• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.78-84
• /
• 2005

The development of eco-friendly low pressure carburizing system with high pressure gas quenching (LPC_GQ, 500kg/charge) led to new stage in the fundamental case-hardening treatments. This is due to its ability to provide tighter tolerances on the carburizing process with notable reductions in distortion of the carburized and hardened workpiece. This system is characteristics by high uniformity and reproducibility of heat treatment results, absence of an intergranular oxidation layer, carburizing of complex shapes, reduced cycle time, low operating costs, simplified production, eliminate post washing, and reduced grinding costs.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.37-42
• /
• 2006

The paper discusses the combined use of softwood and eucalyptus kraft pulps in the production of printing and writing papers. Looking for process and paper quality optimization, refining pilot plant trails were carried to identify the effects of refining type (mixed or separate) and intensities (specific edge load), and also furnish composition (amount of each pulp in mixture) on final paper quality and process costs. The basic effects on pulp fibers were evaluated against paper quality properties, such as physical strengths, bulk, vessel picking, opacity and porosity, as well as the interactions with papermaking process, such as estimates of paper machine runnability, paper breaks and industrial refining control. The results show that the furnish composition and the type of refining has a significant effect on properties related with both final paper quality and total costs. The best alternative for printing and writing papers was identified for mixed refining, under the lowest refining intensity, and with the highest dosage of eucalyptus pulp.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.4 no.1
• /
• pp.25-31
• /
• 1979

We consider the optimal ordering policy for a single-product two-stage inventory system where the main assumptions are as follows: (i) constant continuous demand only at stage 2, (ii) constant input (production) rate at stage 1, (iii) instantaneous delivery (transportation) from stage 1 to stage 2, (iv) backlogging is allowed only at stage 2, (v) an infinite planning horizon. Costs considered are ordering and linear holding costs at both stages, and linear shortage cost only at stages 2. By solving 9 different case problems, we have observed the general from of the optimal ordering policies for our model which minimizes the total cost per unit time. It is noticeable from this observation that the questionable but more often than not adopted assumption by many authors in determining the optimal potimal policy for multistage inventory systems, that the ordering (lot) sizes at each stage remain constant thruout the planning horizon, is not valid.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.871-878
• /
• 2000

Exergetic and thermoeconomic analysis were performed for a 500-MW combined cycle plant and a 137-MW steam power plant without decomposition of exergy stream of matter into thermal and mechanical exergies. The calculated costs of electricity are almost same within 0.5% as those obtained by the thermoeconomic method with decomposition of exergy into thermal and mechanical exergies of the combined cycle plant. However for the gas-turbine cogeneration plant having different kinds of products. the difference in the unit costs of products, obtained from the two methodologies is about 2%. Such outcome indicates that the level at which the cost balances are formulated does not affect the result of thermoeconomic analysis, that is somewhat contradictory to that concluded previously.

• Korean Journal of Organic Agriculture
• /
• v.17 no.4
• /
• pp.441-461
• /
• 2009

Switching to organic farming practices in agricultural production reaches the end of the period it takes an average of five years. During this period, agricultural soil management to improve the investment must be sustained. Results of the survey of environment-friendly agricultural lease rates appear to approximately 54.2% lower than agricultural practices. Environmentally friendly agricultural land is leased on a long transition period of the contract cost, many buried incompleteness, uncertainty of contract fulfillment(opportunistic behavior) occurs when the transaction costs. This ultimately can hinder the spread of organic farming. Thus, the qualitative development of organic farming and land leasing in order to minimize transaction costs, should that occur. The alternative 'cooperative long-term lease contract' is a system.

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.5
• /
• pp.262-269
• /
• 2006

The development of eco-friendly low pressure carburizing system with high pressure gas quenching(LPC-GQ, 500kg/charge) led to new stage in the fundamental case-hardening treatments. This is due to its ability to provide tighter tolerances on the carburizing process with notable reductions in distortion of the carburized and hardened workpiece. This system is characteristics by high uniformity and reproducibility of heat treatment results, absence of an intergranular oxidation layer, carburizing of complex shapes, reduced cycle time, low operating costs, simplified production, eliminate post washing, and reduced grinding costs.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.20 no.2
• /
• pp.21-26
• /
• 1983

In this light of economical engineering, the optimal configurations of ship structure that can save weights, production costs and operation costs should be investigated. This paper presents the general method of optimization based on non-linear programming and its application to weight and/or cost minimization of ship structure. Oil tanker is chosen as a ship type because of simple layout and easy calculation of stress. With the data of 16,200 DWT oil tanker built by KSEC 1980, this paper shows the procedure mentioned above by means of SUMT combined with two selected search methods. Then the differences between original and redesigned tanker structures are discussed.

• The Journal of Society for e-Business Studies
• /
• v.7 no.2
• /
• pp.143-156
• /
• 2002

The objective of supply chain planning is to satisfy the requirements for minimizing inventory costs, transportation costs, and lead times throughout the supply, production and distribution stage dispersed geographically. Therefore, the supply chain planning system should have functionalities to resolve complex optimization problems that have characteristics of multi-stage and multi-product. Ant the system should also support collaborative decision making among distributed business partners. In this study, we proposed a distributed architecture for the supply chain planning system. To do this, we analyzed functional requirements by using IDEF-0(ICAM Definition-0) methodology, defined required components, and designed each component by using object-oriented methodology. We implemented a prototype system based on CORBA (Common Object Request Broker Architecture) to show that the proposed distributed architecture based on component technology is feasible and can solve supply chain planning problem collaboratively.

• Environmental and Resource Economics Review
• /
• v.11 no.4
• /
• pp.633-657
• /
• 2002

This study presents a demand modelling for landfill gas, which is used as alternative energy source for district cooling business. By analyzing the cost minimizing behavior of producer facing with three alternative energy sources such as electricity, cooling heat water, and gas, a demand function for landfill gas is derived from the optimal operating time of gas fired production facility, and estimated using unpublished data, which are associated with Seoul city's development plan for Sang-am area. The estimation results repeals that Seoul City could supply the land-fill gas of 13.76 million cubic meters each year at the price of about 16 won per cubic meters. However, if the investment costs associated with installation of gas collecting facilities are treated as sunk costs, annual amount of gas supplied is expected to increase to 14.22 million cubic meters at a lower unit price of 14.76 won.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.201-213
• /
• 1998

We address the problem of choosing the most economic mean value for an automatic filling operation on a production line through the sampling inspection. If quality characteristic of a unit is less than inspection specification then the goods is not accepted. Otherwise, it is accepted. The lots that the numbers of non-conforming units in a sample are larger than the allowable number of non-conforming units are rejected. The non-conforming units in the rejected lots are separated by the screening inspection. The non-conforming units separated are sold in discount price. We assume that quality characteristic is larger-the-better characteristic, the distribution of quality characteristic is normal distribution, and the standard deviation of the distribution is known. This paper presents total expected profit function model considering sales revenue, inspection costs, and material costs. The manufacturing process mean value maximizing total expected profit is determined, and the results of the process target value and total expected profit is analyzed as coefficients change.