• Journal of Microbiology and Biotechnology
• /
• v.34 no.3
• /
• pp.663-672
• /
• 2024

The use of nanoparticles as a delivery system for a specific antigen could solve many limitations of mucosal vaccine applications, such as low immunogenicity, or antigen protection and stabilization. In this study, we tested the ability of nasally administered chitosan nanoparticles loaded with glycoprotein B of murine cytomegalovirus to induce an immune response in an animal model. The choice of chitosan nanoparticle type was made by in vitro evaluation of sorption efficiency and antigen release. Three types of chitosan nanoparticles were prepared: crosslinked with tripolyphosphate, coated with hyaluronic acid, and in complex with polycaprolactone. The hydrodynamic size of the nanoparticles by dynamic light scattering, zeta potential, Fourier transform infrared spectroscopy, scanning electron microscopy, stability, loading efficiency, and release kinetics with ovalbumin were evaluated. Balb/c mice were immunized intranasally using the three-dose protocol with nanoparticles, gB, and adjuvants Poly(I:C) and CpG ODN. Subsequently, the humoral and cell-mediated antigen-specific immune response was determined. On the basis of the properties of the tested nanoparticles, the cross-linked nanoparticles were considered optimal for further investigation. The results show that nanoparticles with Poly(I:C) and with gB alone raised IgG antibody levels above the negative control. In the case of mucosal IgA, only gB alone weakly induced the production of IgA antibodies compared to saline-immunized mice. The number of activated cells increased slightly in mice immunized with nanoparticles and gB compared to those immunized with gB alone or to negative control. The results demonstrated that chitosan nanoparticles could have potential in the development of mucosal vaccines.

• Korean Journal of Agricultural Science
• /
• v.51 no.2
• /
• pp.109-121
• /
• 2024

Mancozeb is a manganese and zinc-containing fungicide that belongs to the ethylene bisdithiocarbamate group and produces ethylene thiourea (ETU) after biotransformation or environmental degradation, which has toxicological hazard owing to its known antithyroid properties. Although mancozeb leads to negative changes in fertility capacity, the effects of ETU are less known. Therefore, this study examined the alteration of fertilization competence in boar spermatozoa exposed to ETU. The sperm motility, motion kinematics, viability, acrosome integrity, chromatin stability, and intracellular reactive oxygen species (ROS) production of sperm subjected to various ETU concentrations (10, 50, 100, and 200 µM) were evaluated after two different incubation times (30 min and 2 hrs). In addition, the relative mRNA expression of the sperm functional proteins was analyzed after exposure to ETU. A dose-dependent motility reduction was observed in sperm exposed to ETU during both incubation periods compared to the controls. The motion kinematics were reduced significantly in sperm incubated with ETU. Higher percentages of viable sperm were observed in the controls, while such viability was decreased significantly in sperm with 10 - 200 µM ETU. The acrosome integrity was particularly damaged on sperm incubated with 10 - 200 µM ETU for 30 min. Higher intracellular ROS levels were produced in sperm exposed to 200 µM ETU. In addition, lower relative levels of AKAP3, AKAP4, ODF2, and ZPBP2 expression were observed in sperm exposed to ETU compared to the controls. Mancozeb and ETU could adversely affect the reproductive functions of mammals. Hence, the effects of ETU on the reproductive system should be examined further.

• Food Science of Animal Resources
• /
• v.44 no.5
• /
• pp.1028-1039
• /
• 2024

Alternative protein sources with greater nutritional value and a lower environmental footprint have recently attracted interest in the production of meat substitutes. However, it is required that these alternatives mimic the texture and structure of meat. This study investigated varying ratios of textured vegetable proteins (TVP) to Tenebrio molitor larvae (brown mealworm; TM) with the addition of transglutaminase (TG) to determine the quality characteristics of these emulsions. The results demonstrated low protein solubility of the emulsions as TVP content increased. Furthermore, when the proportion of TM was high, the TG-treated emulsion had a low pH. Additionally, when there was a high TM ratio to TVP in the TG treatment, the emulsions demonstrated better thermal stability and water holding capacity. Regarding the rheological properties of the emulsion, both the frequency-dependent storage modulus (G') and loss modulus (G'') increased as the proportion of TVP in the emulsion increased with and without the addition of TG. Differential scanning calorimetry analyses demonstrated two protein denaturation peaks in all treatments, with high peak temperatures for both treatments with a high proportion of TM. The hardness and chewiness of the emulsion were highest in the treatment (T6 and T8) with TG, and the gumminess of the emulsion was greatest when TM only or when equal ratios of TVP and TM were treated with TG, respectively. In conclusion, the addition of TM to TVP with TG improves the overall texture of the protein mixture, making it a suitable meat alternative.

