• Analytical Science and Technology
• /
• v.31 no.5
• /
• pp.179-184
• /
• 2018

Diphencyprone (DPCP) is frequently used as a compounded preparation in dermatology for the treatment of alopecia and recalcitrant warts based on the immune reaction of skin allergy. However, DPCP is a non-recognized agent in Pharmacopoeia, because there are no criteria or analytical method for quality control of its powder and formulation. DPCP is unstable under light irradiation because as it easily decomposes to diphenylacetylene (DPA). This study aims to develop a simultaneous HPLC analytical method for analyzing DPCP and DPA in the raw materials and compounded preparation. The method required a C18 column ($250{\times}4.6mm$, $5{\mu}m$) at $40^{\circ}C$ with a mobile phase of (A) 0.01 M phosphoric acid in water and (B) acetonitrile at UV 220 nm. DPA conversion to DPCP in the powder and compounded preparations was accelerated after light exposure for 60 min. In addition, this resulted in different patterns depending on the wavelength of light and the formulation. That is, DPCP in compounded preparation was more unstable than that in the powder. However, the DPCP formulation in amber bottles was observed to remain stable, although the measured concentrations of DPCP were somewhat different from the nominal concentration of the compounded preparations. The control of the exact concentration is required for effective disease treatment, depending on the state of the patient. In conclusion, these results will be useful for the recognition of DPCP in Pharmacopoeia and new DPCP formulation development to prevent photodecomposition.

• The Journal of Internal Korean Medicine
• /
• v.40 no.6
• /
• pp.1112-1121
• /
• 2019

Objectives: FDY003 is a raw material for medicine consisting of a natural product that is expected to have the advantages of low side effects and high efficacy. In this study, we predict the efficacy and the standardization of the drug by method validation of anticipated index compounds and the measurement of antioxidant activity. Methods: FDY003 is prepared by extracting and purifying 70% of ethyl alcohol (EtOH). The method validation of cordycepin and chlorogenic acid was determined by high-performance liquid chromatography-photo diode array (HPLC-PDA) and the content of FDY003 was calculated. In order to monitor the biological activity of FDY003, antioxidant activity was measured by 1,1-diphenyl-2-picrylhydrazyl (DPPH), 2,2-azino bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), and ferric-reducing antioxidant power (FRAP). The equivalent values of antioxidants such as trolox, ascorbic acid, gallic acid, and caffeic acid were measured by ABTS and FRAP. Results: Chlorogenic acid and cordycepin were both found suitable for method validation in HPLC and FDY003 containing 9.92±0.50 and 17.97±0.27 ㎍/g, respectively. In DPPH, the electron donating ability (EDA) value of FDY003 was increased in a concentration dependent manner. FDY003 confirmed antioxidant activity by ABTS and FRAP. Conclusions: FDY003 contains certain components including cordycepin and chlorogenic acid and has antioxidant ability by various mechanisms. Therefore, it is expected that FDY003 is capable of various physiological activities including anti-cancer activity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.571-571
• /
• 2012

We discovered the formation of C60 aggregates in solution by means of photoluminescence spectroscopic study on C60 in solutions. From the in-depth investigation of temperature dependence of the luminescence of C60 in toluene, benzene and CS2 solutions, we reported that the C60 aggregates are formed during cooling at the freezing temperature of these solvents. Furthermore, the C60 aggregates can be changed to stable structures by irradiating with UV pulse-laser (Nd:YAG laser, 355nm). As a consequence, we could obtain nano-scale photo-polymerized C60 clusters, which appear as round-shaped nano- scale particles in high resolution transmission electron-microscopy (HRTEM) images. However, the yield of the nano-scale C60 clusters obtained by this method is too small. So we designed and developed a system to obtain C60 cluster of macroscopic quantity by using ultrasonic nebulizer. In this system, C60 solution was vaporized to several micro-sized droplets in vacuum, resulting in the formation of C60 aggregates by evaporating solvent (toluene). The system was invented to produce nano-scale carbon clusters by the irradiation of UV light upon C60 aggregates in vacuum. We have characterized the products, C60 cluster, obtained from the system by using UV absorption spectra and HPLC spectra. Although the products have a possibility of inclusion various forms of C60 cluster, results support that the product formed from the system by using vaporizer method establishes a new method to obtain C60 cluster in macroscopic quantity. In the presentation, the details of the system and the results of characterization are reported.

