• 한국해양학회지
• /
• 제2권1_2호
• /
• pp.1-12
• /
• 1967

바다의 플랭크톤은 장소와 시기에 따라 출현종류와 수량에 많은 변동이 있고, 이것들의 종적조성, 출현수량 또는 그 분포는 바다의 생태계를 구명하고, 해역의 생산성을 계측하는데 극히 중요한 기초적지식이 될뿐아니라 어업과 바다의 양 증식 에도 직접적인 관련을 갖는 중요한 자료가 된다.

• Parasites, Hosts and Diseases
• /
• 제51권4호
• /
• pp.479-484
• /
• 2013

Neutrophils are the predominant inflammatory cells found in vaginal discharges of patients infected with Trichomonas vaginalis. In this study, we examined superoxide anion ($O^{\cdot}_{2^-}$) production by neutrophils activated by T. vaginalis. Human neutrophils produced superoxide anions when stimulated with either a lysate of T. vaginalis, its membrane component (MC), or excretory-secretory product (ESP). To assess the role of trichomonad protease in production of superoxide anions by neutrophils, T. vaginalis lysate, ESP, and MC were each pretreated with a protease inhibitor cocktail before incubation with neutrophils. Superoxide anion production was significantly decreased by this treatment. Trichomonad growth was inhibited by preincubation with supernatants of neutrophils incubated for 3 hr with T. vaginalis lysate. Furthermore, myeloperoxidase (MPO) production by neutrophils was stimulated by live trichomonads. These results indicate that the production of superoxide anions and MPO by neutrophils stimulated with T. vaginalis may be a part of defense mechanisms of neutrophils in trichomoniasis.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2000년도 춘계학술대회
• /
• pp.97-110
• /
• 2000

Production schedule and realization quantity of Large type bus [929(HD), 928, 928-A(SD), 937E/L, 937/L,] were analyzed in order to intruoduce FMS(Flexible Manufacturing System) appropriate for varities of customer desire and multi-item, small lot production. And this paper is aimed to propose introduction method of FMS, analyzing zig tools change times and idle times with production line and workers as an object. According to analysis results, only simple spec., depending on bus type, changed with decrease in production. For 929(HD), 928,928-A(SD), 937Eh, 937/L bus type, there was no harmony between schdule and realization. Therefore, it caused many difficulties in part supply. And there was loss of manpower and reduction of productibility due to idle time of process with bus type change. Production processes were operated inefficiently because tact time exceeded or shortaged of allow time.

• 한국산림과학회지
• /
• 제103권4호
• /
• pp.639-645
• /
• 2014

본 연구는 비모수추정 방법인 자료포락 기법을 이용하여 우리나라 표고버섯 재배 임가를 대상으로 경영효율성을 평가하였다. 조사자료는 2013년 3월부터 10월까지 실시한 '표고버섯 경영 표준진단표' 적용 결과 중에서 20개 임가의 투입요소와 산출요소를 대상으로 하였다. 그리고 DEA 기법중 CCR 모형과 BCC 모형을 이용하여 기술효율성, 순수기술효율성, 규모효율성을 분석하였고 비효율성 임가의 개선방안도 제시하였다. 추가적으로 주업과 겸업재배임가의 경영효율성을 비교 분석하였다. 연구결과, 표고버섯 재배 임가의 전체기술효율성은 평균 0.655로 나타나 전체적으로 비효율성이 높은 것으로 나타났고 비효율성의 원인은 순수기술효율성(0.830)보다는 규모효율성(0.747)에 있는 것으로 분석되었다. 효율성 값이 1인 표고버섯 재배임가는 DMU2, DMU5, DMU6, DMU8, DMU10, DMU15, DMU20으로 7개 임가로 나타났다. 그리고 DMU7 재배임가의 경영효율성 진단 결과, 투입요소 중 신규접종비와 조성비에서 준거집단과 비교해 볼 때 과도하게 투입되고 있는 것으로 분석되었다. 주업과 겸업임가의 효율성 비교 결과 겸업임가가 상대적으로 비효율성이 높은 것으로 나타났고 그 원인으로 규모효율성이 문제가 있는 것으로 파악되었다.

