• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.58-63
• /
• 2005

As fuel cells approach commercialization, hydrogen production becomes a critical step in the overall energy conversion pathway. Reforming is a process that produces a hydrogen-rich gas from hydrocarbon fuels. Hydrogen production via autothermal reforming (ATR) is particularly attractive for applications that demand a quick start-up and response time in a compact size. However, further research is required to optimize the performance of autothermal reformers and accurate models of reactor performance must be developed and validated. The design includes the requirement of accommodating a wide range of experimental set ups. Factors considered in the design of the reformer are capability to use multiple fuels, ability to vary stoichiometry, precise temperature and pressure control, implementation of enhancement methods, capability to implement variable catalyst positions and catalyst arrangement, ability to monitor and change reactant mixing, and proper implementation of data acquisition. A model of the system was first developed in order to calculate flowrates, heating, space velocity, and other important parameters needed to select the hardware that comprises the reformer. Predicted performance will be compared to actual data once the reformer construction is completed. This comparison will quantify the accuracy of the model and should point to areas where further model development is required. The end result will be a research tool that allows engineers to optimize hydrogen production via autothermal reformation.

• Journal of Nutrition and Health
• /
• v.44 no.4
• /
• pp.338-343
• /
• 2011

This study assessed the current EAR, RDA, and AMDR for protein, which were set in 2005 and revised in 2010 as the DRIs for Koreans. A classical approach to establish the EAR for protein has been the nitrogen balance method. This method has practical limitations and problems in statistical analysis by giving over estimations of nitrogen balance. Thus, the present EAR for protein might be lower than the true requirement. Recent reevaluations of nitrogen balance studies by bilinear regression analysis and the IAAO method have indicated that the EAR of 0.66 g/kg bw/d should be increased by 39% to give 0.92 g/kg bw/d. The AMDR for protein in the Korean DRIs was set at 7-10%, which covers almost the entire population's protein intake. Since the 5th percentile of Korean protein intake is close to 10% of energy and due to the beneficial effects of protein beyond the maintenance of nitrogen equilibrium, the lower range of 7% needs to be increased up to 10%. For practical meal arrangement, 15% of energy as protein, which is close to the average protein intake of Koreans, seems to be proper, although the value is almost two times the EAR.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.1
• /
• pp.179-190
• /
• 2016

Awareness about health is still in short supply, sufficient research and investment is falling mothayeo made, the development of image and health technology for health compared to productivity enhancement technology behind the relative reality. Through the analysis and study of special measures and health education in the country catering to propose measures and methods for this. Current analyzed and summarized to find a special health and safety training relevant provisions appear in the national legislation. By analyzing the characteristics and to leverage to workers unearthed an in-depth awareness and issues for the institutions and laws. Survey research methods to analyze the documents and government publications and research through an Internet search. Survey Research conducted a self - survey on new knowledge and attitude toward the concessionaires to sanitation target, the attitude of the sanitary administration, attitudes to hygiene education and hygiene practice Conditions received health education carried out by catering Federation regularly. Health education is a systematic settlement system for the external reality of professional education. Health and health administrators to establish an organizational structure strengthening phase. Employers and health care workers are raising awareness. Employers have a responsibility to prevent industrial accidents. Consequently, special health education targeted construction workers changed to fit the content-driven information on the species and the proper arrangement of time "based health education" currently being conducted.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.4
• /
• pp.378-385
• /
• 2009

In establishing silent environment such as automobile and industrial instrument, the roles of the insulating materials are critical. The proper and effective positioning of insulating materials is essential in the field of noise as well as in designing silent automobile. In this paper, we proposed the systematic and efficient scheme for optimizing complete automotive interiors for noise control. In order to attain this purpose, following analysis has been carried out: First, measuring the Biot parameters of insulating materials and the transmission loss with reflecting the appropriate arrangement of insulating materials has been experimented. In addition, we made comparison among transmission loss by the tools of analysis and verification, experimental value under consideration of various situations of automobile and analysis by the SEA.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.453-461
• /
• 1999

In this paper, we have studied on the effects of annular and quadrupole illuminations by changing their conditions for enhancing the pattern resolution and depth of focus (OaF) in the optical lithography system using KrF Eximer laser 0.248$\mu$m and 0.65 NA. As a result, it is revealed that each illumination condition to optimize the resolution and the OaF for the mask containing the assistance pattern is different under the annular illumination. And in case of quadrupole illumination, we could ascertain that the resolution and the OaF would be enhanced through changing the arrangement of each pole from the conventional X type (45 degrees) to some proper type according to the main pattern direction. ction.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.231-238
• /
• 2001

