• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.5
• /
• pp.551-556
• /
• 2010

The large jellyfish Nemopilema nomurai causes serious damage to fisheries, particularly around the seas of Korea and Japan. Decreasing this damage requires knowledge of the distribution and abundance of jellyfish. Acoustic technology using quantitative echosounders is one method of studying the distribution and abundance of jellyfish. Such methods are commonly used worldwide because they have the advantage of providing substantial information about all water layers in a wide area in a short time. However, in order to conduct an acoustic survey, the acoustic characteristics of the target organism must be known. These can be altered by a number of factors, including pulsation, swimming angle, frequency and size. Accordingly, this study determined the variation in target strength according to pulsation of N. nomurai. Data were analyzed for two jellyfish with bell diameters in air of (a) was 32.0 and (b) 25.0 cm. The pulsation cycle of jellyfish (a) was 1.5~2.0 sec and the target strength (TS) cycle was 1.0~2.5 sec, while jellyfish (b) had a pulsation cycle of 1.0~1.5 sec and TS cycle of 1.0~3.0 sec. The variation width of the TS with the change in pulsation was 7.8 dB (-72.4~-64.6 dB) for jellyfish (a) and 10.3 dB (-71.6~-61.3 dB) for jellyfish (b). The variation in bell diameter was about 0.28 and 0.35, respectively. These results confirmed that the variation in bell diameter caused by pulsation is closely related to the variation in TS.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.2
• /
• pp.172-182
• /
• 2020

In order to offer specific information needed to assist in operation of a ship with same type rudder through evaluating the maneuverability of training ship A-Ra with flapped rudder, sea trials based full scale for turning test, zig-zag test with rudder angle 10° and 20°, and spiral test at service condition were carried out on starboard and port sides around Jeju Island according to the standards of maneuverability of IMO. As a result, the angular velocity of port turn was higher than that of starboard turn. Therefore, the size of turning circle was longer on the starboard side. In addition, variation of the transfer due to various factors was more stable than those of the others. In the Z-test results, the mean of 1st and 2nd overshoot angles were 9.8°, 6.3° and 15.3°, 9.2° respectively when the port and starboard was 10°; the 1st overshoot angle were 18°, 13.7° when using 20°. Her maneuverability index T' and K' can be easily determined by using a computer with the data obtained from Z-test where K' and T' are dimensionless constants representing turning ability and responsiveness to the helm, respectively. In the Z-test under flap rudder angle 10°, the obtained K' value covered the range of 2.37-2.87 and T' was 1.74-3.45. Under the flap rudder angle 20°, K' and T' value showed 1.43-1.63, 1.0-1.73, respectively. In the spiral test, the loop width was unstable at +0.3° and -0.5°-0.9° around the midship of flap rudder. As a result, course stability was comparatively good. From the sea trial results, training ship ARA met the present criterion in the standards of maneuverability of IMO.

• Journal of Korean Society on Water Environment
• /
• v.31 no.2
• /
• pp.120-133
• /
• 2015

Due to increasing impervious surfaces resulting from urbanization and industrialization which are directly linked to urban inundation and non-point pollutants runoff, there is a need to manage them systematically. A management over urban impervious surfaces calls for pervious/impervious maps, which enable viewing the distribution of impervious surfaces. Nevertheless, relevant data are absent as now. In this respect, despite the diversity of proposed methods, pilot implementation and accuracy verification have never been conducted. Therefore, this study is aimed to produce a pilot pervious/impervious map based on previously proposed methods and to elucidate its pros and cons with a view to proposing a method for producing a GIS-based optimal pervious/impervious map. Following previously proposed methods, a pervious/impervious map of Bupyeong-gu, Incheon was produced. Then, a method of producing optimal pervious/impervious maps applicable to urban areas was proposed through the comparison of pros and cons of relevant spatial data. As a result, the map had been confirmed 99.2% of classification accuracy. Based on the present findings, future studies should establish a standardized method for producing. Also, this method should be used to produce pervious/impervious maps of other regions so that it can be applied to managing impervious surfaces in major urban areas nationwide.

• The Korean Journal of Physiology and Pharmacology
• /
• v.13 no.5
• /
• pp.379-383
• /
• 2009

Nitric oxide (NO), a diffusible gas, is produced in the central nervous system, including the spinal cord dorsal horn and the trigeminal nucleus, the first central areas processing nociceptive information from periphery. In the spinal cord, it has been demonstrated that NO acts as pronociceptive or antinociceptive mediators, apparently in a concentration-dependent manner. However, the central role of NO in the trigeminal nucleus remains uncertain in support of processing the orofacial nociception. Thus, we here investigated the central role of NO in formalin (3%)-induced orofacial pain in rats by administering membrane-permeable or -impermeable inhibitors, relating to the NO signaling pathways, into intracisternal space. The intracisternal pretreatments with the NO synthase inhibitor L-NAME, the NO-sensitive guanylate cyclase inhibitor ODQ, and the protein kinase C inhibitor GF109203X, all of which are permeable to the cell membrane, significantly reduced the formalin-induced pain, whereas the membrane-impermeable NO scavenger PTIO significantly enhanced it, compared to vehicle controls. These data suggest that an overall effect of NO production in the trigeminal nucleus is pronociceptive, but NO extracellularly diffused out of its producing neurons would have an antinociceptive action.