• International Journal of Advanced Culture Technology
• /
• v.7 no.4
• /
• pp.125-136
• /
• 2019

The radish skin and radish greens are an edible part of the radish. But they are removed before eating the radish and used as a byproduct or an animal feed material because of their tough and rough texture. Melanin is a pigment that gives colour to our skin. But increased production of melanin can turn into benign or malignant tumours. These days due to global warming, the amount of Ultra violet (UVB) rays has been extensively increased with sunlight. Due to this, a phenomenon called exogenous photo aging is widely observed for all skin colour and types. As a result of this phenomenon, a set of enzymes called matrix metalloproteinases (MMP's) that serves as degradation enzymes for extracellular matrix proteins mainly collagen is increased, causing depletion in collagen and resulting in early wrinkles formation. Therefore in our study we used the murine melanoma cell line B16/F10 to study the melanogenesis inhibition by Heated radish extract (HRE) in vitro and we used HRM-2 hair less mice exposed to artificial UVB for checking the efficacy of Heated radish extract in vivo. Furthermore, we prepared a 3% Heated radish extract (HRE) cream and checked its effects on human skin. Our results have clearly demonstrated that Heated radish extract (HRE) have potently suppressed the tyrosinase activity and melanin production in B16/F10 cells. It had also reduced the expression of components involved in melanin production pathway both transcriptionally and transitionally. In in vivo studies, HRE had potently suppressed the expression of MMP's and reduced the wrinkle formation and inhibited collagen degradation. Moreover, on human skin, ginseng cream increased the resilience, skin moisture and enhanced the skin tone. Therefore in light of these findings, we conclude that HRE is an excellent skin whitening and antiaging product.

• The Research Journal of the Costume Culture
• /
• v.20 no.1
• /
• pp.72-82
• /
• 2012

The purpose of this research to look into formative characteristics of eco T-shirt design. Previous study researchers have mostly focused on overall eco fashion design, but on the other hand the research on eco product entity leaves much to be desired. We analyzed formative characteristics of eco T-shirt design that is easily accessible in real life and is easy to passing message. We selected 23 eco brands through internet and analyzed total 500 photos of eco T-shirt. Each photo was categorized by sex and the nations which belong to the eco fashion world associations. The content and statistical analysis was used for data analysis. The content of the research is as the following. First, it was found out that basic straight silhouette, achromatic color, human pattern, plant pattern, and eco-friendly organic material were used for the design of eco T-shirt. Second, it showed difference of silhouette, color, pattern according to nations. Third, it showed difference of silhouette, color, pattern according to sex. Fourth, symbolism of eco T-shirt was nature love, nature support, society ethicality, anti-sociality, and economics. This research aims for providing practical help and assistance to the development of eco T-shirt and its relevant industries.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.6
• /
• pp.716-721
• /
• 1999

It has been known that continuous cultivation of hairy root is difficult to maintain for a long period of time compared to the microbial and callus cultures. Chemostat cultivation was successfully carried out in order to economically produce a plant-based colorant, betacyanin, from red beet hairy root for more than 85 days in a 14-1 fermentor. The result from the chemostat cultivation was compared to those of the batch and fed-batch cultivations of red beet hairy roots. It was shown that hairy root reached its steady state within 50 days of the cultivation, and then maintained for about 25-30 days in a wide range of dilution rates. Total betacyanin production from the continuous process was also calculated to be 2.65g at 0.28(l/d) of dilution rate, compared to 0.196g from fed-batch cultivation. It was found that betacyanin production was a partially growth related process, yielding 0.376 mg/g-fresh wt. cell and $1.89{\times}10^{-5}$ mg/g-fresh wt. cell/d, with 0.92 of correlation factor in a partial growth-product model. It was also shown that the cell growth required was relatively large for maintenance amount of energy at a low dilution rate. The growth of hairy root was inhibited by high light intensity in following a photo-inhibition model. The growth parameters were estimated to be 0.3(l/d), $10.56kcal/\textrm{m}^2/h$,{\;}and{\;}35.81kcal/\textrm{m}^2/h$ for the maximum specific growth rate, half saturation light intensity, and inhibition light intensity, respectively.

