• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.257-258
• /
• 2010

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.413-422
• /
• 2000

Samples of banana were dried in a two-stage heat pump dryer capable of producing stepwise control of the inlet drying air temperature while keeping absolute humidity constant. Two stepwise air temperature profiles were tested. The incremental temperature step change in temperature of the drying air about the mean air temperature of 30 $^{\circ}C$ was 5 $^{\circ}C$. The total drying time for each temperature-time profile was about 300 minutes. The drying kinetics and color change of the products dried under these stepwise variation of the inlet air temperature were measured and compared with constant air temperature drying. The stepwise air temperature variation was found to yield better quality product in terms of color of the dried product. Further, it was found that by employing a step-down temperature profile, it was possible to reduce the drying time to reach the desired moisture content.

• 한국축산식품학회지
• /
• 제41권4호
• /
• pp.739-747
• /
• 2021

This study examined the measurement conditions of the texture profile analysis (TPA) experiments that are typically used to measure the physical properties of sausage. As the measurement conditions (compression ratio and cross-head speed) were changed, the significant differences between the values of textural parameters (hardness, adhesiveness, springiness, cohesiveness, chewiness) of samples changed. Furthermore, among the measurement conditions, there was more variation in the significant difference between the value of samples due to a change in the compression ratio than due to a change in the cross-head speed. The highest variation in significant difference was observed between the values of cohesiveness of samples due to changes in measurement conditions, whereas the lowest variation in significant difference was observed between the values of springiness of samples due to change in measurement conditions. Therefore, it is desirable to provide a clear basis for setting specific measurement conditions for TPA test, since significant differences in the values of textural parameters of samples were caused by differences in cross-head speed or compression ratio, not by a difference in samples, when analyzing the cohesiveness of sausage, especially.

• 천문학회보
• /
• 제39권1호
• /
• pp.38.2-38.2
• /
• 2014

Radial light profiles of bars are known to be related to the morphology of their host galaxies in a way that bars in early type disk galaxies show flat radial light profile, while bars in late type disk galaxies show exponential profile. To quantify how flat or steep bar profiles are, we have performed detailed two-dimensional decompositions on 3.6 micron images for 144 barred galaxies from the Spitzer Survey of Stellar Structure in Galaxies (S4G), and then modeled bar profiles with Sersic functions. We find that bars in classical bulge, higher bulge-to-total (B/T) galaxies are flatter than bars in bulgeless, lower B/T galaxies. In particular, we find that the presence of a bulge almost always guarantees that the bar is flat. Conversely, bulgeless galaxies, mostly have bars with steep profiles. This implies that the light profile of bars may be a dynamical age indicator of bars. We also find that the shape of bars are boxy and do not change with B/T. This indicates that as galaxies evolve, bars change their light profile while keeping their outermost shape boxy.

• 치과방사선
• /
• 제20권1호
• /
• pp.71-78
• /
• 1990

저자는 Panelipse Ⅱ의 상층 및 상의 확대변화를 관찰하기 위하여 모형판에 금속구를 위치시켜 3가지 Profile Index에서 각기 20장씩 방사선사진을 촬영하여 관찰한 결과를 다음과 같이 요약할 수 있었다. Profile Index의 증가에 따른 Panelipse Ⅱ 방사선상의 상층에 있어 모양의 변화는 없었고, 폭은 더 넓어졌으며, 회전축중심에서 외측으로 상층은 이동하였다. 방사선상에서 수평 수직확대는 공히 Profile Index가 증가함에 따라 그 범위가 커졌으며 이는 수평확대에 있어 수직확대보다 현저하였다.

• 대한치과교정학회지
• /
• 제29권4호
• /
• pp.399-409
• /
• 1999

본 연구는 교정치료동안의 전치부 후방이동에 의한 하안면부 연조직 측모 변화를 평가하기 위하여 시행되었다. 치조성 양악전돌을 주소로 내원하여 상, 하악 제 1 소구치를 발거하고 전치부 후방이동을 시행한 31증례의 치료전후 측모두부X선규격사진을 이용하였으며 성장의 영향을 배제하기 위하여 17세 이상의 한국인 여성으로 대상을 제한하였다. 치료전후 각 계측치와 변화량을 이용하여 paired f-test와 상관분석 및 회귀분석을 시행한 결과 다음과 같은 결론을 얻었다. $\cdot$치아의 후방이동량과 연조직의 후방이동량의 비는, 상악 중절치 (UIS):상순 (LS)은 1.54:1, 하악 중절치 (LIS):하순 (Ll)은 0.92:1이며 각각의 상관계수는 각각 0.746과 0.584로 나타났다. $\cdot$치료동안 연조직 자체의 두께는 상순 (UIS-LS)에서만 증가가 있었고 나머지 부위에서는 약간의 감소가 있었다. $\cdot$치아 이동량과 연조직 이동량간의 상관분석에서 상순 (LS)은 상악 중절치 (UIS)와 하순(LI)은 B점과 가장 높은 상관관계를 보였다. $\cdot$치아이동에 따른 하안면부 연조직의 이동을 예측하기 위한 다중 회귀방정식을 구할 수 있었다.

