• International Journal of Highway Engineering
• /
• v.18 no.2
• /
• pp.11-18
• /
• 2016

PURPOSES: This paper investigates behavior and performance of concrete pavement in tunnel based on temperature data from field. METHODS : In this study, there are 4 contents to evaluate concrete pavement in tunnel, First, Comparison for distress was conducted at outside, transition, and inside part of tunnel. Secondly, temperature data was collected in air and inside concrete pavement in outside and inside tunnel. Thirdly, FEM analysis was performed to evaluate stress condition, based on temperature data from field. Finally, performance prediction was done with KPRP program. RESULTS: From the distress evaluation, failure of inside tunnel was much less than it of outside tunnel, Temperature change in tunnel was less than out side, and also it was more stable. According to result of FEM analysis, both curling stress status of inside tunnel was lower than it of outside tunnel. Based on KPRP program analysis, performance of inside tunnel was longer than outside. CONCLUSIONS : Through all study about behavior and performance of concrete pavement in tunnel, condition in tunnel has more advantages from environmental and distress point of view. Therefore, performance of inside tunnel was better than outside.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.8
• /
• pp.836-844
• /
• 1991

PLC(programmable logic controller) system is widely used for the control of factory. PLC system receives ladder diagram which is drawn by the user to implement hardware logic, converts the ladder diagram into sequence program which is executable in the PLC system, and executes the sequence program indefinitely unless user breaks. The sequence program processes the data of on/off signal, and endures 1 scan delay and missing of pulse-type signal shorter than a scan time. So, data dependency doesn't exist. By applying theis characteristics to multiprocessor architecture, we design parellel PLC functionally and evaluate performance upgrade. Parallel PLC consists of central processing module, N general processing unit, and a shared memory by master-slave type. Each module executes allocated sequence program by the control of central processing module. We can expect performance upgrade by parallel processing, and reliability by relocation of sequence program when error occurs in processing module.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.3
• /
• pp.220-225
• /
• 2004

This paper presents a program for the automatic alignment of optical axes and evaluation of the optical filter performance which is a key technologies for the production of optical module. Recently the production of optical filter module mostly depends upon handwork or semi-automation. Moreover, they have used an expensive spectrum analyzer. In this work, we have developed an automatic alignment and evaluation program of optical filter module using photo detector and developed program for automation and cost reduction of the production of optical titter module.

• The Journal of Korean Physical Therapy
• /
• v.13 no.3
• /
• pp.701-710
• /
• 2001

The purpose of study was to compare the effect of balance performance in the Down syndrome child by the Sensorimotor program. Twenty-four aged 8 to 16 years participated in this study. Participants were divided into experimental(12) and control group(12). Experimental group were received sensorimotor program in three times a week for 6 weeks. But control group were not participants this program. All subjects were assessmented to clinical test such as Oseretsky and Berg balance test. Experimental and control subjects were tested before, after and end(after summer vacation)of the trial. The results were as follow; 1. The physique of Down syndrome child is more dropped than normal child. 2. Balance of Down syndrome child prior to test is clearly dropped. but effect of Sensorimotor program is appeared in experimental group. 3. Balance of experimental group is more decreased than prior to during the summer vacation.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.6
• /
• pp.64-69
• /
• 2008

In this study the thermal performance and economic analysis program of solar heating system for district heating was developed. This program, named SOLAN-DHS and based on TRNSYS, consisted of four modules like as user's interface for system input/output, library, and utilities and a calculating engine. SOLAN-DHS simplifies user's input data through the database of most system engineering data including weather data of 17 areas in Korea. Five different types of solar systems which can be applicable to district heating system were presented in this program. Due to the user-friendly layout, all design parameters can be changed quickly and easily for the influence on system efficiency. The reliability of SOLAN-DHS was finally verified by the experiments.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.2
• /
• pp.170-180
• /
• 2000

The equation which is related to TXV performance was investigated. On the basis of this equation, the TXV simulation program was developed. Results of the developed TXV simulation program were proven by the experiment on the influence of pressure difference between TXV entrance and exit and equalizing pressure. Simulation results show very good agreement with experimental results, the RMS error between them was 1.83%. The capillary tube simulation program was made by the basic equation of fluid dynamics. Results of this program were proven by data which were experimented previously. The RMS error between simulation results and experimental results was 4.13% .