• Journal of the Korean Chemical Society
• /
• v.54 no.3
• /
• pp.261-268
• /
• 2010

In this account, three synthetic methodologies that serve as the basis for new strategies for the preparation of selected natural products are briefly introduced. One process, involving ruthenium carbene catalyzed ring rearrangement metathesis developed by Grubbs and his coworkers, transforms alkene-tethered cycloalkenes to thermodynamically more favored alkene-tethered cycloalkenes. Another ruthenium carbene promoted reaction, referred to as dienyne metathesis, was uncovered in early studies by Grubbs and his collaborators. This process converts dienynes to fused bicyclic conjugated dienes. Finally, a novel photo-electrocyclization reaction of pyridinium salts, which leads to the formation of 4-aminocyclopenten-3,5-diol derivatives, is discussed. Examples are provided to show the utility of these methodologies in natural product synthesis. Emphasis is given to studies in which pyridinium salt photochemistry is coupled with ring rearrangement and dienyne metathesis in routes for the synthesis of polyhydroxyalted indolizidine alkaloids and the construction of the tricyclic core of the lepadiformine and cylindricine alkaloids.

• Journal of the Korean Geographical Society
• /
• v.51 no.6
• /
• pp.893-914
• /
• 2016

This paper describes the development of an inquiry-based fieldwork program based on Yangdong village where students explore the ways that it can develop in a sustainable way. Important considerations in an inquiry-based fieldwork design include what the key inquiry questions should be, the geographical issues of fieldwork location, the potential roles of mobile technologies, design of learning activities and a final product, and the roles of a teacher. Student fieldwork activities, including mapping land-use changes at the building level, detecting what should be changed or remain the same, and conducting interview with residents to examine their perceptions of overall tourism impacts, are supported by mobile technologies (i.e., the Collector for ArcGIS and the Google Forms). Twenty one high school students participated in a field test of the program in February 2016, which allowed authors to evaluate the program. Students' pre-, in-, and post-fieldwork activities were observed and the data and final products which they gathered and producted were analyzed. The post-program survey indicated that the students deepened and expanded their understanding of Yangdong village and expressed their satisfaction with the program in general. Incorporating mobile technologies into inquiry-based geographical fieldwork can help students involved in collaborative problem solving and creative activities in real world settings and create a shareable multimodal product combining maps, photo, and text.

• Journal of Intelligence and Information Systems
• /
• v.19 no.4
• /
• pp.147-157
• /
• 2013

With the advent of the digital environment that can be accessed anytime, anywhere with the introduction of high-speed network, the free distribution and use of digital content were made possible. Ironically this environment is raising a variety of copyright infringement, and product images used in the online shopping mall are pirated frequently. There are many controversial issues whether shopping mall images are creative works or not. According to Supreme Court's decision in 2001, to ad pictures taken with ham products is simply a clone of the appearance of objects to deliver nothing but the decision was not only creative expression. But for the photographer's losses recognized in the advertising photo shoot takes the typical cost was estimated damages. According to Seoul District Court precedents in 2003, if there are the photographer's personality and creativity in the selection of the subject, the composition of the set, the direction and amount of light control, set the angle of the camera, shutter speed, shutter chance, other shooting methods for capturing, developing and printing process, the works should be protected by copyright law by the Court's sentence. In order to receive copyright protection of the shopping mall images by the law, it is simply not to convey the status of the product, the photographer's personality and creativity can be recognized that it requires effort. Accordingly, the cost of making the mall image increases, and the necessity for copyright protection becomes higher. The product images of the online shopping mall have a very unique configuration unlike the general pictures such as portraits and landscape photos and, therefore, the general image watermarking technique can not satisfy the requirements of the image watermarking. Because background of product images commonly used in shopping malls is white or black, or gray scale (gradient) color, it is difficult to utilize the space to embed a watermark and the area is very sensitive even a slight change. In this paper, the characteristics of images used in shopping malls are analyzed and a watermarking technology which is suitable to the shopping mall images is proposed. The proposed image watermarking technology divide a product image into smaller blocks, and the corresponding blocks are transformed by DCT (Discrete Cosine Transform), and then the watermark information was inserted into images using quantization of DCT coefficients. Because uniform treatment of the DCT coefficients for quantization cause visual blocking artifacts, the proposed algorithm used weighted mask which quantizes finely the coefficients located block boundaries and coarsely the coefficients located center area of the block. This mask improves subjective visual quality as well as the objective quality of the images. In addition, in order to improve the safety of the algorithm, the blocks which is embedded the watermark are randomly selected and the turbo code is used to reduce the BER when extracting the watermark. The PSNR(Peak Signal to Noise Ratio) of the shopping mall image watermarked by the proposed algorithm is 40.7~48.5[dB] and BER(Bit Error Rate) after JPEG with QF = 70 is 0. This means the watermarked image is high quality and the algorithm is robust to JPEG compression that is used generally at the online shopping malls. Also, for 40% change in size and 40 degrees of rotation, the BER is 0. In general, the shopping malls are used compressed images with QF which is higher than 90. Because the pirated image is used to replicate from original image, the proposed algorithm can identify the copyright infringement in the most cases. As shown the experimental results, the proposed algorithm is suitable to the shopping mall images with simple background. However, the future study should be carried out to enhance the robustness of the proposed algorithm because the robustness loss is occurred after mask process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.72-72
• /
• 2015