• Human Ecology Research
• /
• v.62 no.3
• /
• pp.505-516
• /
• 2024

A new low-sugar yogurt with carrot jam was developed by reflecting consumers' demands of yogurt and the characteristics required for the development of new yogurt. To examine the storage stability of yogurt containing carrot jam, the yogurt was stored in a refrigerator at 4℃ for 21 days, and changes in pH and titratable acidity were examined at 3-day intervals. Nine nutrient contents of yogurt were analyzed to compare the sugar content of the control and carrot jam-added yogurt. Considering the health functionality of new yogurt, when questioned about the appropriate amount of sugar content in yogurt, numerous respondents indicated that they wanted the sugar content to be reduced by about 1 to 5% (73.3%) compared with existing products and that the taste should remain similar to existing products (32.2%). The pH and titratable acidity of yogurt with 4% carrot jam were measured during storage, and it was found that the yogurt had excellent storage properties up to the twenty-first day of production. According to the result for the nutrient contents of yogurt with 4% carrot jam, it was found that the total carbohydrate content, including the dietary fiber content of carrots, was 9.3% while the sugar content was 4.7% which was lower than the sugar content of the control group of 7.0%. Considering the above results, it is expected that the consumption of Jeonnam regional specialties will be promoted through commercialization research on yogurt with carrot jam, which can meet consumers' health needs and perceptions toward the new yogurt.

• Korean Journal of Poultry Science
• /
• v.41 no.2
• /
• pp.135-142
• /
• 2014

This study was conducted to evaluate dietary effects of Marigold extract on laying performance, egg quality, oxidative stability of egg yolk and lutein transfer into chicken eggs. A total of one-hundred eighty nine 55-wk-old Hy-Line Brown layers were divided into seven groups and fed control diet or each experimental diet containing 0.1, 0.3, 0.5, 1.0, 1.5 or 2.0% Marigold extract. Egg production, egg weight and daily egg mass were not affected by dietary treatments. The yolk colors in groups fed diets containing Marigold extract were significantly higher than that of control. The Haugh unit were tended to be improved by feeding of diets containing Marigold extract although there were no significant difference in egg shell strength and thickness. The MDA (malondialdehyde) contents in groups fed diets containing Marigold extract above 0.5% were significantly reduced than that of control. After 14d of storage, the Haugh unit values in groups feed diets containing 0.3 and 1.0% Marigold extract were significantly higher than that of control (p<0.05). The concentration of lutein in egg yolk increased by feeding of Marigold extract. When 2% Marigold extract was supplemented to the diet, lutein content of egg was increased as much as 1.71 mg/60 g. These results indicated that the use of Marigold extract in layer diets was effective in egg quality and for the production of lutein fortified eggs.

• Journal of Animal Science and Technology
• /
• v.48 no.5
• /
• pp.699-708
• /
• 2006

Ground rice, barley and corn were fed separately to the ruminally cannulated Hanwoo (Korean native cattle) for comparing their in situ and in vitro degradabilities, microbial growth, pH and gas production. It has been found that nearly all the dry matter (DM) and organic matter (OM) in barley and rice disappeared during 24 hr suspension in the rumen, but those in corn were only reduced by around 67%. Water soluble DM and OM fractions(‘a’), ranked from highest to lowest was corn, then rice and finally barley, but the order was reversed for content ‘b’, degradable fraction during time ‘t’. Judging by the degradation parameter of ‘b’ fraction, degradation rates per hour of DM and OM for barley were 38.3% and 37.2% respectively, significantly higher than those for rice (7.7% and 5.6%) and corn (4.1% and 1.3%). In general, results obtained from in vitro degradability of DM and OM were lower than those from in situ trials, but the ranking order of degradability was in agreement between both trials. In particular, ground rice has relatively lower in vitro microbial growth than corn or barley, but exhibited higher gas production. In addition, in vitro microbial growth of ground rice increased with up to 12 hr of incubation period, thereafter experienced a decrease with extended incubation time. pH of in vitro solution of rice decreased following 9 hr of incubation but gas production increased rapidly during the same period. From the results of DM and OM degradabilities and pH changes of in vitro solution with incubation time, it is concluded that rice represents a good source of energy for stability of rumen fermentation.

