• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.296-300
• /
• 2015

This study was conducted to investigate optimal crop loads of 'Jinok' grape for unheated plastic house culture. The crop loads of 'Jinok' grapes were managed to be 1.3, 1.8, 2.2, 2.4, and 2.6t per 10a from 2012 to 2014. We measured vine growth and berry qualities. Crop loads were not significantly affected on plant height, trunk diameter, shoot length, and the internode length of 'Jinok'. However, the maturation of berries was delayed when the crop load was higher. And the harvest date was earlier about three weeks in an unheated plastic house compared to in an open field. The average berry weight was decreased by the higher crop load although higher crop loads made higher yields showing the lowest weight at 342g with the treatment of 2.6t per 10a and the highest weight at 363g with the treatment of 1.3t per 10a. Also, the soluble solids content showed a tendency that higher crop loads brought to lower degree Brix. The contents of P, K, Ca, and Mg in grape leaves and shoots were not significantly different by crop loads. To sum up, when crop loads were under the 2.4t per 10a, the berries were harvested as a marketable fruit having $15^{\circ}Brix$ in the cultivar 'Jinok' grape. This result could help to increase grower's benefit having improved quality of fruit for the sustainable production by the established cultivation techniques for the newly developed cultivar 'Jinok'.

• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.301-307
• /
• 2015

High quality transplants are critical for success in crop production. Increasing numbers of growers purchase their transplants from specialized transplant producers instead of growing their own transplants. A drawback of purchasing transplants is the risk of deterioration to transplants during transportation from transplant producers to the growers. This study evaluates the influence of temperature on the quality of grafted tomatoes transplants (Solanum lycopersicum cv. Super Doterang), in order to propose optimum temperature condition for the transportation of grafted tomato transplants. Grafted tomato transplants with visible flower trusses were exposed to different air temperature ($10^{\circ}C$, $25^{\circ}C$, or $40^{\circ}C$) for 2, 4, or 6 hours. After treatment, the NDVI (Normalized Difference Vegetation Index) values of tomato transplants treated at 25 and $40^{\circ}C$ were lower than that at $10^{\circ}C$. The root fresh weight was lowest at $40^{\circ}C$. After transplanting, the transplants that were exposed to the air temperature of $40^{\circ}C$ exhibited chlorosis and blight on lower leaves. The degree of damage on leaves was severer as the high temperature exposure time was longer. The temperature conditions during the transportation also influenced the growth, flowering and fruit set of tomatoes after transplanting. The fruit number and weight of first truss was lowest at $40^{\circ}C$ for 6 hours. Accordingly, it is recommended that the temperature during the transportation should be controlled and kept at the range from 10 to $25^{\circ}C$ even though the period is short (within as six hours) in order to maintain the quality of transplants.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.397-402
• /
• 2010

This study was conducted to find out the appropriate type and concentration of plant growth regulator for mass production of wild type Hydrangea serrata. And the optimal soaking time for rooting of the cuttings was also investigated. When the cuttings of Hydrangea serrata were cultivated for 6 weeks after immersing in $50mg{\cdot}L^{-1}$ of IBA for 3 hrs, the number of roots was 90.6. However the number was significantly decreased when the cuttings were treated with $10mg{\cdot}L^{-1}$ of IBA. The rooting ratio was 100% when the cuttings was immersed in 1,000, 2000 and $3000mg{\cdot}L^{-1}$ of NAA solution for 5, 3 and 10 sec., respectively. Despite the perfect rooting, the number of roots was decreased. The number of roots was 105.5 when the cuttings were treated in $2,000\;mg{\cdot}L^{-1}$ of NAA for 5 sec., which was the highest number in NAA treatment. Overall, the rooting ratio and growth was better when the cutting was treated with low concentration of IBA ($50{\sim}250\;mg{\cdot}L^{-1}$) than the treatment of NAA. And the most appropriate concentration and time fot the treatment of IBA was $50mg{\cdot}L^{-1}$ and 3 hrs, respectively.

• Journal of Bio-Environment Control
• /
• v.17 no.2
• /
• pp.116-123
• /
• 2008

This study was carried out to investigate into the effect of light-emitting diode (LED) for the light quality as a light source on the broccoli seed germination and the physiological activity of vegetable sprouts. We have also germinated seeds of the broccoli and applied LED as a light quality such as blue, green, red, white, yellow and red + blue color lights to their sprouts for 14 hours and kept dark for 10 hours at the temperature of $25^{\circ}C$ (day)/$18^{\circ}C$ (night). Broccoli sprouts were extracted by methanol and their physiological activities were examined. All broccoli seeds were germinated at 3 days after seeding regardless of the light color. Total sprout fresh weight were mostly became highest by 0.389g (10 plants) at 8 days after seeding when their sprouts were grown under blue color light. Total phenol compound contents in broccoli sprouts were extremely increased by $83.0\;mg{\cdot}L^{-1}$ under the white light, and total flavonoid contents were most much more by $72.6\;mg{\cdot}L^{-1}$ under the blue light. DPPH radical scavenging activity at $2,000\;mg{\cdot}L^{-1}$ were most highest by 93.5% in broccoli sprouts grown under the white light. Nitrite radical scavenging activity at the concentration of $500\;mg{\cdot}L^{-1}$ in sprout extracts were the most increased by 66.9% under the yellow light, and tyrosinase inhibition activity at $2,000\;mg{\cdot}L^{-1}$ in sprout extracts were by 14.5% under red light.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.249-254
• /
• 2016

