• 한국세라믹학회지
• /
• 제27권8호
• /
• pp.956-956
• /
• 1990

석탄회의 탄소가 첨가된 질화반응시에 생성된 AIN, SiC 그리고 Si3N4 등의 생성물 분포를 반응온도, 시간 그리고 탄소의 첨가량에 따라 검토하였다. AIN의 조성은 시료입자가 작을수록 증가하였으며 반응온도 14500~1500℃와 약 2시간의 반응시간 그리고 약 30%의 탄소 첨가량 (시료무게 기준) 에서 최대값을 나타내었다. SiC와 Si3N4 조성변화는 서로 상반된 경향을 보였으며 반응온도가 낮고 반응시간이 작으며 그리고 탄소첨가량이 증가할 수록 SiC의 조성은 Si3N4 에 비하여 크게 나타났다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.76-81
• /
• 2004

Injection molding is the most widely used process fir the industrial forming of plastic articles. During an injection molding process of composites, the fiber-matrix separation and fiber orientation are caused by the flow of molten polymer/fiber mixture. As a result. the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation orientation and injection molding conditions. So far, there is no research on the measurement of fiber orientation using image processing. In this study, the effects of fiber content ratio and molding condition on the fiber orientation-angle distributions are studied experientially. Using the image processing method, the fiber orientation distribution of welding pars in injection-molded products is assessed. And the effects of fiber content and injection mold shapes on the fiber orientation in case of fiber reinforced polymeric composites are studied experimentally.

• 한국공작기계학회논문집
• /
• 제14권1호
• /
• pp.73-80
• /
• 2005

Injection molding is the most widely used process for the industrial forming of plastic articles. During an injection molding process of composites, the fiber-matrix separation and fiber orientation are caused by the flow of molten polymer/fiber mixture. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation orientation and injection molding conditions. So far, there is no research on the measurement of fiber orientation using image processing. In this study, the effects of fiber content ratio and molding condition on the fiber orientation-angle distributions are studied experimentally. Using the image processing method, the fiber orientation distribution of welding parts in injection-molded products is assessed. And the effects of fiber content and injection mold shapes on the fiber orientation in case of fiber reinforced polymeric composites are studied experimentally.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.677-683
• /
• 2003

Generally, heavy electronic products undergo many different types of shocks in transporting from a manufacturer to customers. Cushioning package materials are used to protect electronic products from severe shock environments. Since the mass distributions of heavy electronic products are usually unbalanced and complex, it is very difficult to design a cushioning package with haying high performance by considering only the equivalent stiffness of that. Therefore, when designing the cushioning material for a heavy electronic product, it is necessary to optimize its shape in order to maximize the cushioning performance. In this study, it is focused on designing an optimal shape of cushioning material for a large-sized refrigerator and an efficient design method is suggested by using a dynamic finite element analysis. As the results of this study, the optimal shape of cushioning material, which has high cushioning performance and minimized volume, was obtained from the drop analysis and a optimization process. From free drop tests of a refrigerator, it was identified that the cushioning performance of the optimal package were improved up to 16 % and the volume of it was reduced in a range of 22 %.

• 환경위생공학
• /
• 제4권2호
• /
• pp.91-99
• /
• 1989

An anaerobic acidogenic fermentation experiment was carried out in order to investigate the distribution of volatile acid products and gas generations with varing temperatures and pH values. The experiment was carried out using $1\%$ glucose as substrate and a pair of 3.5 liter vessle as bench scale batch reactors. The reactors were operated for 7 days at 25, 30 and $35^{\circ}C$ and at pH values of 4.0, 4.5, 5.0, 5.5 and 6.0 at each temperature conditions. Major products at all experiment pH's at $35^{\circ}C$ were acetic acids and butyric acids which together composed around $90^{\circ}F$ of total product acids. At higher pH values at $35^{\circ}C$, propionic acid reached around $10\%$. At all experiment conditions, 52 to $55\%$ of generated gases comprised of hydrogen gas and 45 to $48\%$ of carbon dioxide. With temperature increase from 25 to $35^{\circ}C$, the production rate of acetic acid increased 2.9 fold, butyric acid 22 fold, hydrogen gas 2.0 fold and carbon dioxide gas 2.3 fold. Optimum reaction conditions for highest production of acetic acid and hydrogen gas was determined to be pH 5.5 at $35^{\circ}C$.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.922-934
• /
• 2014