• KSBB Journal
• /
• v.15 no.5
• /
• pp.489-496
• /
• 2000

Several culture systems including batch, two-stage CSTR, semi-fed batch, and two-stage cyclic fed-batch were investigated for the efficient production of the Fab fraction of PDC-E2 specific human monoclonal antibody using high cell density recombinant E. coli. A two-phase batch system and a two-stage continuous system were examined to overcome plasmid instability problems, by separating the growth and the production stages. The cell density and productivity of the two-stage continuous culture was better than that of the two-phase batch fermentation. In the two-stage continuous culture system with DO-stat, the cell growth and the productivity were superior to those of the system without the DO control. Also, almost total plasmid stability was maintained in the two-stage continuous culture system. Modified M9 medium was selected as an optimum feeding medium for the fed-batch process, and the optimum C/N ratio determined to be 2:3. The optimum feeding rate was $0.6g/\ell/hr$ for a constant feeding strategy in semi-fed batch system. When the feeding medium was fed by pulsing, it was observed that more frequent pulsing resulted in improved cell growth. The linear feeding method was the most efficient of the various feeding methods tested. Finally, high cell density culture using a two-stage cyclic fed batch system with pH-stat was tried because the linear feeding method showed limitations in terms of obtaining high cell densities, and a cell density of $54 g/\ell$ was achieved. It was concluded that the two-stage cyclic fed batch system was the most efficient system for high cell density culture of the systems tested. However, productivity improvements were lower than expected due to the extremely high accumulations of acetate, although the low levels of residual glucose were maintained.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.324-332
• /
• 2019

Most countries including Korea and Indonesia have strong policy for implementing biofuels like biodiesel. Shortage of the oil feedstock is the main barrier for increasing the supply of biodiesel fuel. In this study, in order to improve the stability of feedstock supply and lower the biodiesel production cost, the feasibility of biodiesel production using two types of Indonesian tropical crop oils, pressed at different harvesting times, were investigated. R. Trisperma oils, a high productive non-edible feedstocks, were investigated to produce biodiesel by esterification and transesterification because of it's high impurity and free fatty acid contents. the kindly provided oils from Indonesia were required to perform the filtering and water removal process to increase the efficiency of the esterificaton and transesterification reactions. The esterification used heterogeneous acid catalyst, Amberlyst-15. Before the reaction, the acid value of two types oil were 41, 17 mg KOH/g respectively. After the pre-esterification reaction, the acid value of oils were 3.7, 1.8 mg KOH/g respectively, the conversions were about 90%. Free fatty acid content was reduced to below 2%. Afterwards, the transesterification was performed using KOH as the base catalyst for transesterification. The prepared biodiesel showed about 93% of FAME content, and the total glycerol content was 0.43%. It did not meet the quality specification(FAME 96.5% and Total glycerol 0.24%) since the tested oils were identified to have a uncommon fatty acid, generally not found in vegetable oils, ${\alpha}$-eleostearic acid with much contents of 10.7~33.4%. So, it is required to perform the further research on reaction optimization and product purification to meet the fuel quality standards. So if the biodiesel production technology using un-utilized non-edible feedstock oils is successfully developed, stable supply of the feedstock for biodiesel production may be possible in the future.