• Fisheries and Aquatic Sciences
• /
• v.20 no.10
• /
• pp.24.1-24.8
• /
• 2017

The experiment was conducted to investigate the effects of different algae in diet on growth, survival, and interleukin-10 productions of sea cucumber. At first, a 9-week feeding trail was conducted to evaluate the growth performance and survival of the sea cucumber fed one of the six experimental diets containing ST (Sargassum thunbergii), UL (Ulva lactuca), UP (Undaria pinnatifida), LJ (Laminaria japonica), SS (Schizochytrium sp.), and NO (Nannochloropsis oculata) in a recirculating aquaculture system. The result showed that survival was not significantly different among the dietary treatments, and the specific growth rate (SGR) of sea cucumber fed the UL diet ($1.58%d^{-1}$) was significantly higher than that of sea cucumber fed the other diets (P < 0.05), except for the LJ and NO diets. Secondly, interleukin (IL)-10 gene expression was determined where mice splenocytes were stimulated with $10{\mu}g\;ml^{-1}$ of sea cucumber extracts for 2 h. The result showed that IL-10 gene expression levels were significantly increased in UL, LJ, and NO diets fed sea cucumber extracts compared to other experimental diets. The results suggest that dietary inclusion with Ulva lactuca, Laminaria japonica, and Nannochloropsis oculata algae may improve the growth of juvenile sea cucumber and could upregulate IL-10 gene expression in mice splenocytes. Such detailed information could be helpful in further development of more appropriate diets for sea cucumber culture.

• Journal of International Society for Simulation Surgery
• /
• v.2 no.1
• /
• pp.13-16
• /
• 2015

Purpose We conducted a study on the reconstruction of the head's shape in 3D using the ToF depth sensor. A time-of-flight camera (ToF camera) is a range imaging camera system that resolves distance based on the known speed of light, measuring the time-of-flight of a light signal between the camera and the subject for each point of the image. The above method is the safest way of measuring the head shape of plagiocephaly patients in 3D. The texture, appearance and size of the head were reconstructed from the measured data and we used the SDF method for a precise reconstruction. Materials and Methods To generate a precise model, mesh was generated by using Marching cube and SDF. Results The ground truth was determined by measuring 10 people of experiment participants for 3 times repetitively and the created 3D model of the same part from this experiment was measured as well. Measurement of actual head circumference and the reconstructed model were made according to the layer 3 standard and measurement errors were also calculated. As a result, we were able to gain exact results with an average error of 0.9 cm, standard deviation of 0.9, min: 0.2 and max: 1.4. Conclusion The suggested method was able to complete the 3D model by minimizing errors. This model is very effective in terms of quantitative and objective evaluation. However, measurement range somewhat lacks 3D information for the manufacture of protective helmets, as measurements were made according to the layer 3 standard. As a result, measurement range will need to be widened to facilitate production of more precise and perfectively protective helmets by conducting scans on all head circumferences in the future.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.4
• /
• pp.77-90
• /
• 2015

This study is to designed to provide foundation for knit design which can apply the thickness and flexibility of jacquard knit by analyzing and comparing mechanical properties of 7 types of jacquard (normal jacquard, bird's eye jacquard, floating jacquard, tubular jacquard, ladder's back jacquard, blister jacquard, transfer jacquard) widely used in knit design to achieve the results. The sample was projected by using 7 gauge and SES-122S type computer knitting machine house tooth pattern with two colors were applied to 7 types of jacquard using Acrylic/Wool(30%/70%) $2/50.5^{\prime}s{\times}4ply\;yarn$ by Shimaseiki MFG., Ltd computer knitting machine. The mechanical properties of 7 types of jacquard samples were measured using KES-FB (Kawabata Evaluation System for Fabric, Kata Tech Co. Ltd). HV(Hand Value) and THV (Total Hand Value) were calculated by using the formula of KN-402-KT and KN-301-WINTER respectively. The measurements were evaluated by 0-to-5 rating scale. As result, the floating jacquard was found to have excellent drape, making it suitable for express feminine silhouette with its most flexible and smooth touch. On the other hand, bird's eye jacquard is adequate for a suit jacket and coat regarding its excellent volume and flexibility. Blister jacquard and tubular jacquard are thick, heavy and stiff knit and both are suitable for simple box-style design. Ladder's back jacquard, however, is more appropriate for expressing the design of feminine charm and voluminous design. Based on the result of this study, it is supposed to provide basic information for development of knit industry regarding jacquard knit by designing the creative knit wear with high production efficiency.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.4
• /
• pp.94-104
• /
• 2004