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.56.1-56.1
• /
• 2018

Astronomy education and research can benefit from a high performance telescope that is easily accessible in campus. Such a facility allows hands-on education of observations, small research projects, test of new instruments, and time-domian study of astronomical phenomena. Recently, SNU reconstructed a 40-year old observatory (also known as 구천문대), and established the new SNU Astronomical Observatory (SAO) on that site. On 2018 March 27, the 1-m optical telescope was successfully installed at SAO. Since then, this telescope has been producing wonderful images, with the best seeing value recorded being as small as 0.85 arcsec. This poster will give an overview of the 1-m telescope, and its performance based on test observations during the 2018A semester.

• Child Health Nursing Research
• /
• v.28 no.3
• /
• pp.167-175
• /
• 2022

Purpose: The present study aimed to develop and examine the effectiveness of a pediatric nursing competency-building program for nursing students. Methods: This was a quasi-experimental study with a nonequivalent control group pretest-posttest design conducted between October and December 2021. The participants included 40 nursing students (20 each in the experimental and control groups) at a university in a South Korean city. The pediatric nursing competency-building program integrated problem-based learning and simulation into clinical field practice. The experimental group participated in the program, while the control group did not. Data were analyzed using the 𝑥² test, the independent t-test, and repeated-measures analysis of variance. Results: Pediatric nursing competency and clinical performance showed a greater increase in the experimental group than in the control group. However, the change in problem-solving ability in the experimental group was not significantly different from that in the control group. Conclusion: The pediatric nursing competency-building program effectively improved students' pediatric nursing competency and clinical performance.

• Journal of Preventive Medicine and Public Health
• /
• v.11 no.1
• /
• pp.24-30
• /
• 1978

This study was designed to analyse effects of Family Health Workers' activities on the performance of a child immunization program as part of the evaluative research in the community health demonstration project in Kang Wha. Frequent shortcomings of evaluative research are problems in setting evaluative indices, difficulties in interpreting influences of socioeconomic changes due to lack of control and failure of demonstrating association between activity input and program performance. Specific objectives of this study was to improve the frequent shortcoming of evaluative research by isolating the effects of Family Health Workers' activities on the performance of the program through controlling other variables which also influenced the program performance. The target population consisted of 1240 children who were born between Jan. 1971 and Dec. 1975 in Sunwon Myun, and Naega Myun in Kwang Wha Gun, Kyonggi Province. The data were collected in part through 20 Family Health Workers who interviewed the mothers of these children in their villages during Nov. 1977. Part of the data were obtained by summarizing Family Health Workers daily activity records. All data were grouped for each birth cohort according to the 20 villages. Dependent variable of the model is the measle immuinization rate of each village and the independent variables are characteristics of baby, mother, household, travel time to the health subcenter, to Kang Wha Town, and the mean member of visits to the household by Family Health Workers as well as their other related activities and the year of birth of children according to village. The model was analysed by stepwise multiple regression technique. The summarized results show that overall $R^2$ were 39.3% and mean number of Family Health Worker household visits, mean age of mother and mean economic status were significant variables in explaining the immunization rate. Therefore Family Health Workers' activities are one of the significant variables in influencing the increased immunization rate of children in villages of the project area.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.60-68
• /
• 2003

In this study, a steady state performance analysis program was developed for a turbofan engine, and its performance was analyzed at installed conditions. For the purpose of evaluation, the developed program was compared with the performance data provided by the engine manufacturer. It was confirmed that the developed program was reliable because the results by the developed program were well agreed with those by the engine manufacturer within 3.5%. The non-linear GPA(Gas Path Analysis) program for performance diagnostics were developed, and selection of optimal measurement variables was studied. Furthermore, in order to investigate effects of the number and the kind of measurement variables, the non-linear GPA was analyzed with various measurement sets. Finally, the measurement parameters selected in the previous step were applied to the fault detection analysis of the 2-spool separate flow type turbofan engine.