• Journal of the Korean earth science society
• /
• v.36 no.1
• /
• pp.36-50
• /
• 2015

The purpose of this study is to assign emission source profiles of volatile organic compounds (VOCs) and particulate matters (PMs) for chemical speciation, and to correct the temporal allocation factor and the chemical speciation of source profiles according to the source classification code within the sparse matrix operator kernel emission system (SMOKE) in the Seoul metropolitan area. The chemical speciation from the source profiles of VOCs such as gasoline, diesel vapor, coating, dry cleaning and LPG include 12 and 34 species for the carbon bond IV (CBIV) chemical mechanism and the statewide air pollution research center 99 (SAPRC99) chemical mechanism, respectively. Also, the chemical speciation of PM2.5 such as soil, road dust, gasoline and diesel vehicles, industrial source, municipal incinerator, coal fired, power plant, biomass burning and marine was allocated to 5 species of fine PM, organic carbon, elementary carbon, $NO_3{^-}$, and $SO_4{^2-}$. In addition, temporal profiles for point and line sources were obtained by using the stack telemetry system (TMS) and hourly traffic flows in the Seoul metropolitan area for 2007. In particular, the temporal allocation factor for the ozone modeling at point sources was estimated based on $NO_X$ emission inventories of the stack TMS data.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.191-197
• /
• 2012

Esthetics is important in restoring maxillary anterior area. Alveolar bone resorption and loss of interdental papilla may be minimized by immediate implantation. Previous studies showed successful results with the immediate implantation in healthy extraction socket, while many of these studies objected the immediate implantation into extraction sites with periapical lesions. Recent studies, however, reported successful results of the immediate implantation into extraction sites with periapical lesions with careful debridement of extraction sockets and general medication of antibiotics prior to implantation. A 73-year-old female visited the department of Prosthodontics in ${\bigcirc}{\bigcirc}$ University Dental Hospital with the chief complaint of fallen post-core and crown on left maxillary incisor. Although the incisor was with vertical root fracture and periapical lesion, the immediate implantation following the extraction of tooth was planned. Thorough socket debridement, irrigation with chlorhexidine, and tetracycline soaking were followed by immediate implantation. The general medication of antibiotics (Moxicle Tab.$^{(R)}$, 375 mg) was prescribed before and after the surgery. Immediate provisional restoration was delivered two days after the surgery, and the definitive metal-ceramic restoration was placed about six months later after reproducing the emergence profile from the provisional restoration. This case presents satisfying result esthetically and functionally upto two years after the placement of prosthesis with the harmonious gingival line and no loss of marginal bone.

• The Journal of Pediatrics of Korean Medicine
• /
• v.16 no.1
• /
• pp.39-74
• /
• 2002

Recently, increased attention has been paid to the growth of the height of children and adolescents. To accelerate growth, velvet antlers are typically used in Oriental medicine. The present study investigated the effects of velvet antlers of velvet antlers on bone growth using the cell line of Human Osteosarcoma (Hos), derived from the bone-generating cells essential to bone growth. In order to give certain stress to this Hos, the medium contained 1% FBS was used for culturing for Hos cell instead of 10% in control. In this condition of which the proliferation had been significantly decreased, the ethanol extract of upper part of velvet antlers was added, As a result, the cells proliferation rate was significantly increased. Using Oligonucleotide DNA microarray, comparison and analyses were done to see what kind of specific genes would be differentially expressed. The result showed that as opposed to the control group, the stressed group indicated a decrease in the expressions of 6 kinds of genes such as, Id1, retinoid X receptor(RXRB) and 14-3-3 epsilon, etc. The velvet antler treated group, as opposed to the control group, showed a decreased in the expressions of 8 kinds of genes such as Id1, etc. and an increase in the expressions of 24 kinds of genes. The number of genes that showed differences in the velvet antler treated group compared with the stressed group was 7 the expression of 1 kind of gene was decreased, and the expressions of 6 kinds of genes were increased. Considering the mechanism by which velvet antlers affected the growth of osteoblast through reviewing the functions of these genes, the following results were attained. The constraint in the proliferation of Hos cells resulting from the medium contained 1% FBS seems to be caused by three important factors: 1) the decrease of the expression of 14-3-3 epsilon involved in the signal transduction and metabolism of growth, 2) the decrease of the expression of Id1 gene involved in the metabolism of bone formation, and 3) the decreased of expression of RXRB gene involved in the metabolism of retinoci acid. It is suggested that the improvement of the cell proliferating effects by velvet antler treatment, in stressed condition si mediated by increment of 6 genes particularly 14-3-3 epsilon, RXRB, and IGF2, with are the crucial factors for the cell growth and differentiation, metabolism of retinoic acid and osteoblast proliferation, respectively.

