• 한국안광학회지
• /
• 제18권3호
• /
• pp.241-246
• /
• 2013

목적: 본 연구에서는 프리폼 누진렌즈와 일반 누진렌즈를 착용 하였을 때 원거리 대비감도에 미치는 영향을 비교 분석 하였다. 방법: 안질환이 없는 성인 20명을 대상으로 원거리 대비감도 검사를 실시하였고 5단계의 공간 주파수를 갖는 F.A.C.T.(Stereo Optical, USA)를 이용하였다. 우안, 좌안, 양안 순서로 프리폼 누진렌즈와 일반누진렌즈 대비감도를 측정하였다. 결과: 우안/좌안/양안 대비감도 검사 값이 A(1.5 cpd) 공간주파수에서는 일반 누진렌즈에 비교하여 프리폼 누진렌즈가 16%/17%/11%, B(3 cpd) 공간주파수에서는 11%/5%/5%, C(6 cpd) 공간주파수에서는 6%/6%/9%, D(12 cpd) 공간주파수에서는 19%/16%/13%, E(18 cpd) 공간주파수에서는 4%/3%/18% 높았다. 결론: 원거리 대비감도의 모든 공간주파수 영역에서 프리폼 누진렌즈가 일반 누진렌즈보다 측정값이 높게 측정되었다.

• Earthquakes and Structures
• /
• 제12권5호
• /
• pp.529-541
• /
• 2017

According to the definition, progressive collapse could occur due to the initial partial failure of the structural members which by spreading to the adjacent members, could result in partial or overall collapse of the structure. Up to now, most researchers have investigated the progressive collapse due to explosion, fire or impact loads. But new research has shown that the seismic load could also be a factor for initiation of the progressive collapse. In this research, the progressive collapse capacity for the 5 and 15-story steel special moment resisting frames using push-down nonlinear static analysis, and nonlinear dynamic analysis under the gravity loads specified in the GSA Guidelines, were studied. After identifying the critical members, in order to investigate the seismic progressive collapse, the 5-story steel special moment resisting frame was analyzed by the nonlinear time history analysis under the effect of earthquakes with different characteristics. In order to account for the initial damage, one of the critical columns was weakened at the initiation of the earthquake or its Peak Ground Acceleration (PGA). The results of progressive collapse analyses showed that the potential of progressive collapse is considerably dependent upon location of the removed column and the number of stories, also the results of seismic progressive collapse showed that the dynamic response of column removal under the seismic load is completely dependent on earthquake characteristics like Arias intensity, PGA and earthquake frequency contents.

• 한국생산제조학회지
• /
• 제19권3호
• /
• pp.407-413
• /
• 2010

This paper reports on the research which analyzes acoustic signals acquired in progressive compressing, hole blanking, and burr compacting process. An acoustic sensor was set on the bed of hydraulic press. Acoustic signal is generated from progressive stamping process. First the signal acquired from the unit process; compressing, blanking or compacting, is studied by Fourier Transform and Short Time Fourier Transform. The blanking process emitted ultrasonic signal with more than 20kHz, but the compressing and compacting processes emitted acoustic signals with lower than 10kHz. The combined signals periodically acquired right after the tool grinding were then analyzed. 70-80kHz signals appeared in time-frequency domain, but not in the frequency domain, the magnitude of which was related to the tool wear. Short Time Fourier Transform made up for the Fourier Transform in analyzing the emitted signal for stamping process in the ultrasonic domain.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.151-158
• /
• 2005

In the semiconductor and the optical industry, a new transport system which can replace the conventional sliding systems is required. The sliding systems are driven by the magnetic field and conveyer belts. The magnetic field nay damage semiconductor and the contact force may scratch the optical lens. The ultrasonic wave driven system can solve these problems. In this paper, an object transport system using the excitation of ultrasonic wave is proposed. The experiments for finding the optimal progressive frequency and the phase-differences between two ultrasonic wave generators are performed. The relationships between transportation speed and the excitation frequency, flexural beam shapes and amplification voltage are investigated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.696-699
• /
• 2003

In the semiconductor and the optical industry a new transport system which can replace the conventional sliding system is required. There systems are driven by magnetic field and conveyer belt. The magnetic field damages semiconductor and contact force scratches the optical lens. The ultrasonic wave driven system can solve these problem. In this paper, the object transport system using the excitation of ultrasonic wave is proposed. The experiments for finding the optimal excitation frequency, finding phase-difference between two ultrasonic wave generators are performed. The relationship of transporting speed according to the change of flexural beam shape is verified and the system performance for practical use is evaluated.

• The Journal of Korean Physical Therapy
• /
• 제20권1호
• /
• pp.11-16
• /
• 2008

Purpose: This study was undertaken to compare the signal characteristics of surface electromyography (EMG) between progressive resistive increase exercise (PRIE) and progressive resistive decrease exercise (PRDE). Methods: Forty healthy male subjects were randomly assigned to either the PRIE group or the PRDE group. Subjects participated in the PRIE and PRDE methods, with 10 RM for each subject. EMG activity was recorded from the rectus femoris muscle. Outcome data were collected for both groups pre-exercise, immediately post-exercise, then at 5 and 10 minutes post-exercise. Repeated measures 2-way ANOVA was used to determine the statistical difference of the root mean square (RMS) in EMG activity. Results: We showed that RMS values, when compared with pre-exercise, were decreased immediately after exercise and were increased at 5 and 10 minutes after exercise (p<0.05). The RMS values were not significantly different between the two groups (p>0.05). Conclusion: These results can indicate that both the PRIE and PRDE protocols will be improve strength with equivalent efficacy. Further studies are needed to address exercise duration, frequency of exercise sessions, and rest times than the PRIE and PRDE protocols with regard to the changes in strength improvement without a large amount of muscle fatigue.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.390-396
• /
• 2010

An 80MHz surface acoustic wave (SAW)-based gyroscope utilizing a progressive wave was developed on a piezoelectric substrate. The developed sensor consists of two SAW oscillators in which one is used for sensing element and has metallic dots in the cavity between input and output IDTs. The other is used for a reference element. Coupling of mode (COM) modeling was conducted to determine the optimal device parameters prior to fabrication. According to the simulation results, the device was fabricated and then measured on a rate table. When the device was subjected to an angular rotation, oscillation frequency differences between the two oscillators were observed because of the Coriolis force acting on the metallic dots. Depending on the angular rate, the difference of the oscillation frequency was modulated. The obtained sensitivity was approximately 52.35 Hz/deg.s within the angular rate range of 0~1000 deg/s. The performances of devices with three IDT structures for two kinds of piezoelectric substrates were characterized. Good thermal stability was also observed during the evaluation process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.256-256
• /
• 2003

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.267-267
• /
• 2003

• Communications for Statistical Applications and Methods
• /
• 제29권2호
• /
• pp.225-238
• /
• 2022

In this paper, we propose a clustering method for advanced metering infrastructure (AMI) data in Korea. As AMI data presents non-stationarity, we consider time-dependent frequency domain principal components analysis, which is a proper method for locally stationary time series data. We develop a new clustering method based on time-varying eigenvectors, and our method provides a meaningful result that is different from the clustering results obtained by employing conventional methods, such as K-means and K-centres functional clustering. Simulation study demonstrates the superiority of the proposed approach. We further apply the clustering results to the evaluation of the electricity price system in South Korea, and validate the reform of the progressive electricity tariff system.