• 한국지리정보학회지
• /
• 제20권1호
• /
• pp.42-55
• /
• 2017

식생의 기후 적응력은 지역에 따른 상황 및 공간적 패턴이 다르게 나타나기 때문에 픽셀 스케일의 접근이 필요하다. 본 연구에서는 위성영상 기반 식생지수에 대해 PLS 회귀분석을 적용하여 식생의 생산성에 영향을 미치는 기후요인을 평가하고 남한지역의 미래 산림 생산성을 예측하였다. 그 결과, 최고강수분기의 평균기온(Bio8), 최저강수분기의 평균기온(Bio9), 최저강수월의 강수량(Bio14) 변수가 식생의 생산성에 높은 영향을 미치는 것으로 분석되었다. 미래 기후시나리오 자료를 이용하여 예측된 2050년의 식생 생산성은 전체적으로 감소하는 것으로 나타났으며, 특히 고지대에서 크게 감소하는 것으로 분석되었다. 이러한 결과는 기후에 민감한 지역의 식생에 대한 생산성 모니터링과 미래 기후변화로 인한 산림 탄소 저장량의 변화를 평가하는데 있어 유용하게 활용될 수 있을 것으로 판단된다.

• 한국환경복원기술학회지
• /
• 제18권4호
• /
• pp.15-27
• /
• 2015

The objectives of this study are to analyze the quantitative ecological principal components of Korean Peninsula using the multivariate spatial environmental datasets and to compare the ecological difference between South and North Korea. Ecological maps with GIS(Geographical Information System) are constructed by PCA(Principal Component Analysis) based on seventeen raster(cell based) variables at 1km resolution. Ecological differences between South and North Korea are extracted by Factor Analysis using ecosystem maps masked from Korean ones. Spatial data include SRTM(Shuttle Radar Topography Mission), Temperature, Precipitation, SWC(Soil Water Content), fPAR(Fraction of Photosynthetically Active Radiation) representing for a productivity, and SR(Solar Radiation), which all cover Korean peninsula. When it performed PCA, the first three scores were assigned to red, green, and blue color. This color triplet indicates the relative mixture of the seventeen environmental conditions inside each ecological region. The first red one represents for 'physiographic conditions' worked by high elevation and solar radiation and low temperature. The second green one stands for 'seasonality' caused by seasonal variations of temperature, precipitation, and productivity. The third blue one means 'wetness condition' worked by high value such as precipitation and soil water contents. FA extraction shows that South Korea has relatively warm and humid ecosystem affected by high temperature, precipitation, and soil water contents whereas North Korea has relatively cold and dry ecosystem due to the high elevation, low temperature and precipitation. Results would be useful at environmental planning on inaccessible land of North Korea.

• Journal of Microbiology and Biotechnology
• /
• 제13권5호
• /
• pp.725-730
• /
• 2003

Three recombinant Saccharomyces cerevisiae strains showing different levels of xylose reductase activity were constructed to investigate the effects of xylose reductase activity and glucose feed rate on xylitol production. Conversion of xylose to xylitol is catalyzed by xylose reductase of Pichia stipitis with cofactor NAD(P)H. A two-substrate fermentation strategy has been employed where glucose is used as an energy source for NADPH regeneration and xylose as substrate for xylitol production. All recombinant S. cerevisiae strains Yielded similar specific xylitol productivity, indicating that xylitol production in the recombinant S. cerevisiae was more profoundly affected by the glucose supply and concomitant It generation of cofactor than the xylose reductase activity itself. It was confirmed in a continuous culture that the elevation of the glucose feeding level in the xylose-conversion period enhanced the xylitol productivity in the recombinant S. cerevisiae.

• Journal of Microbiology and Biotechnology
• /
• 제30권1호
• /
• pp.136-145
• /
• 2020

Chlorella sp. HS2, which previously showed excellent performance in phototrophic cultivation and has tolerance for wide ranges of salinity, pH, and temperature, was cultivated heterotrophically. However, this conventional medium has been newly optimized based on a composition analysis using elemental analysis and ICP-OES. In addition, in order to maintain a favorable dissolved oxygen level, stepwise elevation of revolutions per minute was adopted. These optimizations led to 40 and 13% increases in the biomass and lipid productivity, respectively (7.0 and 2.25 g l^-1d^-1 each). To increase the lipid content even further, 12 h heat shock at 50℃ was applied and this enhanced the biomass and lipid productivity up to 4 and 17% respectively (7.3 and 2.64 g l^-1d^-1, each) relative to the optimized conditions above, and the values were 17 and 14% higher than ordinary lipid-accumulating N-limitation (6.2 and 2.31 g l^-1d^-1). On this basis, heat shock was successfully adopted in novel Chlorella sp. HS2 cultivation as a lipid inducer for the first time. Considering its fast and cost-effective characteristics, heat shock will enhance the overall microalgal biofuel production process.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.39-42
• /
• 2012

Pusher-Loaded Scrapers are important construction equipment for large earthmoving operations. Production rates of a Pusher-Loaded Scraper vary greatly in accordance with the temperature or elevation, the equipment performance, haul speed, haul-road conditions, the method of loading, and Number of scrapers per one pusher. Determining of most economical scrapers fleet regarding the size of equipment, model name, and number of scrapers demands time-consuming calculation because it needs to reference of varied performance charts or tables and repeat complicated calculation. In this study, decision-making support system for the Optimal Pusher-loaded Scrapers Fleet is suggested for the purpose of calculating easily and handling effectively variables which are changed depend of the work conditions. The prototype of this program is developed using MATLAB. And the Database of Pusher-loaded Scraper embodies Performance chart & Retarder chart, soil properties, and calculation-support table.

