• 한국가시화정보학회지
• /
• 제2권2호
• /
• pp.45-51
• /
• 2004

Initial flame development and propagation were visualized under different fuel injection timings to relate the initial flame development to the engine stability in a port injection SI engine. Experiments were performed in an optical single cylinder engine modified from a production engine and images were captured through the quartz window mounted in the piston by an intensified CCD camera. Stratification state was controlled by varying injection timing. Under each injection condition, the flame images were captured at the pre-set crank angles. These were averaged and processed to characterize the flame. The flame stability was estimated by the weighted average of flame area, luminosity, and standard deviation of flame area. Results show that stratification state according to injection timing did not affect on the direction of flame propagation. The flame development and the initial flame stability are strongly dependent on the stratified conditions and the initial flame stability governs the engine stability and lean misfire limit.

• 한국응용과학기술학회지
• /
• 제12권1호
• /
• pp.1-11
• /
• 1995

In this outline, the stability of solid/liquid dispersion was theoretically investigated the matter from all angles by using the modified DLVO theory. The stability was handled various considerations such as a production and characteristics of electrical double layer, total interaction$(V_T)$ that consisting of attractive force$(V_A)$ and repulsion$(V_R)$. coagulation, the stability ratio(W), critical flocculation concentration (cfc) and zeta potential$(\zeta)$ etc. It was possible for us to examine with the stability ratio(W), critical flocculation concentration (cfc) and zeta potential$(\zeta)$ that may estimation of stability of solid/liquid dispersion experimentally.

• Journal of the Korean Wood Science and Technology
• /
• 제30권3호
• /
• pp.85-90
• /
• 2002

This study was carried out to investigate the dimensional stability of bentwoods by three treatments: steaming, urethane varnish coating, and polyethylene glycol (PEG) treatment. Bentwood processing employed a bending-jig with only 4 cm radius of curvature (ROC). The used species were bitter wood (Picrasma quassioides), painted maple (Acer mono), and birch (Betula schmidtiii). The bending properties of these are well-known in bentwood production (Jung et al., 2002). The bentwoods were treated repeated at room temperature [20℃, RH 80% (12 hours) and 40℃ under RH 10% (12 hours)]. To estimate the dimensional stability of bentwoods, we measured the radius of curvature and end-distance. The best results could be attained with PEG treatment. Steaming was the worst treatment. Comparing the properties of the different species, the dimensional stability of bitter wood was excellent. It was concluded that the steaming treatment was unsuitable for dimensional stability of bentwoods.

• Advances in nano research
• /
• 제13권2호
• /
• pp.135-146
• /
• 2022

The accurate assessment of the performance of nonuniform systems requires a thorough understanding of stability analysis. As a result, the theoretical modeling of the influence of various variables on the performance of small-scale nonuniform structures with conventional and non-conventional geometries is presented in this paper. According to the fundamental computer simulation based on mathematical and mechanical principles, the stability of the nonuniform structures is examined. Thus, a numerical procedure is used to simulate the stability and instability characteristics of the nonuniform small-scale structures via computer aid. Theoretic simulation methods provide a great deal of the design and production of small-scale structures at a low cost compared to experimental simulations. Thus, this paper provides a good presentation of the stability analysis of the nonuniform nanoscale structures with high accuracy without actual experimental.

• Journal of Microbiology and Biotechnology
• /
• 제1권2호
• /
• pp.116-120
• /
• 1991

The transformant Bacillus subtilis ED213 carrying the pSO100 which cloned the cdd gene encoding cytidine deaminase (cytidine /2'-deoxycytidine aminohydrolase, EC 3.5.4.5, CDase) originated from wild type B. subtilis was cultivated in Spizizen minimal medium (SMM). To overcome poor expression of the cdd gene in SMM medium, the medium compositions and growth conditions were optimized. The optimized medium compositions and growth conditions were cytidine concentration of 80 mg/l, glycerol of 25 g/l, and $(NH_4)_2SO_4$ of 10 g/l, along with $37^{\circ}C$ and pH 7.0. The intracellular CDase production was increased 3 times from 1,000 unit/ml to 3,200 unit/ml, and extracellular CDase also increased from nearly undetectable amounts to 1,500 unit/ml. The cytidine concentration was signified as the most critical compositional factor for overproduction of CDase by increasing the cell density mainly in culture broth. The plasmids were more stable in cells that were grown in original SMM medium with stability of 90% compared to those grown in optimized SMM medium with stability of 80% after 48 hours cultivation. The most active amplification of plasmid was occurred in the logarithmic phase, which showed a value around four times higher than the initial copy number. In the exponential phase, the CDase production was closely related to the plasmid copy number along with the cell density. However, it was not accorded with cell density at the stationary phase.