• 한국유체기계학회 논문집
• /
• 제2권3호
• /
• pp.30-36
• /
• 1999

Blade shape profile in the axial compressor is one of the most important factors governing its aerodynamic characteristics. Manufacturing tolerance, which is inevitable in the blade manufacturing processes, may change blade profile and as a consequence, it will affect the compressor performance. In this paper, influence of manufacturing tolerance on the aerodynamic characteristics of axial compressor blades with distortion of blade profile curvatures is investigated by using a flow simulation technique. It is found that manufacturing tolerance can be an important factor affecting the source of both profile and wake losses of the axial compressor blades.

• Restorative Dentistry and Endodontics
• /
• 제36권1호
• /
• pp.59-65
• /
• 2011

연구목적: 본 연구의 목적은 서로 다른 기하학적 형태를 가진 3가지 Ni-Ti 파일, 즉 K3, NRT, Profle을 사용하여 레진 블록으로 제작된 만곡 근관에서의 apical transportation 양상 및 working length 변화를 서로 비교하는 것이다. 연구 재료 및 방법: 실험 방법은 30개의 레진 블록을 Schneider technque을 사용하여 만곡도 측정 후 각 group당 임의로 10개씩 배분하였다. 이를 각 Ni-Ti 파일을 사용하여 crown down technique으로 근관 성형하였다. 이의 분석을 위해 double radiograph superimposition method (Backman CA 1992)를 사용하고, 분석의 정확성과 일관성을 위해 특별히 고안된 jig, digital X-ray 및 apical transportation의 측정 시 CAD/CAM software를 이용하였다. Apical transportation 양은 '근단공-0.5 mm'부위로부터 0, 1, 3, 5 mm에서 측정 하였으며, working length 변화는 근관 성형 전후의 working length 변화를 측정하였다. 또 통계 처리는 각 group의 apical transportation 양과 working length 변화를 Kruskal-Wallis One Way Analysis로 분석 후 다중 비교는 Mann-Whitney U-test를 사용하였다. 결과: 각 group간 working lengh 변화 및 0, 1, 3 mm 부위에서의 apical transportation 측정 값 사이에는 유의할만한 차이가 관찰되지 않았으나(p = 0.924), 5 mm 부위에서는 K3와 Profile사이에 유의할 만한 차이가 있었다(p = 0.027). 결론: 서로 다른 기하학적인 형태를 가진 3가지 Ni-Ti 파일의 apical transportation 및 working length 변화 정도 평가시, 본 연구의 범위 내에서는 3가지 파일 모두 유의할 만한 차이를 보이지 않은 가운데 본래의 근관 형태를 잘 유지한다고 할 수 있다.

• 한국과학교육학회지
• /
• 제21권5호
• /
• pp.795-821
• /
• 2001

This Qualitative study investigated a preservice teacher's developing views of learning with the influence of constructivist epistemology taught in the Math, Science, and Technology Education (MSAT) Master of Education (M. Ed.) preservice teacher education program. The MSAT teacher education program employs constructivist aspects of teacher education and generates applications of constructivism to the practice of teaching, as revealed by faculty interview data. It is important at this point to emphasize that there are significant epistemological and ontological differences between different versions of educational constructivism (i.e., individual, radical, and social constructivism) and that these differences imply different pedagogical practices. For the 16 preservice teachers included in a larger study, the epistemological and ontological characteristics for each teacher's developing views of learning were identified through four in-depth interviews. Data from interviews were used to construct a constructivist profile for each preservice teacher's views of learning (i.e., a profile containing ontological beliefs, epistemological commitments, and pedagogical beliefs). Of the sixteen participants in the larger study, five significantly changed ontological and epistemological beliefs and eleven did not. Profile changes for the five who did change also resulted in changes in their conceptions of science teaching and learning (CSTL). In this article, one of the five teachers case was presented with rich quotes. This case study documents how a preservice teacher transferred his ontological and epistemological beliefs to his pedagogical beliefs and maintained the consistency between his philosophical beliefs and CSTL. It also demonstrated implications that changes in components for an educational constructivist profile have for a preservice teacher's view of himself as teacher. Data indicated the possibility that a constructivist-oriented preservice teacher education program can influence students' conceptions of science teaching and learning by explicitly introducing constructivism as an epistemology rather than as a specific method of instruction. Implications for both instructional practices of teacher education programmes and research are discussed.

• 비파괴검사학회지
• /
• 제31권6호
• /
• pp.656-664
• /
• 2011

In this work, a numerical model is proposed for the relation between the magnitudes and the depth residual stress with the velocity of Rayleigh wave. Three cases, stress-free, uniform stress and layered stress, are investigated for the change tendency of the Rayleigh wave speed. Using the simulated signal with variation of residual stress magnitude and depth, investigation of the parameters for fitting residual stress and velocity change are performed. The speed change of Rayleigh wave shows a linear relation with the magnitude and an exponential relation with the depth of residual stress. The combination of these two effects could be used for the depth profile evaluation of the residual stress.