• 한국안전학회지
• /
• 제25권5호
• /
• pp.1-6
• /
• 2010

When the ceramic material is being machined, micro crack and brittle fracture dominate the process of material removal. Generally, ceramics are very difficult-to-cut materials and machined using conventional method such as grinding and polishing. However, such processes are generally cost-expensive and have low material removal rate. Machinable ceramics used in this study contain BN powder to overcome these problem and for productivity elevation. This paper focuses on machinability evaluation during end mill process with CNC machining center in this study. Experiment for this purpose is performed for tool wear patterns and mechanism.

• 미생물학회지
• /
• 제15권2호
• /
• pp.63-76
• /
• 1977

Irradiation with high doses of gamma rays induced the reduction of mycelial weight and anaylase activity, and increased relative amylase activity in surface cultures. Biphase in growth curves was shown in aeration-agitation cultures but the behavior of the first phase of growth could be eliminated by replacing the amylasehydrolysed starch substrates, so that enzyme production was shortened ca. 40 hours and relative amylase activity was increased about 3 times higher before onset of autolysis. In the effect of gibberellin on amylase production, the positive stimulation was appeared to only surface culturs of the liquid medium and the negative effect to shake-cultures in a mutant. Trials of various continuous culture were resulted not only the approalch to the value of amylase activity in surface cultures of liquid medium, but also higher productivity than in batch cultures. The culture-degeneration was observed in two-stage continuous culture, but did not appear in continuous elevation culture.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.155-158
• /
• 1999

Because the traditional filters have many demerits, multi-step electric oil filter have manufactured the efficiency of insulating oil to improve. Therefore, the function of oil filter to improve based on my experience and know-how about my job. Through this study have obtained many merits. The efficiency of insulating oil is improved. The waste oil reused in repair works of the damaged transformer. Multi-step filter is shortening the working time and safety. it is handy for use and movement. This study lengthen the expected life span of filter. The improvement of oil filter bring about elevation of productivity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2753-2755
• /
• 2003

Overhead crane must do to control occurrence of Anti-Sway according to work situation that is used in case move industry spot's heavy freight, and do safe transfer of freight. Transfer process that make use of crane suspends and consist of series action that put down freight to do relevant addition decreasing the speed before objective while move by schedule section equal speed because increasing the speed after lift thing. This need skill degree by experience because there are operator's function and affinity. Also, must control this effectively because can affect big productivity elevation according to effect that get in transfer of safe freight, Therefore, illuminate physical characteristic of crane and algorithm of motor drive department and there is purpose of this research to do so that correct control may be available through over head crane's shaking control and position control designing LQ controller.

• 간호행정학회지
• /
• 제5권2호
• /
• pp.237-251
• /
• 1999

The purpose of this study is to suggest successful strategies through which the effect of the information system of a hospital can be forecasted at the nursing department. In order to set up successful strategies, in the first place, both the methods of CSF(Critical Success Factor: Rockart, 1979) and ULD(User-Led Development) method and the method suggested by the Korea Productivity Center were applied. In order to measure the improvement of nursing productivity, the Dissonance theory was used. The data were collected from 100 employees serving at the clinic department of Kwangju Patriots' and Veterans' Hospital from July 4 to July 25, 1998 with reference to all 222 cases, for sampling work; then the part of the efficiency of the treatment or management of hospital business - simplification of the process of the treatment of hospital business and reduction of the time of the treatment of hospital business were measured; and in order to forecast organizational behavior, 100 cases of organization behavior were analysed, based on the well structured, questionnaires. In order to forecast the user's organizational behavior, a tool(Ronald. 1988; Stephen, 1982: Senn, 1992: Olsen, 1980: Anderson, 1988: Kim. 1992: Cho. 1994) to measure the extent or degree of the user's recognition or understanding whose reliability coefficient is 0.63 was used: and regarding the items expected by the users concerning the convenience of the system, a tool created by Bernadett, Szajna and Richard W. Scamell(1993) whose reliability coefficient is 0.88 was used. And finally, those data were analysed, utilizing the statistical package of SPSS/PC 6.0. successful strategies are suggested as follows: 1. In order that the Kwangju Patriots' and Veterans' Hospital's purpose can be successful through its strategic, information system, the quality of its services should be elevated. and for elevating the quality of medical services, elevation of the quality of medical expertism or specialty is an important factor in determining such quality. 2. In order to make the hospital information system to be successful, the hospital's top manager should participate in the effort making it successful with helping hands of the members or personnel of the hospital. 3. In order to make users participate in the hospital information system, it is prerequisite that all nurses in a hospital should voluntarily participate in the system 4. In order to reduce the expense, the time in coping with business per duty should be reduced by 10${\sim}$33.23%. The time of the direct nursing care which added value is relatively high should be elongated in order to elevate the quality of hospital services. 5. Since the introduction and spread of the hospital information system are influenced by the duration in the experience of computer use, the user of the hospital information system should have a plan to receive well-planned computer education. Finally it is suggested that the forecast of long-term productivity through a review of the user's expectation of the system should be inspected and tested through continuous studies of its effectiveness.