• Journal of Mechanical Science and Technology
• /
• v.17 no.12
• /
• pp.1894-1903
• /
• 2003

It is necessary to have a dummy that describes the anthropometry of a victim with accuracy. This study presents three scaled side impact dummies constructed for the use of MADYMO. They represent five, fifty and ninety-five percentile Korean males ranged from the age of 25 through 39. Thirty-five anthropometric data were used to scale input files required for MADYSCALE. Geometries, inertia, joints and other parameters for dummies were scaled based on the configurations of EuroSID-1. This study proposes the lateral impact response requirements for head, thorax and pelvis of Korean side impact dummies. A lateral drop impact test was conducted for the head at the height of 200 mm. Lateral pendulum impact tests were also carried out for thorax and pelvis at three specific impact velocities. All these test results were obtained from simulation based on MADYMO. All the procedures of the three tests followed the requirement of ISO/TR 9790.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.5
• /
• pp.18-31
• /
• 2022

To evaluate the impact of drought on agriculture in N. Korea, SPI (standardized precipitation index) analysis was carried out by utilizing time-series precipitation data during 1996 - 2003 when severe drought occurred throughout the country. The SPI value was estimated to reach 12 in approximately 60% of the total period, indicating that agricultural productivity deteriorated rapidly due to the long-term drought. The national average drought cycle, based on SPI 12, was estimated as 32.5 months for the last 40 years. However, when examined on 20-year basis, the drought cycle was shortened by 10.6 months in last 20 years (30.3 months) as compared to previous 20 years (40.9 months). Annual crop production continued to increase mainly in rice and maize until the mid-1990s, but declined sharply thereafter due to the drought. After the drought period, the production of potatoes of which growth is more resistant to drought started to increase to the production level comparable to those of rice and soybean. It is expected that changes in the agricultural production environment in N. Korea will be inevitable due to the climate change. To this end, using the results of the drought cycle analysis, it is possible to analyze the changes in the agricultural production environment in N. Korea in the future.

• Animal Bioscience
• /
• v.36 no.2
• /
• pp.322-332
• /
• 2023

Objective: We determined the impact of maintaining pasture-based dairy cows and calves together over 100 days on cow milk production, cow and calf behavior, and calf liveweight and carcass quality. Methods: Six Holstein-Friesian cows and their male calves were monitored for 106±8.6 days. Cows were temporarily separated twice a day for milking with calves remaining in the paddock. Cow and calf behaviors were recorded via scan sampling at 6 different timepoints, for the first 7 days and twice a week thereafter. Calves were weighed weekly and immediately processed for meat quality and rumen development analysis at 106±8.6 days. Daily cow milk yields were collected from enrollment until 109±8.6 days (3 days post-weaning). Results: The average daily gain of calves was 1.4±0.73 kg/d, with an average carcass dressing percentage of 59%. Calves had the greatest frequency of observed close proximity to cow and suckling in the first two weeks and decreased with experiment duration. During separation for milking, cow vocalizations and attempts to return to their calf decreased over time. Reticulorumen weight was on target for calf age, but as a proportion of total stomach weight was lower than industry averages of calves the same age due to the larger abomasum. Cows produced an average of 12±7.6 kg of milk yield per day over the 3-days before the calves were weaned and increased to mean of 31±8.3 kg/d the 3 days after weaning, indicating a consumption of close to 20 kg per calf per day. Conclusion: The impact of a pasture-based cow-calf rearing system on cow and calf behavior and the potential for high levels of calf liveweight gain when provided ad-libitum milk and feed were determined. Further research is required to determine the practicality of replicating such systems with large herds and impact on reared calves post-weaning.