This study was carried out to evaluate the efficiency of white shading agent for reduction of greenhouse air temperature and to develop cost-effective cooling strategies for strawberry seedling production during hot seasons. Experiment results showed that solar radiation ($W/m^2$) was reduced by 14~17% and 33~37% for 15% and 35% white wash shading treatments, respectively, in black shading net treatment solar radiation was reduced by 39~44% compared to non-shaded treatment. Measured greenhouse air temperatures in 15% and 35% white wash shading treatments were $38.4^{\circ}C$ and $36.5^{\circ}C$, respectively, whereas in black shading net covered greenhouses air temperature was $35.1^{\circ}C$, thereby 35% and 15% shading treatments showed 3.3 and $1.9^{\circ}C$ higher air temperatures than black net shading treatment. Crown diameter of strawberry plants in black net shading treatment was 7.5mm, and in 15% and 35% white wash shading treatments were 8.6mm and 8.3mm, respectively. Strawberry transplants grown in 35% white wash shading treatment produced the highest above ground fresh weight(7.8g), followed by 15% white wash shading(6.7g) and black net shading treatments(5.8g). Also, both 15% and 35% white wash shading treatments produced higher root fresh weight(4.1g and 4.3g) compare to black net shading treatments(2.7g).

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.334-342
• /
• 2016

In order to evaluate the modified installation methods of roof ventilation devices, derived from the previous experiment ('investigation into the optimum capacity of roof ventilation devices and their deployment'), the conventional and modified (improved) roof ventilation systems were installed in the single-span plastic greenhouse for growing oriental melons. The roof vents ($60{\varphi}$) and roof fans (maximum air capacity of $38m^3/min$) were installed in the spacing of 15m (FT, modified 'side vent+roof fan' ventilation) and 6m (TT, modified 'side vent+roof vent' ventilation) respectively on the roof of greenhouses for the modified roof ventilation treatments, and 20m (FC, conventional 'side vent+roof fan' ventilation) and 8m (TC, conventional 'side vent+roof vent' ventilation) for the conventional ones. The stem diameter, leaf blade lengh, petiole length, and leaf width were lower in the FT and TT treatments than those in the conventional treatments, FC and TC. Although the fruit weight and total yields were slightly lower in the FT and TT treatments, the marketable fruit ratio (%) were higher, as a result of increased fruiting ratio (%) in these treatments, than those of FC and TC. The marketable yields (kg/10a) in the FT and TT treatments were 8,391 kg/10a and 7,283 kg/10a, which were respectively 661 kg/10a and 487 kg/10a higher than those in the treatments of FC and TC. The modified installation methods of roof fan resulted in production of more female flowers and lower fruit drop ratio (%) compared to conventional meathods. In the treatment of the conventional ventilation with roof vent, the fruit weight, fruit length & width, and flesh thickness were higher than in other treatments, but there were no significant differences in the fruit width and flesh thickness among the treatments.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.232-239
• /
• 2016

The objective of this study was to examine the effect of photoperiod and light intensity of RBW LED (red:blue:white = 2:1:1) on the growth of Taraxacum coreanum Nakai in a fully artificial light type plant factory. 3 photoperiods and 4 light intensity were used respectively in a fully artificial light type plant production system. Plants were cultured with three photoperiods and four light intensity regimes (conditions) for 270 and 120 days, respectively, using nutrient film technique (NFT) or aeroponics culture methods. For each photoperiod, the total leaves per plant harvested 8 times in all cultivation period was 224 in the 16/8(day/light) photoperiod that had no significant difference from 220 in the 12/12 photoperiod and the lowest number of leaves was 151 occurred in the 8/16 photoperiod, which means that the longer photoperiod, the more leaves harvest. Total fresh weight of above ground was the high in order of in 16/8 photoperiod as 125g, 12/12 photoperiod as 91g, 8/16 photoperiod as 56g. For each light intensity, the total leaves per plant harvested 4 times in all cultivation period was the great in order of $150{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ as 123, $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ as 107, $100{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ as 95, $50{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ as 56 which was the smallest number of total leaves harvest. Total fresh weight of above ground per plant was the high in order of $150{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ as 43.6g, $100{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ as 34.6g, $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ as 32.2g, $50{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ as 18.2g. From these results, it was concluded that photoperiod of 16/8 and light intensity at $150{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ can be used as the light condition of RBW LED (red:blue:white = 2:1:1) for optimal growth of Taraxacum coreanum Nakai in a fully artificial light type plant factory.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.235-241
• /
• 2017

