• 제목/요약/키워드: properties UV

검색결과 2,215건 처리시간 0.042초

기능성 프탈로시아닌 물질의 제조 및 대전방지/UV 차단 특성 (Preparations and Antistatic/UV Blocking Properties of Dual Functional Phthalocyanine Materials)

  • 강영구;임대우;김시석;박병기
    • 한국안전학회지
    • /
    • 제23권1호
    • /
    • pp.66-71
    • /
    • 2008
  • $PcFe(4-VP)_2$[Pc: Phthalocyanine, 4-VP: 4-Vinylpyridine]와 $PcFe(VIM)_2$[VIM: 1-Vinylimidazole]의 제조를 재래식 방법인 유기용제 사용에 따른 폭발 및 유해증기 발생 위험성을 차단하기 위해 무용제 방식으로 ligand인 4-VP와 VIM을 반응매체로 하여 PcFe를 밀폐용기에서 용융시키는 새로운 방법을 도입, 제조하여 분말상 진청록색의 물질을 제조하였다. 이들 물질은 $CH_2Cl_2$에 가용성인 $PeFeL_2$형태의 물질이다. 제조된 물질을 ATR-FTIR, UV/Vis, DSC/TGA, Surface Resistivity Meter를 이용하여 분석한 결과 film 상태에서 UV/Vis 차단 특성이 뛰어남과 동시에 대전 방지특성을 나타내며 또한 내열성이 우수한 물질이 제조되어 사용 및 응용이 가능할 것으로 사료된다.

Fabrication of ZnO inorganic thin films by using UV-enhanced Atomic Layer Deposition

  • 송종수;윤홍로;성명모
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.312.1-312.1
    • /
    • 2016
  • We have deposited ZnO thin films by ultraviolet (UV) enhanced atomic layer deposition using diethylznic (DEZ) and water (H2O) as precursors with UV light. The atomic layer deposition relies on alternating dose of the precursor on the surface and subsequent chemisorption of the precursors with self-limiting growth mechanism. Though ALD is useful to deposition conformal and precise thin film, the surface reactions of the atomic layer deposition are not completed at low temperature in many cases. In this experiment, we focused on the effects of UV radiation during the ALD process on the properties of the inorganic thin films. The surface reactions were found to be complementary enough to yield uniform inorganic thin films and fully react between DEZ and H2O at the low temperature by using UV irradiation. The UV light was effective to obtain conductive ZnO film. And the stability of TFT with UV-enhanced ZnO was improved than ZnO by thermal ALD method. High conductive UV-enhanced ZnO film have the potential to applicability of the transparent electrode.

  • PDF

Multi-cube UV source 이용한 PDP에서 광학시뮬레이션의 정확성 개선에 관한 연구 (Improvement of the Accuracy of Optical Simulation Using by the Multi-cube UV Source in PDP Cells)

  • 강정원;엄철환
    • 반도체디스플레이기술학회지
    • /
    • 제6권2호
    • /
    • pp.41-44
    • /
    • 2007
  • Optical simulation of the rear and front panel geometries were needed to improve the luminance and efficiency in PDP cells. The 3-dimensional optical code can be used to analyze the variation of geometries and changing of optical properties. In order to improve the accuracy of simulated results, a new UV source, called a multi-cubes UV source, was designed. To design the source, at first UV distribution was calculated with the plasma fluid code and then the UV distribution was transformed to the multi-cube structures in the optical code. Compared to the results from existing UV source, called a planar UV source, could be improved the accuracy of visible light distribution. Simulated results were also compared to the visible distribution measured with the ICCD in a real PDP cell.

  • PDF

UV 센서를 이용한 절연애자의 코로나 방전 측정 및 자외선 이미지의 비교 (Comparison of UV images and Measurement of the Corona Discharge from Insulators using the UV Sensor)

  • 김영석;최명일;김종민;방선배;송길목
    • 전기학회논문지
    • /
    • 제60권4호
    • /
    • pp.899-904
    • /
    • 2011
  • Inspections and diagnoses of corona discharge are important in order to prevent electrical faults of external insulation in power systems. This paper studies a measurement of ultra-violet rays(UV) strength of corona discharges on insulators using a UV sensor with an optic lens. The data has been compared with the images of a UV camera. The UV sensor estimated that DC voltage needed to be set at 700V for accurate data analysis of the properties of UV detected during corona discharge. UV was generated at 60kV when the corona discharge occurred. UV strength and images of UV increased at a high voltage. The image area of the UV using a UV camera and the detection of UV using a UV sensor have shown, that the polymer insulator mounted on a live part must be checked when the applied voltage on the good polymer insulator is greater than 37.5% of its breakdown voltage.

비파괴식 검사를 통한 선글라스의 품질에 관한 연구 (Properties of Sunglass Lenses by Non-Destructive Test for the Sunglass Standards)