• Journal of Korean Society for Quality Management
• /
• v.52 no.2
• /
• pp.287-301
• /
• 2024

Purpose: This paper aims to verify the difference in production resilience between local clusters and regions without clusters before and after a major crisis. Furthermore, this paper aims to identify the clusters' quality factors that impact clusters' shock vulnerability and resilience. Methods: Utilizing open-source data from the US Cluster Mapping platform, this paper compares regions with industrial clusters to those without using the Differences-in-Differences (DID) estimator. It considers the regions with industrial clusters as a treatment group and others as the control group, comparing the period before and after the pandemic. Additionally, the paper examines which cluster factors make a difference in economic resilience during the crisis using Regression Discontinuity Design (RDD). Results: The study finds that regions with industrial clusters show higher production resilience compared to regions without clusters. Moreover, the number of establishments, annual payrolls, and employment can have a positive impact on resilience during the pandemic shock. Conclusion: Though clusters could be vulnerable during the global crisis, industrial clusters can contribute to regional economic development and production resilience in the long-term aspect. Thus, it is required to construct a high-quality local cluster and support it during the economic crisis in the long-term aspect.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.31 no.4
• /
• pp.13-33
• /
• 2006

Using structural equation modeling, this study empirically examined the causal relationships among the level of advanced manufacturing technology (AMT), facilitation of alignment, the degree of strategic alignment of management eccounting Information systems (MAIS), and the improvement of production performance. The causal relationships between MAIS strategic alignment and information characteristics of MAIS were also investigated. The results showed that the level of AMT has a significant and positive impact on alignment facilitation. A significant causal relationship between alignment facilitation and MAIS strategic alignment was also found. It was shown that under high degrees of MAIS strategic alignment, MAIS must provide broad-scope and integrated types of Information. The causal relation-ships between MAIS strategic alignment and organizational performance were significant and positive. Thus, it is concluded that under high levels of AMT, a high degree of MAIS strategic alignment positively contributes to the improvement of production performance.

• Culinary science and hospitality research
• /
• v.13 no.4
• /
• pp.107-118
• /
• 2007

This research aimed to understand the relationship between comparative superiority elements of the supply chain activities for food supplies in the hotel industry. The samples are obtained from exclusive hotels located in the Seoul area. A statistic package program called SPSS was employed to conduct reliability analysis, factor analysis, t-test, correlation analysis, and multiple regression analysis. Results of a multiple regression analysis between supply chain management and food production strategies were as follows; company's characters and cooperative relations with suppliers had a significant impact on cost while quality was significantly affected by company's characters, information system, cooperative relations with suppliers, and supply chain activities. It was revealed that all factors had a significant impact on flexibility and delivery date.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.7
• /
• pp.1007-1016
• /
• 2018

USA beef production is characterized by a diversity of climates, environmental conditions, animal phenotypes, management systems, and a multiplicity of nutritional inputs. The USA beef herd consists of more than 80 breeds of cattle and crosses thereof, and the industry is divided into distinct, but ofttimes overlapping sectors, including seedstock production, cow-calf production, stocker/backgrounding, and feedlot. Exception for male dairy calves, production is predominantly pastoral-based, with young stock spending relatively brief portions of their life in feedlots. The beef industry is very technology driven, utilizing reproductive management strategies, genetic improvement technologies, exogenous growth promoting compounds, vaccines, antibiotics, and feed processing strategies, focusing on improvements in efficiency and cost of production. Young steers and heifers are grain-based diets fed for an average of 5 months, mostly in feedlots of 1,000 head capacity or more, and typically are slaughtered at 15 to 28 months of age to produce tender, well-marbled beef. Per capita beef consumption is nearly 26 kg annually, over half of which is consumed in the form of ground products. Beef exports, which are increasingly important, consist primarily of high value cuts and variety meats, depending on destination. In recent years, adverse climatic conditions (i.e., draught), a shrinking agricultural workforce, emergence of food-borne pathogens, concerns over development of antimicrobial resistance, animal welfare/well-being, environmental impact, consumer perceptions of healthfulness of beef, consumer perceptions of food animal production practices, and alternative uses of traditional feed grains have become increasingly important with respect to their impact on both beef production and demand for beef products. Similarly, changing consumer demographics and globalization of beef markets have dictated changes in the types of products demanded by consumers of USA beef, both domestically and abroad. The industry is highly adaptive, however, and responds quickly to evolving economic signals.