To investigate the underground structure of shallow water, Han-river near Yangsou-Ri, high resolution hydroacoustic measurements were carried out for the engineering design of railroad bridge. The acoustic source was a Boomer with an energy of 90 to 280J and in a frequency range up to about 16KHz. The reflected signals were received by using both traditional hydrophones(passive element) and a specially devised receiver unit(active element) mainly composed of piezofilms and preamplifier. They are connected to the "SUMMIT" data acquisition system(DMT-GeoTec company), where the sampling interval was set to 1/32㎳. The source position was continuously monitored by a precision DGPS system whose positioning accuracy was on the order of loom. For the quality control purposes, two different source-receiver geometries were taken. That is to say, the measurements were repeated along the profile everytime depending on the different source energy(175J, 280J), the receiving elements(passive, active) and two different source-receiver geometries. It was shown that the data resolution derived from a proper arrangement with the active hydrophone could be greatly enhanced and hence the corresponding profile section caused by the regular data processing system "FOCUS" accounted excellently for the underground formation below the shallow water.w the shallow water.

• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.434-445
• /
• 2014

The meaning of this research is to make recognition for necessity of ergonomic fashion design research. And the purpose is to provide the guidelines for ergonomic fashion product development. For this, literature research and analysis of empirical illustration of product design indicating ergonomics characteristic are implemented. Among the body-conscious active sportswear, cycle wear, swim suit, and skin scuba wet suit were selected and analyzed. Then they were explained according to the ergonomics characteristics arranged previously. Lastly, the features of ergonomic fashion design were arranged by composition elements of the clothing such as pattern, sewing, material and detail. The characteristics of ergonomic design derived from literature and advanced researches are efficiency, usability, functionality and safety. Through research and analysis, the characteristics of ergonomic fashion design are as followings. In pattern, it is related to the 3D structure division pattern, the reduction pattern design, the closing & opening part design for easy detachment, the receipt and the changeable design. In sewing, it is related to the use of latest sewing techniques and the finish using silicon or rubber band. In material, it is related to the use of high performance fabrics and the proper arrangement of these. In detail, it is related to the convenient detail, the storage detail, the adjustable detail, and the body protection detail.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.3 s.246
• /
• pp.260-268
• /
• 2006

The micromechanical approach was used to investigate the interfacial strain distributions of a unidirectional composite under transverse loading in which fibers were usually found to be randomly packed. Representative volume elements (RVE) for the analysis were composed of both regular fiber arrays such as a square array and a hexagonal array, and a random fiber array. The finite element analysis was performed to analyze the normal, tangential and shear strains at the interface. Due to the periodic characteristics of the strain distributions at the interface, the Fourier series approximation with proper coefficients was utilized to evaluate the strain distributions at the interface for the regular and random fiber arrays with respect to fiber volume fractions. From the analysis, it was found that the random arrangement of fibers had a significant influence on the strain distribution at the interface, and the strain distribution in the regular fiber arrays was one of special cases of that in the random fiber array.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.3
• /
• pp.201-209
• /
• 2009

The objective of present research work is to design the heat conductive mould to improve cooling characteristics of the injection mould for a mouse. In order to obtain the high cooling rate of the mould, a heat conductive mould with three different materials was designed. The materials of the base structure, the mid-layer and the molding part of the heat conductive mould were chosen as Cu-Ni alloy (Ampcoloy 940) to improve the heat conductivity of the mould, Ni-Cu alloy (Monel 400) to reduce a thermal stress, injection tool steel (P21), respectively. Through the three-dimensional transient heat transfer analysis and the thermal stress analysis, the effects of the geometrical arrangement of each material on the cooling characteristics and the thermal stress distribution were examined. From the results of the analyses, a proper design of the thermal conductive mould was obtained.

• The Korean Journal of Cytopathology
• /
• v.5 no.2
• /
• pp.130-136
• /
• 1994

Urinary cytology is increasingly accepted as a diagnostic tool in the detection and follow-up of patients with bladder cancer. However, its value is reduced by several limitations, especially by the lack of cytologic criteria specifically reflecting the morphology of low-grade urothelial neoplasm. We reviewed histologically proven 50 cases of urine cytology with emphasis on cytologic findings of benign atypia and differential findings of urothelial neoplasm according to the grade. The diagnoses included 17 benign lesions(including 5 cases of urine calculi) and 33 malignant lesions (including 28 transitional cell carcinomas, 3 squamous cell carcinomas, 1 adenocarcinoma and 1 prostate adenocarcinoma), Diagnostic accuracy was 92%. Important cytodiagnostic criteria for benign atypia and low grade malignancy were cellularity, number of cell clusters, and morphology and arrangement of urothelial cells. The cytologic findings of urothelial neoplasms according to histologic grade were relatively well correlated with the histologic findings. However, the cytologic criteria were not sufficient to readily distinguish grade I from grade II. In view of this, we think that cytologic nomenclature "low-grade" and "high-grade" is a more reliable criterion. Recognition of subtle cellular morphologic features specific for urothelial lesions(including benign or malignancy) and proper fixation, processing and staining of specimen can expand the role of urinary cytology In detection and follow-up of patients.