• 한국토양비료학회지
• /
• 제48권5호
• /
• pp.522-527
• /
• 2015

Decision of available soil depth based on soil physical and hydraulic properties for the $3^{rd}$ Landscape Vegetation Project in the Incheon International Airport was attempted. The soil samples were collected from the 8 sites at different depths, 0-20 and 20-60cm, for the three project fields, A, B, and C area. Physical and chemical properties including particle size distribution, organic matter content and electrical conductivity were analyzed. Hydrological properties including bulk density and water holding capacity at different water potential, -6 kPa, -10 kPa, -33 kPa, and -1500 kPa were calculated by SPAW model of Saxton and Rawls (2006), and air entry value was calculated by Campbell model (1985). Based on physical and hydrological limitation, feasibility and design criteria of soil depth for vegetation and landfill were recommended. Since the soil salinity of the soil in area A area was $19.18dS\;m^{-1}$ in top soil and $22.27dS\;m^{-1}$ in deep soil, respectively, landscape vegetation without amendment would not be possible on this area. Available soil depth required for vegetation was 2.51 m that would secure root zone water holding capacity, capillary fringe, and porosity. Available soil depth required for landscape vegetation of the B area soil was 1.51 m including capillary fringe 0.14 m and available depth for 10% porosity 1.35 m. The soils in this area were feasible for landscape vegetation. The soil in area C was feasible for bottom fill purpose only due to low water holding capacity.

• Journal of Veterinary Science
• /
• 제23권6호
• /
• pp.70.1-70.13
• /
• 2022

Background: Fat stranding is a non-specific finding of an increased fat attenuation on computed tomography (CT) images. Fat stranding is used for detecting the underlying lesion in humans. Objectives: To assess the clinical significance of fat stranding on CT images for identifying the underlying cause in dogs and cats. Methods: In this retrospective study, the incidence, location, extent, distribution, and pattern of fat stranding were assessed on CT studies obtained from 134 cases. Results: Fat stranding was found in 38% (51/134) of all cases and in 35% (37/107) of tumors, which was significantly higher in malignant tumors (44%) than benign tumors (12%). Moreover, fat stranding was found in more than two areas in malignant tumors (16/33) and in a single area in benign tumors (4/4). In inflammation, fat stranding was demonstrated in 54% (7/13) in a single area (7/7) as a focal distribution (6/7). In trauma, fat stranding was revealed in 50% (7/14) and most were in multiple areas (6/7). Regardless of the etiologies, fat stranding was always around the underlying lesion and a reticular pattern was the most common presentation. Logistic regression analysis revealed that multiple areas (p = 0.040) of fat stranding and a reticulonodular pattern (p = 0.022) are the significant predictors of malignant tumor. Conclusions: These findings indicated that CT fat stranding can be used as a clue for identifying the underlying lesion and can be useful for narrowing the differential list based on the extent and pattern.

• 생태와환경
• /
• 제55권4호
• /
• pp.390-397
• /
• 2022

북극 이사회 산하 "북극동식물보전 워킹그룹"은 북극 생물다양성을 보전하고 생물자원의 지속가능성을 보장하기 위해 모니터링, 평가, 정책, 전문가 그룹 활동을 수행하고 그 결과를 정부들과 북극원주민들에게 전달한다. 북극 동식물보전 워킹그룹의 주요업무는 모니터링, 평가, 전략 사업으로 구성되어 있다. 주요 모니터링 사업은 "환북극 생물다양성 모니터링 (해양, 담수, 육상, 연안) 프로그램", 평가 사업은 "북극생물다양성평가", 전략 사업은 "북극철 새이니셔티브"이다. 우리나라는 2013년 북극 이사회 옵서버 국가 지위 획득 후 2015년부터 북극철새이니셔티브 사업에 직접 참여하고 있다. 북극철새이니셔티브는 북극에서 번식하는 철새들이 이용하는 전 세계 이동경로 상의 서식지를 보전하고 불법 사냥을 방지하는 것이 목적이다. 따라서, 철새 이동경로상의 옵서버 국가들이 직접적으로 사업에 참여하고 있다. 우리나라는 2030년까지 북극협력사업 참여를 위한 우선순위 선정 시 기존에 참여하고 있는 북극 철새이니셔티브와 국내 공공기관들이 운영 중인 북극 관련 아카데미 프로그램을 활용해 "CAFF 청년 프로그램" 참여 방안을 고려할 필요가 있다.

