• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.250-253
• /
• 2005

A Programmable Automation Controller (PAC) has been developed by Turbotek Co., Ltd. The developed system has multi-domain functionality-including sequence control, motion control and HMI- on a single platform. The PAC also has a common development platform for the design and integration of multi-domain automated systems. Since hardware of the developed system has modular architectures, performance and specification of the controller are determined by combination of specific modules. The developed system employs de facto standards such as OPC interface that allow users to easily exchange data as part of networked multi-vendor systems.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.7
• /
• pp.1019-1023
• /
• 2014

The issue of safety insurance in PES(Programmable Electronic Systems) has been provoked because PES is difficult to define failure modes which are appeared in many different ways. But the PES applications extend rapidly in various areas. One of the solutions for PES safety insurance is voting which PES is used by comparing the outputs of several PES. The time synchronization of the PES is necessary for this reliable voting. The voting must be carried out with the outputs from same time inputs. There are several methods for time synchronization of the PES. In this paper, we discussed two modes of the time synchronization which are mutual synchronization of several PES and using UTC(Universal Time Clock).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.9
• /
• pp.39-46
• /
• 2007

This paper presents a programmable single-phase ac power source that provides a sinusoidal output voltage with an adjustable output amplitude and frequency over a wide range as well as an arbitrary waveform. The ac power source under consideration have a linear power amplifier. The desired output values can be programmed with a personal computer. The power source operates at 220[V]/60[Hz] mains and the output voltage is isolated from the input circuit. The system consists mainly of a power converter to generate and amplify the waveform signal, a controller to control the desired output signal and measure the output parameters, and a control program to set the desired output and display the values. The prototype ac power source was constructed and tested with the results demonstrating a good performance.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.644-646
• /
• 2000

According to the deregulations of governments in the world. the power industries of United State and European nations are proceeding remote meter reading and remote load control. But the core technology of multifunctional electronic meter implemented by programmable one-chip IC, which can be the right answer of all the power industy's efforts is now still under development in the advanced countries. Implementation of smallest size, lowest price single-phase meter with features which enable distribution automation such as bidirectional communication, Remote load control, remote meter reading, remote credit assigment. Prepayment billing system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1384-1387
• /
• 1996

SCPI(Standard Commands for Programmable Instrument) is a standard command sets designed for controlling various types of instruments. In order to control FFT(Fast Fourier Transform) analyzing device using SCPI it is required to support sweep measurement function. We defined SCPI command set for FFT analysis and developed parser of defined command set using lex(Lexical Analyzer Generator) and yacc(Yet Another Compiler Compiler). After developing FFT analyzing test was performed with that parser. Up to audible signal frequency the result of FFT analysis was accurate and that result was agree with that of conventional FFT analyzer. As a result it is proved that various types of instruments including sweep measurement instrument can be controlled with appropriate SCPI command sets. Also when developing new instruments the method used in this experiment will contribute to reducing the time required to develop the SCPI parser and increasing reliability.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.5
• /
• pp.682-686
• /
• 2016

A fully differential RC calibrator for accurate cut-off frequency of a programmable channel selection filter is proposed. The proposed RC calibrator consists of an RC timer, clock generator, synchronous counter, digital comparator, and control block. To verify the proposed RC calibrator, a six-order Chebyshev programmable low-pass filter with adjustable 3 dB cut-off frequency, which is controlled by the proposed RC calibrator, was implemented in a $0.18-{\mu}m$ CMOS technology. The channel selection filter with the proposed RC calibrator draws 1.8 mA from a 1.8 V supply voltage and the measured 3 dB cut-off frequencies of the channel selection LPF is controlled accurately by the RC calibrator.

• Journal of Power Electronics
• /
• v.10 no.3
• /
• pp.228-234
• /
• 2010

This paper investigates the conducted-noise characteristics of a digitally-controlled randomly-switched dc-dc converter. In order to investigate the effect of the suggested digital controller on the conducted-noise characteristics of a dc-dc converter, three factors have been studied: the field-programmable gate array (FPGA) clock speed, the randomization ratio percentage, and the effect of using a closed loop feedback controller. A field-programmable gate array is much more flexible than analog control circuits, has a lower cost, and can be used for power supply applications. A novel FPGA-based implementation has been suggested for obtaining the experimental validations and realizing the studied concepts. Furthermore, the experimental results have been discussed and design guidelines have been included.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.86-87
• /
• 2008

In this study, we studied the nature of thin films formed by photodoping chalcogenide materials with for use in programmable metallization cell devices, a type of ReRAM. We investigated the resistance of Ag-doped chalcogenide thin films varied in the applied voltage bias direction from about 1 M$\Omega$ to several hundreds of $\Omega$. As a result of these resistance change effects, it was found that these effects agreed with PMC-RAM. The results imply that a Ag-rich phase separates owing to the reaction of Ag with free atoms from the chalcogenide materials.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.8
• /
• pp.1580-1584
• /
• 2009

We have theoretically analyzed the monolithic integration of vertical cavity lasers with depleted optical thyristor (VCL-DOT) structure and experimentally demonstrated optical logic gates such as AND-gate, OR-gate, and INVERTER implemented by VCL-DOT for an optical programmable gate array. The optical AND and OR gates have been realized by changing a input bias of the single VCL-DOTs and all kinds of optical logic functions are also implemented by adjusting an intensity of the reference input beams into the differential VCL-DOTs. To achieve the high sensitivity, high slope efficiency and low threshold current, a small active region of lasing part and a wide detecting area are simultaneously designed by using a selective oxidation process. The fabricated devices clearly show nonlinear s-shaped current-voltage characteristics and lasing characteristics of a low threshold current with 0.65 mA and output spectrum at 854 nm.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.208-211
• /
• 2000

This paper describes the design of a CMOS frequency synthesizer using programmable frequency divider with novel architecture. A novel architecture of programmable divider can be producted all of integer-N and fabricated by 0.65$\mu\textrm{m}$ 2-poly, 2-metal CMOS technology. Frequency synthesizer is simulated by 0.25$\mu\textrm{m}$ 2-poly, 5-metal CMOS technology. This circuit has settling time of 1.5${\mu}\textrm{s}$ and power consumption of 70㎽. Operating frequency of the frequency synthesizer is 820MHz∼l㎓ with a 2.5V supply voltage.