• 대한환경공학회지
• /
• 제33권5호
• /
• pp.368-377
• /
• 2011

소규모의 대기오염 배출원으로부터 질소산화물을 저감하는 방법으로 제안된 패키지형 SCR (selective catalytic reduction) 시스템 내에서 암모니아 농도제어에 관한 연구가 시행되었다. SCR 시스템의 효율은 촉매층의 효율적인 활용에 좌우되며 촉매층의 효율적인 사용은 시스템에 유입되는 배기가스의 유동균일도와 암모니아 농도의 균일도에 의해 좌우된다. 본 연구에서는 주어진 최적의 유동조건에서 SCR 시스템 내에 배치된 AIG 형상과 분사 유량 조정에 따른 암모니아 농도분포를 평가하였다. 기본 유동조건에서 분사구의 각도에 따른 전산해석 결과, 배가스 유동에 대해 동류방향($0^{\circ}$)으로 암모니아를 분사한 경우의 농도분포의 RMS(%) 수치는 약 95.3%, 대향방향인 $120^{\circ}$의 각도를 가지는 경우 90.1%로 파악되어 대향방향으로의 분사가 더 효율적인 것으로 파악되었다. 유동박리영역에서 벗어나도록 분사구의 위치를 변경하고 기초계산에서의 속도분포와 농도분포를 기준으로 환원제 유량을 조정한 결과 RMS(%) 수치를 최대 62.8%까지 하강시키는 효과를 가져왔다. AIG 형상 및 배치구조에 혼합증진의 효과를 정리하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권2호
• /
• pp.226-229
• /
• 2005

An experiment was conducted to produce eggs enriched with vitamins $D_3$, K and iron in eggs. Six hundred 97-wk-old ISA Brown force molted hens were allocated to completely randomized block arrangement of six dietary treatments: T1; control (C), T2; C+4,000 IU vitamin $D_3$+2.5 mg vitamin K+100 ppm Fe, T3; C+8,000 IU vitamin $D_3$+5.0 mg vitamin K+100 ppm Fe, T4; C+12,000 IU vitamin $D_3$+7.5 mg vitamin K+100 ppm Fe, T5; C+16,000 IU vitamin $D_3$+10.0 mg vitamin K+100 ppm Fe, T6; C+20,000 IU vitamin $D_3$+12.5 mg vitamin K+100 ppm Fe. Fe was supplemented with Fe-methionine. Each treatment consisted of five replicates of ten cages with two birds per cage. Egg production and egg weight were highest in T2 and incidence of soft and broken egg was highest in T6. Haugh unit was not different among treatments although it tended to be increased as dietary vitamins $D_3$ and K increased. Eggshell strength was not different among treatment. Concentrations of vitamin $D_3$ and K in egg yolk increased and plateaued approximately 20 days after feeding supplemented diets. The level of these vitamins peaked at 12,000 IU/kg vitamin $D_3$ and 7.5 mg/kg vitamin K supplementation and then decreased at the higher than these supplementation levels. The peak concentrations of vitamin $D_3$ and vitamin K were 4.6 times and 4.8 times greater than the control, respectively. Supplementary Fe also increased Fe content in egg yolk. It is concluded that vitamin $D_3$ and K in eggs can be effectively enriched by proper supplementation time and level of these vitamins.

• 한국철도학회논문집
• /
• 제19권6호
• /
• pp.744-754
• /
• 2016

아스팔트콘크리트 궤도는 아스팔트콘크리트 도상 위에 광폭침목 및 콘크리트 패널이 직결되는 궤도 형식으로서 각종 종 횡방향 외력에 대한 저항력이 요구된다. 따라서 본 논문에서는 광폭침목형 및 콘크리트 패널형 아스팔트콘크리트 궤도에 대해 종 횡방향 저항력 실험을 수행하고 궤도변위 저항 장치에 요구되는 필요 전단 저항력을 산정하였다. 또한 궤도변위 저항 장치로서 콘크리트 블록형 앵커 및 강관형 앵커를 개발하고 각각의 앵커 실험체에 대한 수평전단 실험을 수행하여 앵커 종류별 전단 저항력을 도출하였다. 그리고 아스팔트콘크리트 궤도에 궤도변위 저항 장치 적용 시, 전단 저항 성능 및 경제성 등을 고려하여 궤도변위 저항 장치 적정 개수 및 배치 설계(안)을 제시하였다.