  • 임용무;심문식;심현석;김상문
    • 한국안광학회지
    • /
    • 제6권1호
    • /
    • pp.125-131
    • /
    • 2001
  • 시중에서 시판되고 있는 완성품 선글라스를 고가형 23개, 저가형 55개를 대상으로 비파괴식 검사를 통하여 선글라스의 품질에 대한 분석을 행하였다. 선글라스렌즈의 일반적 광학성질은 규격을 대체적으로 만족할 정도였으며, 재질면에서 HIGH-type은 glass의 비율이 그리고 LOW-type은 Acrylate의 비율이 높았다. HIGH-type의 투과색은 무채색에 근접하였으나 LOW-type은 570 nm와 485 nm를 잊는 선상에 넓게 분포되었다. 렌즈 투과색의 자극순도의 규정을 벗어난 경우는 HIGH-type에서 7%, LOW-type에서 18%였다. UV/VIS cut-off는 HIGH-type의 경우에 350 nm, 380 nm, 400 nm를 초과하는 그룹으로 대별되었으며 LOW-type에서는 350 nm 이하 영역에 있는 경우가 6%에 달하였다. erythemal UV의 투과특성에 있어서 HIGH-type의 경우에는 모두 규격을 만족시켰으나 LOW-type의 경우에는 DIN 규격에서 최대 5개의 fail을 보였다. 또한 Near UV의 투과특성은 HIGH-type의 선글라스에서 더 많은 fail을 보였다. IR 투과특성에서는 LOW-type이 HIGH-type보다 열등한 특성을 보였다. 신호등 인지도의 경우에 HIGH-type은 모두 규격을 만족시켰지만 LOW-type은 21.8%가 만족시키지 못하였다. 대비감도 시력은 L의 증가와 함께 증가하였으며, 측정 거리의 감소와 함께 높아졌다. a와 b의 변화에 따른 대비감도 시력은 a-b 교점에 근접하는 경우 높은 값을 보였다. 선글라스 렌즈의 특성은 투과색, UV, IR, 신호등 가시도, 재질, 대비감도 시력 등의 종합적인 평가에 의해서 이뤄져야 하며 한가지 규격의 획일적 적용을 지양해야 한다. 비파괴식 선글라스 렌즈의 분석에 있어서 HIGH-type의 경우가 LOW-type에 비하여 종합적인 특성이 우수하였다.

  • PDF

SnO2 기반의 투명 UV 광 검출기 (SnO2-Embedded Transparent UV Photodetector)

  • 이경남;박왕희;김준동
    • 한국전기전자재료학회논문지
    • /
    • 제30권12호
    • /
    • pp.806-811
    • /
    • 2017
  • An all-transparent ultraviolet (UV) photodetector was fabricated by structuring $p-NiO/n-SnO_2/ITO$ on a glass substrate. $SnO_2$ is an important semiconductor material because of its large bandgap, high electron mobility, high transmittance (as high as 80% in the visible range), and high stability under UV light. For these reasons, $SnO_2$ is suitable for a range of applications that involve UV light. In order to form a highly transparent p-n junction for UV detection, $SnO_2$ was deposited onto a device containing NiO as a high-transparent metal conductive oxide for UV detection. We demonstrated that all-transparent UV photodetectors based on $SnO_2$ could provide a definitive photocurrent density of $4nA\;cm^{-2}$ at 0 V under UV light (365 nm) and a low saturation current density of $2.02nA{\times}cm^{-2}$. The device under UV light displayed fast photoresponse with times of 31.69 ms (rise-time) and 35.12 ms (fall-time) and a remarkable photoresponse ratio of 69.37. We analyzed the optical and electrical properties of the $NiO/SnO_2$ device. We demonstrated that the excellent properties of $SnO_2$ are valuable in transparent photoelectric device applications, which can suggest various routes for improving the performance of such devices.

Aspergillus의 UvsC group에 속한 돌연변이원 감수성 변이주 musN이 uvsC 돌연변이주와 다른 성질 (Different properties of mutagen sensitive musN mutant, a member of the UvsC group, from uvsC mutant strains in Aspergillus)

  • 채순기
    • 자연과학논문집
    • /
    • 제8권2호
    • /
    • pp.43-48
    • /
    • 1996
  • 돌연변이원 감수성 hyper-rec type musN 돌연변이주를 recombination 과 mutation에 관여하는 유전자들이 포함된 UvsC group에 포함시켰다. 하지만, rec- 및 UV에 의한 돌연변이가 일어나지 않는 uvsC 돌연변이주와는 달리 musN은 매우 다른 성질을 나타냈다. musN은 uvsC와는 달리 mutator가 아니었다. 또한, UV 조사에 따른 selenate resistant mutation도 야생주와 비슷한 수준으로 유발되었다. 분열하는 musN 세포에서의 UV 감수성 또한 uvsC와는 달리 정상이었다. 이같은 결과는 UcsC group이 branched pathways를 갖고 있음을 나타낸다.

  • PDF

Encapsulation of 2,4-Dihydroxybenzophenone into Dodecylbenzenesulfonate Modified Layered Double Hydroxide for UV Absorption Properties

  • Li, Shifeng;Shen, Yanming;Liu, Dongbin;Fan, Lihui;Wu, Keke
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권2호
    • /
    • pp.392-396
    • /
    • 2014
  • New organic-inorganic composite of 2,4-dihydroxybenzophenone (BP-1) encapsulation into dodecylbenzenesulfonate (DBS) modified layered double hydroxide (LDH) was successfully prepared. The surface, structural, thermal and absorption properties of the BP-1/DBS-LDH nanohybrid was characterized by BET analysis, scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TG) and diffuse reflectance UV-Vis absorbance spectra (DRUV-vis). The interlayer configuration of composite and the adsorption mechanism of BP-1 on MgAl-DBS-LDH were discussed. It was suspected that DBS anions located in the form of monolayer arrangement with a $75^{\circ}$ anti parallel angle between dodecylbenzenesulfonate chain axis. The diffuse reflectance UV-Vis absorbance results revealed that the UV absorbing wavelength of BP-1/DBS-LDH evidently extends to about 400 nm, which shows that the BP-1/DBS-LDH has the potential application as a UV absorber.