• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.461-471
• /
• 1989

For the mixed-mode crack problems the direction of crack growth, the crack path and the rational representation of fatigue crack growth rates should be studied to predict fatigue life and safety of structures. In this study, a round specimen which produce nearly identical effects in all loading directions is proposed to make an easy measurement of initial direction of crack growth. The mode I and mode II stress intensity factors of the specimen were calculated using finite element method, in which the square root singular stresses at the crack tip are modeled by means of four rectangular quarter-point eight-noded elements surrounding the crack tip. Experimental results for high strength aluminum alloy showed that the direction of mixed-mode crack growth agree well with maximum principal stress criterion as well as minimum strain energy density criterion, but not with maximum shear stress criterion. From data of fatigue crack growth rates using crack geometry projected on the line perpendicular to the loading direction it is easily established that mixed-mode fatigue crack growth in 5083-H115 aluminum alloy goes predominantly with mode I crack growth behaviors.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.4
• /
• pp.446-454
• /
• 2023

The impact of climate change on agriculture is substantial, especially as global warming is projected to lead to varying temperature and humidity patterns in the future. These changes pose a higher risk for both crops and livestock, exposing them to environmental stressors under altered climatic conditions. Specifically, as temperatures are expected to rise, the risk of heat stress is assessable through the Temperature-Humidity Index (THI), derived from temperature and relative humidity data. This study involved the comparison of THI collected from 10 Korea Meteorological Administration ASOS stations spanning a 60-year period from 1961 to 2020. Moreover, high-resolution temperature and humidity distribution data from 1981 to 2020 were employed to generate high-resolution TH I distributions, analyzing temporal changes. Additionally, the number of days characterized by heat stress, derived from TH I, was compared over different time periods. Generally, TH I showed an upward trend over the past, albeit with varying rates across different locations. As TH I increased, the frequency of heat stress days also rose, indicating potential future cost increases in the livestock industry due to heat-related challenges. The findings emphasize the feasibility of evaluating heat stress risk in livestock using THI and underscore the need for research analyzing THI under future climate change scenarios.

• Journal of the Korean Society of Visualization
• /
• v.3 no.1
• /
• pp.78-89
• /
• 2005

An experimental study was carried out to investigate the effect of local ultrasonic forcing on a turbulent boundary layer. Stereoscopic particle image velocimetry (SPIV) was used to probe the characteristics of the flow. A ultrasonic forcing system was made by adhering six ultrasonic transducers to the local flat plate. Cavitation which generates uncountable minute air-bubbles having fast wall normal velocity occurs when ultrasonic was projected into water. The SPIV results showed that the wall normal mean velocity is increased in a boundary layer dramatically and the streamwise mean velocity is reduced. The skin friction coefficient (C$_{f}$) decreases 60$\%$and gradually recovers at the downstream. The ultrasonic forcing reduces wall-region streamwise turbulent intensity, however, streamwise turbulent intensity is increased away from the wall. Wall-normal turbulent intensity is almost the same near the wall but it increases away from the wall. In the vicinity of the wall, Reynold shear stress, sweep strength and production of turbulent kinetic energy were decreased. This suggests that the streamwise vortical structures are lifted by ultrasonic forcing and then skin friction is reduced.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.4 no.2
• /
• pp.113-129
• /
• 2000

This study evaluates the behavior and strength of an anchorage zone of the prestressed concrete box girder bridge on the Kyungboo highway railroad using the 2D SUB-3D STM approach and a linear elastic finite element analysis. The 2D SUB-3D STM approach utilizes several two-dimensional sub strut-tie models that represent the compressive and tensile stress flows of each projected plane of the three-dimensional structural concrete in the selection of a three dimensional strut-tie model, evaluation of the effective strengths of the concrete struts, and verification of the geometric compatibility condition and bearing capacity of the critical nodal zones in the selected three-dimensional strut-tie model. The finite element analysis uses an 8-node brick element and the longitudinal prestressing force is considered as the equivalent nodal force. Analysis results show that the 2D SUB-3D STM approach and linear elastic finite element method can be effectively applied to the analysis and design of three-dimensional structural concrete including a prestressed concrete box girder anchorage zone.

• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.306-313
• /
• 2023

Having pet is one of the activities people living in modern society do to relieve stress and find peace of mind. Currently, the object of companion animals has moved beyond being a real 'living entity' and has developed to a stage where the animal's upbringing process can be enjoyed in a virtual space by being programmed in digital content. This paper studies detailed elements such as character design, interaction, and realism of 'Tamagotchi (1996)', which can be said to be the beginning of digital training content, and 'Peridot (2023)', a recently introduced augmented reality-based training content. The point was that it was training content using portable electronic devices. However, while the environment in the electronic device in which Tamagotchi's character exists was a simple black and white screen, the environment in which Peridot's character operates has been changed to the real world projected on the screen based on augmented reality. Mutual communication with characters in Tamagotchi remained a response to pressing buttons, but in Peridot, it has advanced to the point where you can pet the characters by touching the smartphone screen. In addition, through object and step recognition, it was confirmed that the sense of reality had become more realistic, with toys thrown by users on the screen bouncing off real objects. We hope that this research material will serve as a useful reference for the development of digital training content to be developed in the near future.