• Food Science of Animal Resources
• /
• v.30 no.4
• /
• pp.609-616
• /
• 2010

This study was conducted to determine the effects of dietary low grade soybean, fermented with Aspergillus oryzae (FSB 1) or Bacillus subtilis var. natto (FSB 2), on egg production and quality, fat and cholesterol content, and the fatty acid (FA) profile of eggs by lipid layer. A total of 18 Hi-Line strain layers, 22 wk of age, were randomly assigned to three dietary treatments: no fermented soybean (control), control with 15% FSB 1 (C + FSB 1), and control with 15% FSB 2 (C + FSB 2). The rate of egg production and egg weight were evaluated between two periods: one was from the 1st to 4th wk and the other was from the 5th to 8th wk. At the 8th wk, a total of 30 eggs were randomly selected from each treatment group and analyzed for physical quality, fat content, fatty acid composition and cholesterol content. The results showed that egg production was increased in hens fed with diets containing fermented soybeans from the 5th to 8th wk period (p<0.01). A similar tendency was observed through eight weeks' cumulative egg production (p<0.05). There were no significant differences in egg production between the C + FSB 1 and C + FSB 2 treatment groups (p>0.05). Egg weight and other physical properties did not vary between treatment groups (p>0.05). Egg yolks among different treatment groups were similar in fat content, but egg yolks in the C + FSB 1 and C + FSB 2 groups had lower oleic acid (p<0.05), higher linoleic, ${\alpha}$-linolenic, and arachidonic acids (p<0.01), and lower cholesterol content (p<0.05) than those in the control group. In conclusion, supplementation of fermented low grade soybeans might be useful as a functional feedstuff to improve egg production and quality for a healthy human diet.

• Journal of Navigation and Port Research
• /
• v.26 no.4
• /
• pp.473-479
• /
• 2002

The estimation of the volume of a pit excavation is often required in many surveying, soil mechanics, highway applications and transportation engineering situations. The calculation of earthwork plays a major role in plan or design of many civil engineering projects such as seashore reclamation, and thus it has become very important to improve the accuracy of earthwork calculation. In this paper the spot height method, proposed formulas(A, B, C), and chen and Line method are compared with the volumes of the pits in these examples. And we proposed an algorithm of finding a terrain surface with the free boundary conditions and both direction spline method drawback, i.e., the modeling curves form peak points at the joints. To avoid this drawback, the cubic spline polynomial was chosen as the methematical model of the new method. From the characteristics of the cubic spline polynomial, the modeling curve of the new method was smooth and matched the ground profile well. As a result of this study, algorithm of proposed three methods to estimate pit excavation volume provided a better accuracy than spot height, chamber, chen and Lin method. And the mathematical model mentioned makes is thought to give a maximum acccuracy in estimating the volume of a pit excavation.

• Radiation Oncology Journal
• /
• v.11 no.2
• /
• pp.421-430
• /
• 1993

The calculation of dose distribution in multiple arc stereotactic radiotherapy is a three-dimensional problem and, therefore, the three-dimensional dose calculation algorithm is important and the algorithm's accuracy and reliability should be confirmed experimentally. The aim of this study is to verify the dose distribution of stereotactic radiosurgery experimentally and to investigate the effect of the beam quality, the number of arcs of radiation, and the tertiary collimation on the resulting dose distribution. Film dosimetry with phantom measurements was done to get the three-dimensional orthogonal isodose distribution. All experiments were carried out with a 6 MV X-ray, except for the study of the effects of beam energy on dose distribution, which was done for X-ray energies of 6 and 15 MV. The irradiation technique was from 4 to 11 arcs at intervals of from 15 to 45 degrees between each arc with various field sizes with additional circular collimator. The dose distributions of square field with linear accelerator collimator compared with the dose distributions obtained using circular field with tertiary collimator. The parameters used for comparing the results were the shape of the isodose curve, dose fall-offs fom $90\%$ to $50\%$ and from $90\%\;to\;20\%$ isodose line for the steepest and shallowest profile, and $A=\frac{90\%\;isodose\;area}{50\%\;isodose\;area-90\%\;isodose\;area}$(modified from Chierego). This ratio may be considered as being proportional to the sparing of normal tissue around the target volume. The effect of beam energy in 6 and 15 MV X-ray indicated that the shapes of isodose curves were the same. The value of ratio A and the steepest and shallowest dose fall-offs for 6 MV X-ray was minimally better than that for 15 MV X-ray. These data illustrated that an increase in the dimensions of the field from 10 to 28 mm in diameter did not significantly change the isodose distribution. There was no significant difference in dose gradient and the shape of isodose curve regardless of the number of arcs for field sizes of 10, 21, and 32 mm in diameter. The shape of isodose curves was more circular in circular field and square in square field. And the dose gradient for the circular field was slightly better than that for the square field.