This study was carried out to estimate growth characteristics of Kimchi cabbage cultivated in two different growing seasons and three transplanting dates in the greenhouses, and to create a predicting model for the production of Kimchi cabbage based on the growth parameters and climatic elements. Kimchi cabbages were transplanted three times at intervals of two weeks in spring and autumn growing seasons. Sigmoidal models for the estimation of fresh weight (Fw) was designed with days after transplanting, which were Fw=4451.5/[1+exp{-(DAT-34.1)/3.6}]($R^2=0.992$) and Fw=7182.0/[1+exp{-(DAT-53.8)/11.6}] ($R^2=0.979$), respectively. The relationship between fresh weight of Kimchi cabbage and growing degree days (GDD) was highly correlated, and the regression model represented by Fw=4451.5/[1+exp{-(GDD-34.1)/3.6}] ($R^2=0.992$) in spring growing season. The yield of Kimchi cabbage under spring and autumn growing season were estimated 11348.3kg/10a and 15128.2kg/10a, respectively, which were much different than outdoor culture each growing season, while greenhouse cultivation have shown similar results. To estimate the efficacy of prediction yield in Kimchi cabbage, we will need to supplement a predicting model, which was based on the parameters and climatic elements by the field cultivation.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.368-377
• /
• 2017

This study investigated the possibility of application of the recently introduced cylindrical paper pot seedlings in hot pepper (Capsicum annuum L.) cultivation. The seedling growth, initial rooting after planting and accumulated fruit yield were investigated with the treatments of tray type (paper pot and plug) as a main factor, tray cell number (40 cell and 50 cell) as a sub-factor, and fertigation method (continuous fertigation and fertigation after 35 days sowing) as a sub-sub factor, respectively. The growth of pepper seedlings was significantly affected by tray type and fertigation method showing the highest value at 50 cell plug tray with continuous fertigation, and the effect of fertigation was greater than that of trays. 'Cheongyang', 'Daekwonseoneon' and 'Longgreenmat' cultivar showed all the same pattern in seedling growth. These three-cultivar seedlings were planted in plastic house and in open field in Jeonju area, respectively, and another 'Daekwonseoneon' seedlings raised Yeongyang local area was also planted at the same area. There was no difference in the rooting of 'Cheongyang' pepper at 2 weeks after planting in plastic house. The accumulated fruit weight was not significantly different between paper pot seedlings and plug seedlings in three cultivar grown in plastic house. However, that of 'Cheongyang' pepper showed higher at paper pot seedlings than plug seedlings and the other two cultivar were higher at plug seedlings in open field. 'Daekwonseoneon' pepper yield grown in open field in 'Yeongyang' area was not significant between paper pot seedlings and plug seedlings. In conclusion, the pattern of seedlings growth grown in the cylindrical paper pot was the same as those of the conventional plug seedlings and also fruit yield was similar between paper pot seedlings and plug seedlings even though minute difference among cultivars. These results suggest that pepper seedlings grown in paper pot should be highly applicable to pepper cultivation.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.3
• /
• pp.33-44
• /
• 2002

A field technique for assessing the transmissive fractures in an aquifer was applied to a fractured rock formation in Youngchun area Korea. Geological mapping and detailed acoustic borehole teleview(BHTV) logging were performed to obtain information about the fractures. The study area consists predominantly of two types of fractures. The fracture sets of low angle partings such as bedding and sheeting plains have strike N70-80$^{\circ}$W, 25$^{\circ}$-30$^{\circ}$SW and N3S$^{\circ}$W, 12$^{\circ}$NE, respectively. In areas of high fractures, on the other hand, the major fracture sets show strike N80$^{\circ}$W and dip 70$^{\circ}$-85$^{\circ}$SW, N10$^{\circ}$E.85$^{\circ}$SE in sedimentry rocks, N40-50$^{\circ}$E.85$^{\circ}$SE/85$^{\circ}$NE, N70$^{\circ}$E.80$^{\circ}$SE, and N7$^{\circ}$-75$^{\circ}$W.80$^{\circ}$SW in granites and volcanic rocks. Injection tests have been performed to identify discrete production zones and quantify the vertical distribution of hydraulic conductivity. The calculated hydraulic conductivities range from 3.363E-10 to 2.731E-6, showing that the difference between maximum and minimum value is four order of magnitude. Dominant section in hydraulic conductivity is extensively fractured. Geophysical logging was carried out to clarify characterization of the distribution of fracture zones. Transmissive fractures were evaluated through the comparison of the results obtained by each method. The temperature logs appeared to be a good indicator that can distinguish a high transmissive fractures from a common fractures in hydraulic conductivity. In numerous cases, evidence of fluid movement was amplified in the temperature gradient log. The fracture sets of N70-80$^{\circ}$W.60-85$^{\circ}$NE/SW N75-80$^{\circ}$W.25-30$^{\circ}$SW, N50-64$^{\circ}$W.60-85$^{\circ}$NE, N35-45$^{\circ}$E.65-75$^{\circ}$SE, and N65-72$^{\circ}$E.80$^{\circ}$SE/60$^{\circ}$NW were idenfied as a distinct transmissive fractures through the results of each tests.