• 한국의류산업학회지
• /
• 제12권2호
• /
• pp.162-171
• /
• 2010

This study aims to discuss what changes Korean clothing companies and manufacturers have undergone with production facilities moving abroad due to offshore outsourcing and examine what conditions the clothing manufacturers are facing and how the clothing companies recognize those manufacturers. For these purposes, in-depth interviews were conducted with 24 firms with annual production capacity of more than 200,000 pieces among clothing brands for the domestic market, clothing exporters and promotion agencies. Those interviewed firms were the companies who were found to produce more than 200,000 pieces of clothing per year, and the interview-based survey was conducted from December 18, 2008 to January 30, 2009. The key findings from this study are as follows; first, a high percentage of interviewed firms were producing only a small number of items in Korea with a large part of their production line transferred abroad or outsourcing all of their production abroad only with their headquarters in Korea. Second, many were employing contractors rather than their own factories. Third, when asked about the wage levels of clothing manufacturers, many of the clothing companies gave responses such as: 'They are just our contractor, so we respect their decision,' 'We don't know because it's none of our business,' or 'We don't know at all.' Fourth, when asked about the work environment of clothing manufacturers, the clothing companies gave responses such as: 'We know in part,' 'To our knowledge, they conform to the Labor Standards Law,' or 'We don't know at all.' Fifth, the production line of clothing manufacturers featured straight-line systems, specialization, pairing and compounding/mixing. Sixth, it was found that clothing companies had interest in mass customization but their preparations were not satisfactory.

• 한국경영과학회지
• /
• 제31권4호
• /
• pp.69-87
• /
• 2006

This paper proposes an effective approach for the part-machine grouping(PMG) based on the non-binary part-machine incidence matrix in which real manufacturing factors such as the operation sequences with multiple visits to the same machine and production volumes of parts are incorporated and each entry represents actual moves due to different operation sequences. The proposed approach adopts Fuzzy ART neural network to quickly create the Initial part families and their machine cells. A new performance measure to evaluate and compare the goodness of non-binary block diagonal solution is suggested. To enhance the poor solution due to category proliferation inherent to most artificial neural networks, a supplementary procedure reassigning parts and machines is added. To show effectiveness of the proposed approach to large-size PMG problems, a psuedo-replicated clustering procedure is designed. Experimental results with intermediate to large-size data sets show effectiveness of the proposed approach.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.330-333
• /
• 2000

Dimensional accuracy and surface quality are very important in rapid prototyping especially when the models are used for the production of tools. This paper presents the development of benchmarking part to investigate dimensional accuracy and surface finish. A new test part is designed to perform benchmarking of major rapid prototyping processes such as selective laser sintering, laminated object manufacturing, stereolithography apparatus, and fused deposition modeling. The test part design includes basic manufacturing features such as holes, walls, squares, cylinder and etc. In addition, the small features are included in order to evaluate the fine details that can be manufactured by a specific RP process. The CMM program that automatically measures different features in the test part is also developed. The evaluation of accuracy as well as surface roughness are discussed for major rapid prototyping processes.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.32-35
• /
• 2004

The development of automotive rear chassis part using tube forming process has advantage of increase in part durability and decrease in its weight. We developed tubular type rear CTBA(Coupled Torsion Beam Axle) part with 60K high strength steel developed by POSCO in this project. The result was demonstrated that tubular type CTBA shows excellent durability performance and $10\%$ weight reduction compared with V-beam type CTBA in our work. Furthermore, we will adapt this technology to mass production and apply to the other chassis parts.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.81-86
• /
• 1999

The STL file format is an approximation of 3-D model with triangular facets. STL is a standard input file format of Rapid Prototyping(RP) equipment. In computer graphics, a circle has been approximated with an inscribed polygon, which causes an error between the real and approximated circles. In this study, an intersecting polygon has been used to approximate the circle and applied to produce more accurate RP part. The newly proposed method shows it's excellence in part accuracy.

• 산업경영시스템학회지
• /
• 제10권16호
• /
• pp.19-26
• /
• 1987

Since many small and medium sized enterprises have lack of funds to install the full scale Computer Aided Process Planning this study has been attempted to develop a part of computer generated production information system for a start. The system is programmed by DBASE III and BASIC languages for the IBM-PC competables for the sake of user's convenience. The system consisted of four major parts. The first part is a computerized work measurement system for applying WF predetermined time standards. The second part is a computerized forecasting and loading system for applying various statistical techniques. The third part is a GT scheduling system programmed by BASIC for applying heuristic scheduling method. Finally, the last part is a simulation system for GT scheduling efficiency test which is programmed by SIMAN simulation language.