• Journal of Mushroom
• /
• v.12 no.1
• /
• pp.58-62
• /
• 2014

To develop a new cultivar of King oyster mushroom white variety (Pleurotus ferulae), GW10-68 as parental strain was selected by the method of Di-mon crossing between monokaryotic strain ASI 2798-24 derived from ASI 2798 and dikaryotic strain ASI 2803. The GW10-95(ASI 2803 ${\times}$ ASI 2798-24) was shown the best cultural characteristics, selected to be a new cultivar and designed as 'Beesan No.2'. The 'Beesan No.2' was formed incompatibility line distinctly in the confrontation growth of parental strains ASI 2803, ASI 2798 and Beesan No.1. Analysis of the genetic characteristics of the new cultivar 'Beesan No.2' showed a different DNA profile as that of the control strains, ASI 2803, ASI 2798 and 'Beesan No.1', when RAPD(Random Amplified Polymorphic DNA) primer URP4 was used. The optimum temperature and pH arrange for mycelial growth were $25^{\circ}C$ and pH5~8, respectively. Fruiting body production per bottle was about 123.3 g. And also the stipe was long. This new cultivar 'Beesan No.2' of Pleurotus ferulae was characterized white-like variety of King oyster mushroom in the color of stipe, that was long and low yield compared to that of other cultuvar 'Beesan No.1'. We therefore expect that this new strain will increase of export and substitute cultivar of King oyster mushroom.

• Journal of Mushroom
• /
• v.12 no.1
• /
• pp.52-57
• /
• 2014

To develop a new cultivar of King oyster mushroom white variety (Pleurotus ferulae), GW10-95 as parental strain was selected by the method of Di-mon crossing between monokaryotic strain ASI 2850-24 derived from ASI 2850 and dikaryotic strain ASI 2803. The GW10-95(ASI 2803 ${\times}$ ASI 2850-24) was shown the best cultural characteristics, selected to be a new cultivar and designed as 'Beesan No.1'. The 'Beesan No.1' was formed incompatibility line distinctly in the confrontation growth of parental strains ASI 2803 and ASI 2850. Analysis of the genetic characteristics of the new cultivar 'Beesan No.1' showed a different DNA profile as that of the control strains, ASI 2803 and ASI 2850, when RAPD(Random Amplified Polymorphic DNA) primer URP6 was used. The optimum temperature and pH arrange for mycelial growth were $25^{\circ}C$ and pH5~8, respectively. Fruiting body production per bottle was about 245 g using demonstration farms. And also the stipe was thick and long. This new cultivar 'Beesan No.1' of Pleurotus ferulae was characterized by fast fruitbody formation, the stipe was thick and long and high quality yield compared to that of other cultuvars. We therefore expect that this new strain will increase of farmer's income by construction of stabilized production system.

• Journal of Mushroom
• /
• v.11 no.2
• /
• pp.77-81
• /
• 2013

To develop a new cultivar of king oyster mushroom(Pleurotus eryngii), G09-21 as parental strain was selected by the method of Di-mon crossing between monokaryotic strain ASI 2824-21 derived from ASI 2824(Keunneutari No. 2) and dikaryotic strain ASI 2887(Aeryni 3). The Pe21-53(G09-21-10 x ASI 2844-9) was shown the best cultural characteristics, selected to be a new cultivar and designated as 'Seolsong'. The 'Seolsong' was distinctly formed incompatibility line in the confrontation growth of parental strains Keunneutari No. 2, Aeryni 3 and ASI 2844. Analysis of the genetic characteristics of the new cultivar 'Seolsong' showed a different DNA profile as that of the control strains, Keunneutari No. 2, Aeryni 3 and ASI 2844, when RAPD(Random Amplified Polymorphic DNA) primer URP4 was used. The optimum temperature and pH arrange for mycelial growth were $25{\sim}30^{\circ}C$ and pH 5~8, respectively. This new cultivar 'Seolsong' of fruiting body production per bottle was about $131.4{{\pm}}43.1$ g which is about 102% quantity compared to that of other cultivar Keunneutari No. 2. And also the stipe is thick and long, but the number of available stipe is few. Particularly, it was tolerant of high moisture above 90% during the growth period after primodia formation. We therefore expect that this new strain will save of labor and cost of cultivation by without culling work.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.39-45
• /
• 2012

Three-dimensional integrated circuit(3D IC) technology has become increasingly important due to the demand for high system performance and functionality. In this work, BOE and HF wet etching of Cu line surfaces after CMP were conducted for Cu-Cu pattern direct bonding. Step height of Cu and $SiO_2$ as well as Cu dishing after Cu CMP were analyzed by the 3D-Profiler. Step height increased and Cu dishing decreased with increasing BOE and HF wet etching times. XPS analysis of Cu surface revealed that Cu surface oxide layer was partially removed by BOE and HF wet etching treatment. BOE treatment showed not only the effective $SiO_2$ etching but also reduced dishing and Cu surface oxide rather than HF treatment, which can be used as an meaningful process data for reliable Cu-Cu pattern bonding characteristics.