• Korean Journal of Materials Research
• /
• v.1 no.3
• /
• pp.125-131
• /
• 1991

Boron penetration phenomenon of $p^{+}$ silicon gate with as-deposited amorphous or polycrystalline Si upon high temperature annealing was investigated using high frequency C-V (Capacitance-Volt-age) analysis, CCST(Constant Current Stress Test), TEM(Transmission Electron Microscopy) and SIMS(Secondary Ion Mass Spectroscopy), C-V analysis showed that an as-deposited amorphous Si gate resulted in smaller positive shifts in flatband voltage compared wish a polycrystalline Si gate, thus giving 60-80 percent higher charge-to-breakdown of gate oxides. The reduced boron penetration of amorphous Si gate may be attributed to the fewer grain boundaries available for boron diffusion into the gate oxide and the shallower projected range of $BF_2$ implantation. The relation between electron trapping rate and flatband voltage shift was also discussed.

• Journal of Korean Foot and Ankle Society
• /
• v.11 no.2
• /
• pp.198-203
• /
• 2007

Purpose: To assess the arthroscopic findings in chronic lateral ankle instability and to evaluate the results of modified $Brostr{\ddot{o}}m$ operation and arthroscopic procedures. Materials and Methods: Twenty-nine cases with chronic lateral ankle instability were treated with modified $Brostr{\ddot{o}}m$ operation and ankle arthroscopy from May 2004 to January 2007. There were 19 male and 10 female with the mean age of 29.7 years. Mean follow up period was 15.8 months. All patients were checked preoperative stress anterior drawer and varus test with X-ray. Results: Associated injuries were 28 fat impingement projected into the joint between distal tibio-fibular space, 20 anterior impingement of soft tissue, 19 osteochondral defects and 13 loose body. Preoperative AOFAS score of pain, function and alignment were 28.9, 34.1 and 7.9 each other. They were improved into 38.7, 40.8 and 9.8 postoperatively. Conclusions: Modified $Brostr{\ddot{o}}m$ operation with ankle arthroscopy for chronic lateral ankle instability is believed to be a reliable option to obtain satisfactory results. Careful attention to the associated injuries such as distal fat impingement, anterior impingement, osteochondral defect and loose body is needed during the arthroscopy.

• Journal of Community Nutrition
• /
• v.2 no.1
• /
• pp.5-11
• /
• 2000

Populations both in the US and worldwide are aging. It is projected that by the year 2030 the population of Americans over 65 will increase to 70 million, more than twice their number in 1998. About one-third of elderly over the age of 65 have debilitating chronic health conditions that greatly impede their activities. Age-associated chronic diseases are believed to be associated with free radicals and the imbalance in antioxidant and oxidative stress contributes to development of several chronic health conditions. Diet and nutrients can have great impact in the health status of elderly. Several factors may contributor to the inadequate consumption of nutrients in elderly, including an inability to chew food adequately, polypharmacy, living along and limited income. Low intake of energy and several micronutrients are common among the elderly. Although overt deficiency of nutrients among the elderly is not common. a recent study showed that while elderly consume more fat, the total energy intake is low among the elderly. Inadequate intake of antioxidant nutrients such as vitamin E in elderly may contribute to the development of chronic health problems. Intake of higher than normal RDA levels of vitamin E for long periods of time has been shown to reduce the risk of many degenerative diseases, such as cardiovascular diseases(CVD) and cancer, and improve immune response in elderly. High intake of other antioxidants is also associated with reduced risk chronic diseases. Dietary antioxidants are abundant in fruits and vegetables. However, due to variety of factors, the elderly may not be able to receive these and other micronutrients through diet. Therefore, supplemental intake of micronutrients in the form of multi vitamins/minerals and/or specific micronutrients is a more practical approach to the maintenance of health status in the elderly.

• International Journal of Concrete Structures and Materials
• /
• v.11 no.2
• /
• pp.343-363
• /
• 2017

The objective of this work was finding out the most advisable testing conditions for an effective and robust characterization of the tensile strength (TS) of concrete disks. The independent variables were the loading geometry, the angle subtended by the contact area, disk diameter and thickness, maximum aggregate size, and the sample compression strength (CS). The effect of the independent variables was studied in a three groups of experiments using a factorial design with two levels and four factors. The likeliest location where failure beginning was calculated using the equations that account for the stress-strain field developed within the disk. The theoretical outcome shows that for failure beginning at the geometric center of the sample, it is necessary for the contact angle in the loading setup to be larger than or equal to a threshold value. Nevertheless, the measured indirect tensile strength must be adjusted to get a close estimate of the uniaxial TS of the material. The correction depends on the loading geometry, and we got their mathematical expression and cross-validated them with the reported in the literature. The experimental results show that a loading geometry with a curved contact area, uniform load distribution over the contact area, loads projected parallel to one another within the disk, and a contact angle bigger of $12^{\circ}$ is the most advisable and robust setup for implementation of BT on concrete disks. This work provides a description of the BT carries on concrete disks and put forward a characterization technique to study costly samples of cement based material that have been enabled to display new and improved properties with nanomaterials.

• The Korean Journal of Zoology
• /
• v.38 no.4
• /
• pp.570-579
• /
• 1995

Ultrastructural and histochemical changes of mucous cells In the freshwater and seawater-adapted guppy (Poecflia reticulatus) gills were observed by the light, scanning-and transmisslon~lectron microscopes. The mucous cells were usually located in the epithelium of primary lameilne projected from the gill arch. The rough endoplasmic retIculum and Golgi complex were hIghly developed In immature mucous cells. The mature mucous cells were nearly filled with the mucous granules. In the freshwater guppy, the histochemical properties of the mucous cells were a mixture of the neutral mucin, sialomucin and sulfomucin. When guppy was adapted to the seawater, the content of acid glycoproteins (slalomucln and sulfomucin) was decreased. In addition, the number of mucous cells in the seawater-adapted group was less than a third of those in the freshwater one. These results suggest that the seawater-adapted guppy would react to the changed osmotic stress of the seawater. And also, the environmental change by the increased salt concentraion might lead to reduce the chance of infections.