• Computers and Concrete
• /
• v.25 no.2
• /
• pp.111-118
• /
• 2020

The construction field must always explore sustainable ways of using its raw materials. Studying the environmental impact generated by reinforced concrete raw materials during their production and transportation can contribute to reducing this impact. This paper initially presents the carbon dioxide emissions from reinforced concrete raw materials, quantified per kilo of raw material and per cubic meter of concrete with different characteristic strengths, for southern Brazil. Subsequently, reinforced concrete elements were optimized to minimize their environmental impact and cost. It was observed that lower values of carbon dioxide emissions and cost savings are generated for less resistant concrete when the structural element is a beam, and that reductions in the cross section dimensions of the beams, sized based on the use of higher strength concrete, may not compensate for the increased environmental impact and costs. For the columns, the behavior differed, presenting lower values of carbon dioxide emissions and costs for higher concrete strengths. The proposed methodology, as well as the results obtained, can be used to support structural projects that have less impact on the environment.

• Phonetics and Speech Sciences
• /
• v.9 no.2
• /
• pp.69-76
• /
• 2017

The current study investigated whether Korean learners' English-learning environments, especially target English accent (General American English (GAE) vs. Southern British English (SBE)) and English-language experience affected their production of English vowels. Thirty six EFL learners, 27 ESL-US learners, and 33 ESL-UK learners produced 8 English vowels with a bVt frame (beat, bit, bet, bat, bought, bot, boat, boot). The learners' productions were acoustically analyzed in terms of F1 and F2 frequencies. The overall results revealed that the learners' target accent had an effect on their production of some English vowels. The EFL and ESL-US learners' (especially, female learners') production of bought, bot, boat, and boot, which show characteristic differences between the GAE and SBE accents, was closer to that of the native American English (AE) speakers than the native British English (BE) speakers. In contrast, the ESL-UK learners' production of bought and bot demonstrated the opposite pattern. Thus, the impact of target accent was not demonstrated across the board. The effect of the learners' different English-language experience was also rather limited. This was because the EFL learners' production was not much different from the ESL-US learners' production, in spite of the ESL-US learners' residence in the US for more than 9 years. Furthermore, the Korean learners, irrespective of their different English-language experience, tended to produce bit and bat with lower F1 than the native AE and BE speakers, thus resulting in bit and bat to be produced similarly to beat and bet, respectively. This demonstrates the learners' persistent L1 effects on their English vowel production despite the learners' residence in the English speaking countries or their high English proficiency.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.403-411
• /
• 2013

Horizontal construction projects such as oil and gas pipeline projects typically involve repetitive-work activities with the same crew and equipment from one end of the project to the other. Repetitive scheduling also known as linear scheduling is known to have superior schedule management capabilities specifically for such horizontal construction projects. This study discusses on expanding the capabilities of repetitive scheduling to account for the variance in production rates and visual representation by developing an automated alignment based linear scheduling program for applying temporal and spatial changes in production rates. The study outlines a framework to apply changes in productions rates when and where they will occur along the horizontal alignment of the project and illustrates the complexity of construction through the time-location chart through a new linear scheduling model, Linear Scheduling Model with Varying Production Rates (LSM_VPR). The program uses empirically derived production rate equations with appropriate variables as an input at the appropriate time and location based on actual 750 mile natural gas liquids pipeline project starting in Wyoming and terminating in the center of Kansas. The study showed that the changes in production rates due to time and location resulted in a close approximation of the actual progress of work as compared to the planned progress and can be modeled for use in predicting future linear construction projects. LSM_VPR allows the scheduler to develop schedule durations based on minimal project information. The model also allows the scheduler to analyze the impact of various routes or start dates for construction and the corresponding impact on the schedule. In addition, the graphical format lets the construction team to visualize the obstacles in the project when and where they occur due to a new feature called the Activity Performance Index (API). This index is used to shade the linear scheduling chart by time and location with the variation in color indicating the variance in predicted production rate from the desired production rate.