• 한국환경복원기술학회지
• /
• 제23권5호
• /
• pp.87-98
• /
• 2020

At the point of implementing policies related to urban heat through the overall environmental assessment of the city using national data, citizen science projects that can collect data in a wide range are emerging for effective policy establishment. Although the utility of citizen data is improving, data quality is a primary concern for researchers employing public participation in scientific research. In this study, validation was conducted based on citizen data acquired in the "Suwon City Heat Map Project", and the applicability to temperature monitoring was confirmed based on the results. As a result of analyzing the validity verification of citizen data using three methods, the data result value is 0.843, RMSE: 0.683℃, and a meaningful value was found within 3km of national data. We found that citizen data utilization is high through the results of this study and These projects are expected to be used as basic data for establishing effective policies or can be reflected in the various planning.

• 청정기술
• /
• 제10권1호
• /
• pp.27-35
• /
• 2004

현재 국내 피혁 업체에서는 대표적인 공해 산업으로 인식되어 있는 피혁 산업의 환경 문제를 해결하기 위하여 심혈을 기울이고 있다. 피혁 선진국에서는 피혁 전문 연구소 및 약품회사, 피혁 업체가 공동으로 대응하여 기술 개발 및 진단, 친환경 약품을 개발하고자 노력하고 있으며 본 연구는 청정 피혁 생산을 위한 저크롬 탄닝 공정 기술 보급 사업을 통하여 환경 문제의 해결하기 위하여 진행되었다. 특히 폐수나 고형폐기물의 형태로 존재하는 크롬의 처리에 환경적, 경제적 문제점으로 인해서 크롬을 적게 사용하는 저크롬 유제 공정과 크롬의 사용을 완전히 배제한 비크롬 유제 공정 기술을 대표적인 4개의 대상기업을 선정하여 기술 이전을 실시한 대표적인 친환경 제혁 기술을 소개 하고자 한다. 아울러 경량성 피혁 소재의 개발을 위해서 비금속을 이용하는 연구를 진행하고 있다.

• 대한영양사협회학술지
• /
• 제7권1호
• /
• pp.87-104
• /
• 2001

This study was conducted as a part of the project developing the standards of national board test for the dietitian's licence. The purpose of this study was to define the job description of dietitians, and to describe the task elements based on the detailed analysis of the dietitians' work. This study team established the research team which was composed of food and nutrition experts, 7 of registered dietitians and 3 of university professors. Draft job description form was made to fully explain the dietitians' task elements, process and sequence by the research team. Final job description form was confirmed after the validity of 576 task elements was reevaluated upon 4 point scale test based on the frequency, importance, and difficulty by 21 field registered dietitian by the study team. It was also confirmed by the university. This form was formated by following DACUM method which analyzed the job description containing duty, task and task elements. It was organized to include every dietitians' work and to describe the every detailed process of work. Duty was defined as the specific and independent work as a dietitian, and was composed of 17 parts, i.e 10 parts in food supply management area and 6 parts in nutritional care service area and self promotion area. Duties were also divided into 99 tasks containing the 576 detailed task elements to describe definite action, steps and decisions. Seventeen parts are following; menu planning, storage and inventory control, food production, meal service, waste management, sanitation, equipment and facility management, human resource management, financial management, nutrition assessment of life cycle, nutritional assessment of several disease, nutritional assessment in specific condition, medical nutrition therapy, nutritional education, public health nutrition and self promotion. If these protocols are properly performed and presented, they can provide the likelihood that dietetics professionals work as a primary contributors in promoting health care and preventing disease nationally.