• 콘크리트학회논문집
• /
• 제11권6호
• /
• pp.3-12
• /
• 1999

The larger, loftier and more highly strengthened the recent structures become, the greater attention is paid to the problem of thermal crack occurrence associate with hydration heat. As one of methods to solve the problem, a care has been taken to the improvement of construction such as the application of pre-cooling or pipe-cooling, adjustment of concrete block size, concrete placement timing, joint arrangement and so on. But it is expected that a proper selection of cement shall additionally contribute to the control of thermal cracks. In this study, thus, we selected 4 types of cements such as Type V for anti-sulphate, blast furnace cements (slag content of 45% and 65% respectively)and ternary blended low heat cement, and carried out mock-up tests. In every assigned time, temperatures and thermal stresses were measured and calculated from raw data. As a result of measurement, it was found that the magnitude of hydration heat is in order of blast furnace slag cement. Type V and ternary blended low heat cement. Results of thermal stresses were same as the order of temperature. In addition, thermal stresses calculated from the data of strain gauges showed almost similar to those measured from effective stress gauges only when strain values were adjusted properly in accordance with initial time of stress appearance. Theoretical results agreed well with the measured values comparatively, but showed slight differences. It is inferred that these differences shall be reduced if more tests capable of evaluating thermal characteristics of concrete are carried out.

• 가정과삶의질연구
• /
• 제27권6호
• /
• pp.155-169
• /
• 2009

Resident participation plays much of a rule to the cohousing, which is organized independently and has the characteristics of community life, especially in the initial state of cohousing process. However, it is hard to realize the resident participation in proper order due to lack of a personal time, individual effort and an insufficient knowledge related with cohousing. So, it is thought that the guidance of cohousing expert and coordinator is needed to enable the residents to perform in an active attitude. The development of educational program and workshop connected with resident participation is also accompanied. In this study, to make the positive and systematic participation of cohousing residents, we established the workshop program and performed workshop with our developed program, based on preceding researches and examples. We selected the object of workshop as five housewives in thirties and forties. Workshop was consisted of six process steps. (1) Introduction and question of workshop and cohousing (2) examining and arranging the opinion (3) Master plan of cohousing village (4) Planning of common living space (5) Planning of individual living space (6) Analysis of final results and evaluation of workshop. The workshop held six times and it took about five~six hours per each meeting. Workshop participants expressed their opinion actively and attended in a positive manner in order to the design of their desired village and cohousing. During workshop process, the players established the common target of their village by means of life card, target card game. Also, based on the common target, the layout of village was planned using a collage game and card arrangement game. By workshop activity, the members started to recognize the significance of participation on the drawing board and improve their technique of communication and decision-making. Furthermore, workshop process made it possible to approach the concrete forms of their cohousing village. Especially, in the closing phase, the participant satisfaction about workshop and cohousing is increased suddenly and expressed their intention to join the real workshop related with cohousing.

• 한국화재소방학회논문지
• /
• 제19권2호
• /
• pp.37-44
• /
• 2005

가스계소화설비인 $CO_2$소화장치의 구성 중 $CO_2$노즐수에 따른 유동특성 및 $CO_2$소화제 농도분포를 분석하기 위하여 $CO_2$ 노즐수를 변화시키면서 전산모사실험을 3차원 비정상상태로 수행하였다. 실제 선박의 기관실을 방호공간으로 선정하여 유동장과 $CO_2$소화제 농도장을 계산하였다. $CO_2$소화제 노즐수를 2개에서 4개로 증가시킬 경우는 낮은 농도분포를 나타냈고, $CO_2$소화제 노즐수를 6개 이상으로 증가시킬 경우는 전 영역에 영향을 미치는 재순환 유동이 형성되었다. $CO_2$소화제 노즐수를 4개 이상 증가시킬 경우는 0.36이하의 등농도선대가 확장 또는 수축되었다. 따라서 $CO_2$ 소화장치 설계 시 적정한 소화제노즐수와 노즐배열을 고려해야 할 것으로 생각된다.

• 한국정보과학회논문지:데이타베이스
• /
• 제33권3호
• /
• pp.342-352
• /
• 2006

최근의 XML 저장소에 관한 연구들은 기존의 데이타 저장을 위해 주로 사용해 왔던 관계형 데이타베이스에 효율적으로 XML 데이타를 매핑하는 기법이나 XML 데이타를 위한 새로운 전용 저장소에 대한 연구들이 주를 이룬다. XML 전용 저장소에서 많이 사용되는 방식으로 XML 문서를 파싱하여 각 노드들을 개별적인 객체로 생성한 후 이를 저장하는 방식이 있다. 이러한 저장 방식에서는 개별적인 객체들의 물리적 배치, 즉 클러스터링이 성능에 영향을 미칠 수 있다. 본 논문에서는 하나의 XML 문서를 보다 효율적으로 저장하는 클러스터링 기법을 제안한다. 제안하는 기법은 데이타 노드들의 경로 유사도를 기반으로 클러스터링을 수행하여 질의 요청에 대한 결과를 반환할 때 발생하는 페이지 I/O를 줄인다. 또한 경로 질의 처리시 필요한 클러스터만을 이용하여 질의 처리를 수행하는 방법을 제안한다. 이는 질의 처리과정에서 불필요한 데이타를 제외함으로써 결과적으로 탐색 공간의 크기를 줄일 수 있어 보다 효율적인 경로 질의 처리를 가능하게 한다. 이밖에 본 논문에서는 기존의 다른 클러스터링 기법들과 제안한 기법들과의 성능 비교를 수행하고, 이를 통해 적절한 클러스터링 기법을 이용하면 XML 저장소의 성능을 향상시킬 수 있음을 보인다.