메모리 반도체 세계 시장 점유율 1위 뿐만 아니라 국내 전체 산업 가운데 가장 중추적인 역할을 하는 반도체 산업의 지속적인 성장과 국가 경제의 발전을 위해서 소자 업체 뿐만 아니라 장비, 소재, 부품 산업의 동반 성장은 반드시 필요하다. 그 중에서 특히 소재, 부품 산업을 발전시키는 것이 국산 반도체 장비의 시장 점유율이 낮은 현 시점에서 가장 필요한 선택이다. 반도체 소재, 부품 산업의 발전을 위해서 제일 먼저 해야할 일은 영세한 국내 반도체 소재, 부품 산업을 활성화 시키는 것이며, 지속 적인 연구 개발, 성능 평가 방안 확보, 수요 업체와의 연계 방안 확보 등이 주요 현안이다. 반도체 소자 업체, 장비 업체에서 원하는 소재 및 부품의 성능을 만족하는 제품을 만들기 위해서는 우선 소재 및 부품의 기본 특성을 만족하는지에 대한 평가가 필요하고, 더 나아가서는 디바이스의 특성을 만족시켜줄 수 있는 한 단계 상향된 수요자의 요구 조건을 만족 시켜줄 수 있어야 한다. 본 연구에서는 그 중 특히 중요한 요소인 성능 평가에 대해서 논하고자 한다. 우선 반도체 공정용 소재에 대해서 살펴 보면 대표적인 반도체 소재로 증착용 Precursor, Photo Resistor, Sputter Target 등이 있다, 평가 방법으로는 ALD용 Precursor의 경우 대기 노출시 폭발, 화염 발생 등의 위험 요소를 안고 있어 특별한 주의가 요구 된다. PR이나 Sputter Target은 상대적으로 위험성은 적으며, 다양한 성능 평가 들이 가능하다. 다음으로 부품 평가에 대해서 살펴 보자. 본 원에서 가장 많이 진행된 부품 평가는 개발된 Pump의 성능 평가이다. 개발된 Pump는 1차적으로 KRISS 진공센터 에서 기본 Pumping 능력 평가를 실시하고, 다음으로 공정 평가를 실시한다. Pump마다 특성이 달라서 각 펌프의 성능 평가에 적합한 공정과 장비를 우선 선정하고 그에 합당한 공정을 진행하여 평가를 실시한다. 고 진공용인 Cryo Pump는 순수한 물질의 증착이 중요한 Metal Sputter 공정 장비에 장착하여 공정용 Gas를 흘리면서 Pump의 구동에 따른 성능 평가를 하고, 다음으로 실제로 Metal Sputter를 실시해서 Wafer에 증착된 물질의 특성을 확인한다. 다음으로 Turbo Pump의 경우 Etch 장비에 장착하여 Etch Uniformity, Etch Rate, By-product 배출 정도에 대해서 평가를 한다. Dry Pump는 비교적 공정 압력이 낮은 PECVD 공정 장비에서 평가를 진행 한다. 마지막으로 공정 진단, 챔버 상태 진단 등을 할 수 있는 별도의 부품 또는 장치로 PBMS, PCDS, OES 등의 평가에 대해서 논한다. 본 장치들은 실제 반도체 공정 장비와 환경에서 평가가 되어야지만 최종 사용자 입장에서 신뢰를 가지고 결과에 대해서 접근할 수 있다. 위에 논의된 장치들은 현재 공정 장비에 부착되어서 판매 되고 있는 것이 아니라 수요가 많지 않으나, 자체 성능 개선과 적합한 평가를 통해서 장치의 성능이 인정되면 300 mm 이상 Wafer 공정에서 반드시 필요한 실시가 공정 진단을 위해서 폭발적인 수요를 창출할 수 있으리라 본다.