• Journal of Advanced Navigation Technology
• /
• v.13 no.2
• /
• pp.238-243
• /
• 2009

Now, the production process systems are largely based on automatic system using the wired network. The production process systems using wired network has disadvantage that it is expensive when the installed and replaced equipment. The each equipment happens to repair cost for control and management in production processes. And the replaced equipment has also the additional expense and breaks production process. These problems are solved through wireless communication between the industrial equipments. So, we propose wireless production process system based on IEEE 802.15.4 technology. It solves a complicated space and stops by replaced equipment in the factory. Then we simulated and analyzed IEEE 802.15.4 for Industrial Equipment based on Wireless Network.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.357-359
• /
• 2022

The market for eco-friendly food materials by online distribution is rapidly growing due to major environmental pollution such as air, soil, and water quality, and radical changes in living patterns caused by COVID-19. In addition, because of the aging population and the decrease in agricultural-related population due to social structural changes, aquaponics is emerging as a system that can solve problems such as independence of old economic activities, environmental protection, and securing healthy and safe food. This paper aims to design an intelligent plant growth measurement system among intelligent aquaponics production management modules for optimal growth environment derivation and quantitative production prediction by converging various ICT technologies into existing aquaponics systems. In particular, the focus is on designing systems suitable for production sites that do not have high-performance processing resources, and we propose a module configuration plan for production environments and training data and prediction systems.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.7
• /
• pp.951-960
• /
• 2018

Hanwoo cattle are an important food source in Korea and their supply can have a major impact on meat availability for Korean consumers. The Hanwoo population was 1.8 million head in 2005 and gradually increased to 2.6 million in 2015. Per capita beef consumption has also increased, to 11.6 kg per year in 2015, and is expected to continue to increase. Because intramuscular fat percentage is a critical contributor to meat quality, Hanwoo cattle are fed a high-energy corn-based diet for long fattening periods. Long fed diet causes significant alterations in fat percentage in the loin muscle and other areas of the carcass. However, these long feeding periods increase feeding costs and beef prices. Recently, there has been increased Korean consumer demand for lean beef which has less fat, but is tender and priced more reasonably. These consumer demands on the Korean beef industry are driving differing beef production systems and also changes to the beef grading methodology. Korean government has made a significant investment to select bulls with favorable production traits using progeny testing. Progeny tested bull semen has been disseminated to all Hanwoo farmers. A beef traceability system has been employed for all cattle breeds in Korea since 2009. Hanwoo cattle are ear-marked with a 12-digit identification number from birth to slaughter. This number allows traceability of the management history of individual cattle, and also provides information to consumers. Traceability including management information such as herd, farm, year of birth, and carcass data can determine estimated breeding values of Hanwoo. For a sustainable Hanwoo industry, research scientists in Korea have attempted to develop feeds for efficient fattening periods and precision feeding systems based on genetic information for Hanwoo cattle. These initiatives aim to Korean consumer demands for beef and provide more precision management in beef production in Korea.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.30-37
• /
• 2020

In the building construction, the steel-frame work occupies an important position in terms of structure, cost and quality. Especially in Japan, steel frames have traditionally been the main structure of many buildings. For steel-frame works in such positions, this paper investigates an existing steel fabricator to clarify the actual conditions of design decision making process and management method in steel production process. This study focuses on a steel fabricator (Company M in the following sentences), whose main market is Japan and which has facilities in Thailand, China, and Japan. Company M uses QR codes to control the production status of products, and exchanges all information between inside and outside the company via specialized departments in the form of documents. The authors have already analyzed the relationship between production lead time and defect rate based on actual project data at Architectural Institute of Japan in 2016. In 2019, we expressed the process from the confirmation of the design information of the current steel frame to the production by WBS, and clarified the relationship between the production lead time and steel frame product quality structurally. In this paper, the authors reoport the progress of the survey conducted so far, the positioning of the collected data, and the future survey policy.

• Journal of the Korean Society of Systems Engineering
• /
• v.4 no.2
• /
• pp.1-13
• /
• 2008

The development of hull curved plate forming automation system in ship production field begins from the need of stakeholders such as enterprise organization, who need the reduction of cost and time and improvement of productivity, and end users who work for this production process. Even though hull curved plate forming automation system has small scale, it is reasonable to consider the system as an interdisciplinary system, because the system includes all of hardware, software, human and information and has a specified objective to be performed. In this paper, introduction of 4 leading Model-Based Systems Engineering (MBSE)methodologies is described and SysML(Systems Modeling Language), which is designed to analyze, specify, design, and verify complex systems, is introduced in order to support those methodologies. Especially, SysML is applied to system modeling of hull curved plate forming automation system and focused on. The structure diagrams and behavior diagrams based on operational context of the automation system are used to make system architecture. The performed application of SysML to the hull curved plate forming automation system shows an example of applying SysML to the development of other autonomous systems in ship production domain.