• 전기학회논문지
• /
• 제63권3호
• /
• pp.409-413
• /
• 2014

GIS partial discharge that occurred in the UHF band signal is effectively detected by the method to IEC60270 5pc the apparent minimum discharge can be detected over the GIS arrangement of the sensor interior and exterior of the UHF in accordance with the optimized position signal by considering the damping ratio is selected so that the signals can be obtained to be mounted. 362kV, 800kV GIS is installed on the internal and external sensors are UHF band signal attenuation is set by measuring the reference value, but the operation, 170kV case 362kV, 800kV on the basis of the measurement data and to be installed and operated. When 170kV per 1Bay by installing the built-in sensor 1 for detecting a partial discharge signal, But, GIS signal attenuation is large in the case of an internal partial discharge signal is not detected in some cases. Where the attenuation is great UHF signal of the sensor by increasing the quantity of partial discharge signals were acquired to allow relocation. The greater the spacing between the sensor and the sensor is applied simplifies the installation and reduces the cost in terms of maintenance of appropriate optimal position is calculated to detect the partial discharge signal is needed. Thus 170kV GIS signal power attenuation of a partial discharge by measuring the UHF sensor, and by relocating the proper position is calculated in accordance with the sensor signal decay rate and minimize the error of omission in detecting a partial discharge signal was optimized.

• 한국실내디자인학회논문집
• /
• 제1호
• /
• pp.39-45
• /
• 1992

Today the design is recognized as indispensible part in business activities and it is demanded as one of the management strategies. since the ultimate goal of a hotel lines in the pursuit of profit, it is important that the design of a hotel faithfuly reflects the demands of management at the time of its construction planning. Furthermore, hotel planning undergoes a complicated design phases on a large scale, thus, utilization of a design process that accomodates retional approaches scientific and structural design activities, which will further reduce errors in design steps and pave a way for effective attainment of the target. Especially the management and designers review and confirm the design in relation to the strategic manegiable objective sat the early basic stage. The baseline set here will serve as a direction for the detailed design. In this context, this thesis formulates a reference baseline in dividing the space in view of the overall profitability and is based upon a survey conducted on the correlation between the operation of food and beverage section and the space. First, downtown hotels now take on the role of a public facility to a great extent and the number of Koreans who visit the autxiliary facilities of hotel increases. Second, recently revenue from a food and beverage section is in downtown and the trend is especially obrious at western restaurant, buffet and bar. This necessitates the reevaluation of the business space allocation. Third, sales promotion plan includes diversification, dessection and scaling down of the food and beverage section areas, Fourth, a proper number of seats must be determined in regard to the average area of one seat shown in the survey. Fifth, dense seat arrangement would entail a curtailment rather than a hike in revenue. Sixth, the installation of private dining room is on the rise and in particular, in Japanese and Chinese restaurants. Seventh, business space with declined revenue tends to induce the integration of similar businesses.

• 화약ㆍ발파
• /
• 제25권1호
• /
• pp.53-65
• /
• 2007

축소모형을 이용한 철근콘크리트 구조물 발파해체 시 구조물의 붕괴거동을 분석하기 위해서는 축소모형 부재에 대한 적절한 축소율 산정과 축소모형 부재를 구성하는 재료의 역학적 특성이 원형 철근콘크리트 부재와 상사되어야 한다. 본 연구에서 축소모형의 상사법칙은 밀도를 기준으로 산정하였고, 콘크리트 표준시방서와 콘크리트 구조설계기준에 의해 축소모형 철근콘크리트의 배합 및 배근을 기술하였다. 또한 축소모형 콘크리트의 축소율은 굵은골재 최대치수를 고려하여 부재 단면 길이를 1/5로 축소하였고, 축소모형 철근의 축소율은 공칭지름을 1/5로 축소하였다. 축소모형에 대한 역학적 실험결과로부터 제안된 상사법칙을 적용함으로써 축소모형 콘크리트의 평균압축강도 및 축소모형 철근의 평균항복강도가 상사관계를 가지는 것으로 나타났다.