• KSBB Journal
• /
• 제7권4호
• /
• pp.284-289
• /
• 1992

유전자 조작된 Klebsiella pnuemonia를 이용하여 트립토판 생산을 위한 최적 조건 및 플라스미드 안정성에 대한 연구를 수행하였으며, 최적온도는 $37^{\circ}C$, 최적온도에서의 비증식속도는 1.05$h^{-1}$로 측정되었다. 포도당을 기질로 사용하여 첨가회분배양 36시간 후의 트립토판 농도는 0.175g/l 이었으며, 이 결과는 다른 회분배양이나 플라스크 배양에 비해 1.2 및 1.6배 증가한 수치이다. 첨가회분배양에서의 균주안정성은 플라스크에서의 연속 교대 배양에서는 95%가 유지되었으나 첨가 회분배양에서는 50%만이 유지됨을 측정했다.

• Journal of Microbiology and Biotechnology
• /
• 제21권11호
• /
• pp.1159-1165
• /
• 2011

Biodiesel is methyl and ethyl esters of long-chain fatty acids produced from vegetable oils or animal fats. Lipase enzymes have occasionally been used for the production of this biofuel. Recently, biodiesel production using immobilized lipase has received increased attention. Through enhanced stability and reusability, immobilized lipase can contribute to the reduction of the costs inherent to biodiesel production. In this study, methanol-tolerant lipase M37 from Photobacterium lipolyticum was immobilized using the cross-linked enzyme aggregate (CLEA) method. Lipase M37 has a high lysine content (9.7%) in its protein sequence. Most lysine residues are located evenly over the surface of the protein, except for the lid structure region, which makes the CLEA preparation yield quite high (~93%). CLEA M37 evidences an optimal temperature of $30^{\circ}C$, and an optimal pH of 9-10. It was stable up to $50^{\circ}C$ and in a pH range of 4.0-11.0. Both soluble M37 and CLEA M37 were stable in the presence of high concentrations of methanol, ethanol, 1-propanol, and n-butanol. That is, their activities were maintained at solvent concentrations above 10% (v/v). CLEA M37 could produce biodiesel from olive oil and alcohols such as methanol and ethanol. Additionally, CLEA M37 generated biodiesel via both 2-step methanol feeding procedures. Considering its physical stability and reusability, CLEA M37 may potentially be used as a catalyst in organic synthesis, including the biodiesel production reaction.

• 항공우주시스템공학회지
• /
• 제11권4호
• /
• pp.8-14
• /
• 2017

본 연구에서는 n-데칸과 물을 혼합한 에멀젼 연료를 제조하고, 연료의 유변학적 안정성을 측정하였다. 에멀젼 연료는 n-데칸과 순수, 유화제로 Span 80을 혼합하여 제조되었다. 연료 내부 물 부피비 및 연료온도 증가는 연료의 상분리를 촉진시키는 요소로 확인되었다. 연료의 물 부피비, 온도 및 제조시간 경과에 따른 유변학적 변화를 관찰하였을 때, 물 부피비가 증가할수록 연료의 비뉴턴 유체거동이 확인되었으며, 온도가 높아질수록 연료 내부 물액적 응집으로 인한 점도감소가 관찰되었다. 낮은 물 부피비에서는 연료 제조시간에 따른 점도변화가 크지 않았으나, 혼합비가 3:7 인 경우 3시간 이후부터 점도의 점진적인 감소가 관찰되었다.

• Advances in nano research
• /
• 제14권2호
• /
• pp.165-177
• /
• 2023

Nanomotors are gaining popularity as novel drug delivery methods since they can move rapidly, penetrate deeply into tissues, and be regulated. The ability of manufactured nanomotors to swiftly transport therapeutic payloads to their intended location constitutes a revolutionary nanomedicine strategy. The nanomotors for the drug delivery purpose are released in the blood flow under the different physical conditions, so the stability investigation of these devices is essential before the production, especially in the sport and physical exercise conditions that the blood flow enhances. As a result, using dynamic analysis, this article investigates the stability of the nanomotor released in the blood flow when sport and physical activity circumstances increase blood flow. The considered nanodevice is made of a central motor, and nanotubes are used for the nanomotor blade, which is the drug capsule. Finally, the stability examination of nanomotor as the drug delivery equipment is discussed in detail, and the proposed results can present beneficial results in designing and producing small-scale intelligent devices.

• 한국초지조사료학회지
• /
• 제34권4호
• /
• pp.247-253
• /
• 2014

본 연구에서는 메타분석을 통하여 heterofermentative과 homofermentative LAB가 사일리지의 품질과 호기적 안정성에 대한 효과를 분석하였다. 일련의 분석결과 접종균으로 사용된 젖산균의 종류에 따라서 사일리지의 품질이 다르게 나타남을 확인할 수 있었다. 특히 호기적 안정성에 있어서 heterofermentative LAB의 사용이 매우 중요함을 알 수 있었다. 본 연구결과는 사일리지의 제조 목적 및 사용방법에 따라서 접종균주를 다르게 선발하여야 하며, 사용방법에 따라서 사일리지 내 유기산 조성을 변화시킬 수 있는 발효조건이 필요함을 시사하고 있고, 또한 보다 정밀한 사일리지 발효기술에 대한 기초자료를 제공한다.