• 박물관보존과학
• /
• 제9권
• /
• pp.85-93
• /
• 2008

국립중앙박물관 보존과학팀에서는 서화유물도록 발간 사업의 일환으로 초상화 3점을 보존처리 하였다. 그 중 조경영정은 조선 17세기 대표적인 선무공신상(宣武功臣象)으로 1997년 기증된 유물이며, 견본채색 전신상으로 족자표장이 되어 있다. 이 영정은 화견(畵絹)이 배접지와 완전히 들떠 있으며, 안료의 박락 등 열악한 상태를 유지하고 있었다. 이에 보존처리 전 과학적 조사(현미경 조사, XRF, X-ray)를 통해 제작기법 및 재질을 조사하고 해체, 클리닝, 배접지 제거, 결손부 보강, 배접, 마무리 순으로 보존처리 하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.124-143
• /
• 2010

Cofferdam is a temporary levee or dam structure built by using sheet pile or earth materials to prevent water infiltration during construction work of bridge, dam, harbour dock, or hydraulic structures in the river. In this regard, it is required to secure cutoff ability for dry work and workability for rapid installation and removal of the temporary dam or levee structures. In this paper, case studies for design and construction of cofferdam were performed, and water diversion method was briefed with some examples of cofferdam type as well. For the case study details of design and construction were reviewed based on cofferdams under construction related to 16 submerged weirs of "The 4-river restoration project" and dam type cofferdam respectively. From the review, it was known that the method for changing the water flow is selected based on the data from geological and geo-hydraulic site investigation in order to mitigate environmental effects by making sure if the design cross-sectional area of flow and maximum working days are sufficiently guaranteed. Finally, the primary findings and main conclusion derived are summarized that determination of applicable type of cofferdam should be checked by case study and meet design requirements such as water inflow control, constructability.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.815-826
• /
• 2009

The paper presents a case study addressing the design and construction aspects for DCM(Deep Cement Mixing) method employed as the foundation of a caisson type breakwater with heavy weight(10,700 ton/EA) and a high design wave height($H_{1/3}$=8.7m). The DCM was designed for the project(Ulsan New Port North Breakwater Phase 1) by optimizing the pattern of DCM columns with a combination of short and long columns (i.e., block type(upper 3m)+wall type(lower)) and considering overlapped section between columns as a critical section against shear force where the coefficient of effective width of treated column($\alpha$) was estimated with caution. It was shown that the value can be 0.9 under the condition with the overlapped width of 30cm. In addition to that, a field trial test was performed after improving conventional DCM equipment (e.g., mixing blades, cement paste supplying pipes, multi auger motor, etc.) to establish a standardized DCM construction cycle (withdrawal rate of mixing blades) which can provide the prescribed strength. The result of the field strength test for cored DCM specimens shows that the averaged strength is larger than the target strength and the distribution of the strength(with a defect rate of 7%) also satisfies with the quality control normal distribution curve which allows defect rate of 15.9%.

• Perspectives in Nursing Science
• /
• 제4권1호
• /
• pp.9-18
• /
• 2007

Background: Intersectoral and multidisciplinary collaboration is becoming more prominent in all facets of government, health, social services, and scientific endeavors. An interplay of a multitude of driving forces moves multiple disciplines forward to achieve quality outcomes in health and social sciences services and research. Aim: This paper aims at discussing the prospects for future multidisciplinary collaboration. If inter organizational integration and multidisciplinary collaboration are the ways of the future in academia and the scientific world, it then becomes crucial to examine what lies ahead for the nursing profession, Discussion: This paper argues that in order for multidisciplinary endeavors to succeed, the leaders in multidisciplinary teams shoulder the largest share of the responsibilities involved. In developing a lasting team constituting professionals from different disciplines, the leader needs to include the right individuals in the team, identify a common goal, build trusting relationships through open communication and interprofessional education, and empower members through creating room for autonomy and at the same time allowing space for personal development. The leader will need to utilize information technologies to manage communication issues in a large multi-site multidisciplinary project. Lastly, he or she must be able to demonstrate team productivity through process and outcome evaluation. It needs to be emphasized that it falls to each individual nurse to speak up and act upon what nursing believes and represents in our quest for success in multidisciplinary endeavors. Conclusion: The significance of the role of the leader is paramount for a team to succeed. Yet there is no prospect if only a handful of exceptional nurse leaders are moving ahead in multidisciplinary endeavors. Without the actualization of professional roles by each individual nurse, the profession will have no prospect in collaborations across disciplines.