• Korean Journal of Agricultural Science
• /
• v.43 no.3
• /
• pp.481-495
• /
• 2016

Lily, which is one of Korea's main flower exports, is one of the most important agricultural product in the country. Korean lily farmers have difficulty earning more profit from producing lilies, because of the high cost of lily bulbs. Most lily bulbs used in Korea are imported from the Netherlands. Thus, the Korean government has kept trying to supply more and better Korean lily bulbs. However, many experts have questioned the efficiency and economic value of the Korean lily production system. The purpose of this paper is to analyze the economic value of the production of lily bulbs in Korea. Especially, this study evaluates the economic value of the production systems of Korean lily bulbs and compares the results from several cases. The results of the present study presents some useful findings, as follows: first, two Korean production areas (Gangneung and Jeju) show a positive economic value but one Korean production area (Taean) presents problems causing a negative economic value. Second, the Korean production area in Vietnam currently has trouble in the view of economic value but will likely overcome that problem. Third, the production area in the Netherlands shows the best economic value. Thus, Korean lily bulb producers need to benchmark that system.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.10
• /
• pp.1108-1120
• /
• 1990

The present study is to develop an intelligent control system for flexible manufacturing system, which is suitable for a variety of manufacturing types with smaller production rates. The controller is designed to integrate heuristic rules with optimization techniques for loading as well as flow rate of parts and ultimately meeting performance indices. The control function implemented by an optimization technique is to calculate short term production rates of parts. The heuristic control determined by production rules requires knowledge base to evaluate selected loading alternatives according to short term production rate and current process information, and also to determine final decision pertaining to loading. In this case, the knowledge base is constructed using the rules for evaluating alternatives, decision criteria, and flow control of parts in manufacturing system. The database is formulated by means of managing and updating current process information. A graphic system to monitor current status of the function and operation of manufacturing system is developed, and computer simulation is carried out to evaluate the performance of the proposed controller.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.2
• /
• pp.88-109
• /
• 2020

This study aimed to distinguish categories of archival information and identify properties by their detail types, so that the various forms of architectural heritage information generated can be managed based on their attributes and characteristics. First, the specific uses of terms in the legal system were reviewed and their associated concepts specifically defined. "Architectural heritage" was defined as architecture belonging to the category of tangible cultural heritage as designated by law, and "architectural heritage archival information" was defined as all kinds of material expressed by electronic processing of the actual status for preservation and management. Next, the production status of architectural heritage archival information was reviewed in relation to the legal system. This confirmed that relevant legal systems were organized hierarchically and that various types of archival information were generated in a single project. Furthermore, it was confirmed that even archival information produced in the same form contained differing contents depending on the specific purpose and method, and that there was no classification by which to cover all archival information. Finally, it was also confirmed that detailed drawing types could be categorized according to the purpose of production and the target of the records. Based on the findings of this review, the type and properties of archival information were presented as the primary classification criteria, and the architectural heritage archival information was divided into 6 general types and 27 detailed types. Specifically, the linguistic form, dimension, temporal property, and graphic form of archival information were applied as criteria for the classification of general types, and the target, production purpose, production method of archival information, and content characteristics of archival information properties of archival information by type were comprehensively reviewed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1007-1012
• /
• 2004

To increase the productivity and efficiency of an enterprise, all relevant product information should be provided to shop floor workers timely and in a unified form because shop floor workers are final consumers of most accumulated information generated from various departments of an enterprise. but, most existing enterprise information systems have an emphasis upon providing design/manufacturing information to office workers. Proposed in this study is a development of integrated design/manufacturing information system focused system, the function required for shop floor activities. For developing integrated information system, the functional required for shop floor are identified and analyzed. Based on the extracted functional requirements, object-oriented system design and implementation is conducted. By using this system, shop floor workers can refer to all relevant information necessary to their work easily and in a integrated form.

• Proceedings of the CALSEC Conference
• /
• 1999.07a
• /
• pp.277-299
• /
• 1999

Since Chrysler Motor Co. had experienced the digital development system in the beginning of 1990's, most of leading automobile companies are trying to apply a digital information system for their own business process reengineering based upon concurrent engineering system from product planning phase. This is called as virtual DMU(Digital Mock-Up) system instead of the traditional PMU(Physical Mock-Up) system. By using the virtual prototype, all of the design requirements and system specifications can be checked, changed and optimized more quickly and more efficiently. This paper consists of five chapters for the DMU information system. In the 1$^{st}$ chapter, the principle of digital design system is suggested by using four basic modules such as product design module, process design module, manufacturing system design module and central control module. The basic scheme of DMU is introduced with the benefits of application in the chapter 2. In the chapter 3, a digital design process of new car development is explained with the detailed DMU design and design review processes. In the chapter 4, the practical DMU manufacturing techniques and applications are introduced as CAD/CAM analyses, DPA(Digital Pre-Assembly)reviews for development, production, operation and maintenance phases, digital tolerance analyses and digital factory analyses for assembling line simulation, automated robot welding processes, production jig ＆ fixtures and painting process simulation. Finally, the activities of digital design support; CAS-styling, CAE-engineering and CAT-testing are summarized for design optimization in the chapter 5. As today's automobile manufactures and related business organizations are struggling to compete in the global marketplace, they are concentrating on efficient use of DMU information system to reduce the new car development cost, to have shorten the delivery schedule and to improve product design quality. To meet the demand of those automobile industries on digital information systems, the CALS(Computer aided Acquisition and Logistics Support) and EC(Electronic Commerce)initiative has been focused as a dominant philosophy in defense ＆ commercial industries, specially automobile industries.s.