This study creates the LCP (Landscape Control Point) through the survey of spot sites for the quality of landscape assessment, which is based on an objective and departmentalized data base; the landscape assessment was achieved by production of weight value with the AHP (Analytic Hierarchy Process) technique, selection of requisites for the landscape assessment with the IVERSON method and visual area analysis with GIS (Geographic Information System). Futhermore, validity of the landscape assessment was verified by analysis of the correlation between physical amount and aesthetic amount. The purpose of this study is to suggest the basic essential data for landscape assessment and landscape planning by the characteristics of landscape based on verification of the suggested landscape assessment methods. The results of this study are summarized below. 1. In the adaptation of landscape assessment using GIS, the landscape assessment points of LCP 18, 17 and 16, which have more visible elements such as hill area, mountain area, and forest and farm land, were indicated to be higher than the others. In contrast, the landscape assessment points of LCP 13, 6 and 10, which have less visible elements, were relatively lower than the others. 2. In the visible preference measuring method, LCP 4, 14, and 16 showed high points of landscape assessment with 3.46, 3.4, and 3.18 each. With the more natural environments such as hill area, mountain area, and forest and farm land, higher results were shown. In contrast, LCP 7, 1, and 9 showed low points of landscape assessment with 2.24, 2.36, and 2.53 each. 3. In this study, a coefficient of 0.746 was gained by the analysis of correlation between the points of landscape assessment method and the points of visual preference from a slide show. This has 99 percent of probability in statistical data. 4. In conclusion, with the demonstration of the correlation between the landscape assessment method based on the AHP technique and the aesthetic amount (preference proportion), the practical use of landscape assessment can be demonstrated by the suggested landscape assessment method.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.605-607
• /
• 2015

The development of time-frequency analysis techniques allow astronomers to successfully deal with the non-stationary time series that originate from unstable physical mechanisms. We applied a recently developed time-frequency analysis method, the Hilbert-Huang transform (HHT), to two non-stationary phenomena: the superorbital modulation in the high-mass X-ray binary SMC X-1 and the quasi-periodic oscillation (QPO) of the AGN RE J1034+396. From the analysis of SMC X-1, we obtained a Hilbert spectrum that shows more detailed information in both the time and frequency domains. Then, a phase-resolved analysis of both the spectra and the orbital profiles was presented. From the spectral analysis, we noticed that the iron line production is dominated by different regions of this binary system in different superorbital phases. Furthermore, a pre-eclipse dip lying at orbital phase ~0:6-0:85 was discovered during the superorbital transition state. We further applied the HHT to analyze the QPO of RE J1034+396. From the Hilbert spectrum and the O-C analysis results, we suggest that it is better to divide the evolution of the QPO into three epochs according to their different periodicities. The correlations between the QPO periods and corresponding fluxes were also different in these three epochs. The change in periodicity and the relationships could be interpreted as the change in oscillation mode based on the diskoseismology model.

• Preventive Nutrition and Food Science
• /
• v.10 no.4
• /
• pp.357-363
• /
• 2005

The purpose of this study was to assess current food-handling practices of employees in school food service settings, as well as their knowledge levels, and identify relationships between knowledge, practices, and influencing variables. The survey was conducted for dietitians and employees in the school foodservice industry in Gyeongsangbuk-do province. A total of 270 and 570 questionnaires for dietitians and employees, respectively, were distributed by mail. Response rates were $62\%$ (N=171) and $66\%$ (N=376) from dietitians and employees, respectively. Data was analyzed using SPSS Windows (version 10.0). Descriptive statistics were used to summarize data. Pearson correlations were applied to test for relationships between knowledge and practice of HACCP principles. Stepwise regression analysis was performed to examine the influence of knowledge, current education guidelines, demographic information (working experience, academic background, and certification for food and cooking), and school characteristics (food production system, service style, and number of meals). School foodservice employees were found to have a significant amount of food safety knowledge ($67.5\pm1.8$ out of 100 possible points). Proper food handling practices were not always being followed in many schools. The relationship between their knowledge, current HACCP education training, and food handling practices was not significant. These results suggested the present situation of HACCP trainings performed by dietitians were inadequate for many school foodservice operations. The number of meals in school was an independent predictor of the employees' food-handling practices. These results suggest that an effective education program should integrate endeavors that take account of social and environmental influences on food safety to support the improvement of food-handling practices and the implementation of a HACCP program. Furthermore, dietitians should continue to provide consulting, training, and technical assistance to schools on HACCP implementation.