alternatives to further improve the dyeing properties.

• Textile Coloration and Finishing
• /
• v.14 no.2
• /
• pp.102-102
• /
• 2002

The purpose of this study is to investigate dyeing properties of wool fabric with walnut colorants. Walnut colorants were extracted with water from walnut hull and characterized by FT-IR analysis. Effects of dyeing conditions and mordanting on dyeing properties and colorfastness were studied. Results obtained were as follows, 1. Higher K/S value was obtained at higher temperature and longer dyeing time, the highest K/S value was shown at 100℃, 60min. 2. Dye uptake was increased with the increase in colorants concentration up to 2%. Higher K/S value was obtained at acidic condition. 3. Mordanting was not effective for improving dye uptake and colorfastness and for changing color of the dyed fabric.

• Textile Coloration and Finishing
• /
• v.14 no.2
• /
• pp.26-32
• /
• 2002

The purpose of this study is to investigate dyeing properties of wool fabric with walnut colorants. Walnut colorants were extracted with water from walnut hull and characterized by FT-IR analysis. Effects of dyeing conditions and mordanting on dyeing properties and colorfastness were studied. Results obtained were as follows, 1. Higher K/S value was obtained at higher temperature and longer dyeing time, the highest K/S value was shown at $100^\circ{C}$, 60min. 2. Dye uptake was increased with the increase in colorants concentration up to 2%. Higher K/S value was obtained at acidic condition. 3. Mordanting was not effective for improving dye uptake and colorfastness and for changing color of the dyed fabric.

• International Journal of Human Ecology
• /
• v.8 no.2
• /
• pp.99-106
• /
• 2007

In this study, the mechanical properties related to the fabric appearance of well being functional bamboo knitted fabric before and after loess dyeing were evaluated. The mechanical properties of fabrics were measured by KES-F system, that is, shape retention, draping, wrinkle recovery, compression property, and surface properties, and total hand value of three types of knitted fabric, 100% bamboo, 100% cotton, and bamboo / cotton blend (60 / 40) were evaluated before and after loess dyeing. As a result, it was found that appearance density, shape retention, and drape coefficient of cotton knitted fabric were greater than those of bamboo knitted fabric. After loess dyeing, shape retention and drape coefficient, wrinkle recovery of bamboo knitted fabric improved and WC/C and MMD/SMD decreased. According to THV, the hand of bamboo/cotton blend knit is the best among three samples by compensation the weak properties of the two fiber. Therefore, loess dyeing seemed to be a good method for improving shape retention and hand value of 100% bamboo and bamboo blended fabric.

• Textile Coloration and Finishing
• /
• v.27 no.4
• /
• pp.301-308
• /
• 2015

This study optimizes dyeing conditions for polyamide-imide fabric using cationic dyes. Dyeing and fastness characteristics of polyamide-imide fabric were investigated with three cationic dyes and 2-hydroxyacetophenone as a swelling agent under various dyeing conditions such as dye and swelling agent concentrations, dyeing temperature and time, pH of dye bath. The dyeing properties were evaluated in terms of dye exhaustion, K/S value and color fastness. The optimized dyeing temperature and time were $130^{\circ}C$ for 90 min for the dyes. Under weak acidic conditions in the range pH 5 to 7, the exhaustion of cationic dyes could be enhanced leading to higher adsorption. Wash and rubbing fastness properties were generally good, while light fastness was slightly low, which can be attributed to the poor photo-stability of the cationic dyes.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2010.03a
• /
• pp.167-168
• /
• 2010

Non coating type Low melting yarn(L/M PET) not to use the polyurethane resin causing some problems was knitting and evaluated its dyeing characteristics, heat setting properties and flame-retardant properties without flame retardant agent or flame retardant fabric. In order to investigate the dyeing property of fabric of L/M PET, the dyeing of L/M PET was experimented at each different dyeing temperature. Higher exhaustion yield was achieved at lower temperature of L/M PET compared to regular PET. According to result of the study for the heat setting properties of L/M fiber, the K/S value of dyed L/M fiber increased as much as the heat setting temperature did. The experiment for the light fastness reached similar result to dyed PET. However washing fastness in L/M fiber showed lower grade compared with regular PET. flame-retardant efficiency of L/M PET without flame retardant agent or flame retardant fabric measured by $45^{\circ}$ burn test and Contact burn test. The flame?retardant performance of the sample was carried out according to the Korea Fire-fighting Standard.[KOFEIS 1001].