• 한국유가공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.59-60
• /
• 2002

Edible films such as wax coatings, sugar and chocolate covers, and sausage casings, have been used in food applications for years$^{(1)}$ However, interest in edible films and biodegradable polymers has been renewed due to concerns about the environment, a need to reduce the quantity of disposable packaging, and demand by the consumer for higher quality food products. Edible films can function as secondary packaging materials to enhance food quality and reduce the amount of traditional packaging needed. For example, edible films can serve to enhance food quality by acting as moisture and gas barriers, thus, providing protection to a food product after the primary packaging is opened. Edible films are not meant to replace synthetic packaging materials; instead, they provide the potential as food packagings where traditional synthetic or biodegradable plastics cannot function. For instance, edible films can be used as convenient soluble pouches containing single-servings for products such as instant noodles and soup/seasoning combination. In the food industry, they can be used as ingredient delivery systems for delivering pre-measured ingredients during processing. Edible films also can provide the food processors with a variety of new opportunities for product development and processing. Depends on materials of edible films, they also can be sources of nutritional supplements. Especially, whey proteins have excellent amino acid balance while some edible films resources lack adequate amount of certain amino acids, for example, soy protein is low in methionine and wheat flour is low in lysine$^{(2)}$. Whey proteins have a surplus of the essential amino acid lysine, threonine, methionine and isoleucine. Thus, the idea of using whey protein-based films to individually pack cereal products, which often deficient in these amino acids, become very attractive$^{(3)}$. Whey is a by-product of cheese manufacturing and much of annual production is not utilized$^{(4)}$. Development of edible films from whey protein is one of the ways to recover whey from dairy industry waste. Whey proteins as raw materials of film production can be obtained at inexpensive cost. I hypothesize that it is possible to make whey protein-based edible films with improved moisture barrier properties without significantly altering other properties by producing whey protein/lipid emulsion films and these films will be suitable far food applications. The fellowing are the specific otjectives of this research: 1. Develop whey protein/lipid emulsion edible films and determine their microstructures, barrier (moisture and oxygen) and mechanical (tensile strength and elongation) properties. 2. Study the nature of interactions involved in the formation and stability of the films. 3. Investigate thermal properties, heat sealability, and sealing properties of the films. 4. Demonstrate suitability of their application in foods as packaging materials. Methodologies were developed to produce edible films from whey protein isolate (WPI) and concentrate (WPC), and film-forming procedure was optimized. Lipids, butter fat (BF) and candelilla wax (CW), were added into film-forming solutions to produce whey protein/lipid emulsion edible films. Significant reduction in water vapor and oxygen permeabilities of the films could be achieved upon addition of BF and CW. Mechanical properties were also influenced by the lipid type. Microstructures of the films accounted for the differences in their barrier and mechanical properties. Studies with bond-dissociating agents indicated that disulfide and hydrogen bonds, cooperatively, were the primary forces involved in the formation and stability of whey protein/lipid emulsion films. Contribution of hydrophobic interactions was secondary. Thermal properties of the films were studied using differential scanning calorimetry, and the results were used to optimize heat-sealing conditions for the films. Electron spectroscopy for chemical analysis (ESCA) was used to study the nature of the interfacial interaction of sealed films. All films were heat sealable and showed good seal strengths while the plasticizer type influenced optimum heat-sealing temperatures of the films, 130$^{\circ}$C for sorbitol-plasticized WPI films and 110$^{\circ}$C for glycerol-plasticized WPI films. ESCA spectra showed that the main interactions responsible for the heat-sealed joint of whey protein-based edible films were hydrogen bonds and covalent bonds involving C-0-H and N-C components. Finally, solubility in water, moisture contents, moisture sorption isotherms and sensory attributes (using a trained sensory panel) of the films were determined. Solubility was influenced primarily by the plasticizer in the films, and the higher the plasticizer content, the greater was the solubility of the films in water. Moisture contents of the films showed a strong relationship with moisture sorption isotherm properties of the films. Lower moisture content of the films resulted in lower equilibrium moisture contents at all aw levels. Sensory evaluation of the films revealed that no distinctive odor existed in WPI films. All films tested showed slight sweetness and adhesiveness. Films with lipids were scored as being opaque while films without lipids were scored to be clear. Whey protein/lipid emulsion edible films may be suitable for packaging of powder mix and should be suitable for packaging of non-hygroscopic foods$^{(5,6,7,8,)}$.

• Korean Journal of Agricultural Science
• /
• v.15 no.2
• /
• pp.153-163
• /
• 1988

This experiment was carried out to obtain the thermophilic fungus producing amylase and to investigate properties of the amylase. The selected strain, L-11 was obtained from soil in the vicinity of a hot spring and identified as Mocor sp.. And then the conditions for enzyme production in wheat bran cultures and properties of the crude enzyme were investigated. Furthermore, the enzyme was purified and the characteristics of purified enzyme were studied. The results obtained were as follows: 1. On the wheat bran medium added 80-100% water, amylase was effectively produced by the selected strain, L-11 for 48 hrs incubation at $50^{\circ}C$. 2. When the crude enzyme solution of the strain L-11 was passed through DEAE-Sephadex A-50 column chromatography, two peaks having amylase activity were obtained, and one peak was that of the main enzyme (enzyme of B peak). 3. The purified enzyme (enzyme of B peak) was recognized as single protein band on polyacrylamide disc gel electrophoresis. 4. In the hydrolysis reaction of soluble starch by the enzyme of main amylase, oligosaccharides produced at early stage were maltose and maltotriose mainly and procedure of the reaction maltose amount of maltose and glucose was increased. 5. The strain L-11 was recognized as a special strain producing ${\alpha}-amylase$ mainly and scarcely glucoamylase. 6. The optimum pH, optimum temperature, pH stability, and temperature stability of ${\alpha}-amylase$ were pH 4.0, $60-65^{\circ}C$, pH 4.0-9.0, and below$70^{\circ}C$.