In casting steels for offshore construction, manufacturing integral casted structures to prevent fatigue cracks in the stress raisers is superior to using welded structures. Here, mold design and casting analysis were conducted for integral casting steel. The laminar flow of molten metal was analyzed and distributions of hot spots and porosities were studied. A prototype was subsequently produced, and air vents were designed to improve the surface defects caused by the release of gas. A radiographic test revealed no internal defects inside the casted steel. Evaluating the chemical and mechanical properties of specimens sampled from the product revealed that target values were quantitatively satisfied. To assess weldability in consideration of repair welding, the product was machined with grooves and welded, after which the mechanical properties of hardness as well as tensile, impact, and bending strengths were evaluated. No substantive differences were found in the mechanical properties before and after welding.

• 전산구조공학
• /
• 제2권2호
• /
• pp.62-72
• /
• 1989

본 연구는 확률에 기초한 한국의 기본 설계풍속 추정을 위한 합리적인 방법을 제시하고 위험도에 기초한 전국의 설계풍속지도를 제안한다. 본 논문에서는 장기기록 지역의 계절풍 연 최대 풍속자료와 단기기록 지역의 계절풍 월 최대 풍속자료의 극치 Type I 분포 모형에 대한 적합성을 검토하였고, 극치 태풍 풍속 분포 추정에서는 Monte-Carlo 시뮬레이션을 이용하여 간접적인 해석방법이 적용되었다. 태풍과 계절풍에 대한 기본 설계풍속은 두개 분포의 적(product)으로 된 혼합모형에서 구한다. 본 연구 결과로부터 제안된 모형과 방법은 현재 한국에서 가용한 단기기록 풍속자료를 이용한 위험도에 기초한 기본설계풍속과 기본 설계풍속지도의 개발에 실용적인 도구로 활용 가능하다고 본다.

• 반도체디스플레이기술학회지
• /
• 제22권2호
• /
• pp.17-23
• /
• 2023

In semiconductor manufacturing processes, a cleaning process is important that can remove sub-micron particles. Conventional wet cleaning methods using chemical have limits in removing nano-particles. Thus, physical forces of a mechanical vibration up to 1 MHz frequency, was tried to aid in detaching them from the substrates. In this article, we developed a 1 MHz quartz megasonic for a bare wafer cleaning using finite element analysis. At first, a 1 MHz megasonic prototype was manufactured. Using the results, a main product which can improve a particle removal performance, was analyzed and designed. The maximum impedance frequency was 992 kHz, which agreed well with the experimental value of 986 kHz (0.6% error). Acoustic pressure distributions were measured, and the result showed that maximum / average was 400.0~432.4%, and standard deviation / average was 46.4~47.3%. Finally, submicron particles were deposited and cleaned for the assessment of the system performance. As a result, the particle removal efficiency (PRE) was proved to be 92% with 11 W power. Reflecting these results, the developed product might be used in the semiconductor cleaning process.

• 응용통계연구
• /
• 제8권2호
• /
• pp.109-119
• /
• 1995

두 모집단에서 임의로 관측중단도니 두 표본을 얻었을 때, 두 모집단의 분포가 같다는 가설을 검정하기 위한 카이제곱 검정방법이 제안되었다. 여기서 제안된 통계량은 대립가설이 두 모집단의 분포가 같지 않다는 양측가설일 때 쓰일 수 있다. 귀무가설이 사실일 때 제안된 통계량의 극한분포는 카이제곱 분포가 된다. 두 가지 형태의 카이제곱 검정통계량이 제안되었는데, 하나는 product-limit 추정치로부터 얻은 관측된 칸(cell) 확률의 차이들의 벡터의 이차형식으로 표현된 것이고, 다른 하나는 간단한 합의 모양으로 표현된 것이다. 두 형태의 검정통계량을 사용하여 암치료를 위한 화학요법 실험으로부터 얻은 자료를 분석하여 보았다.

• 청정기술
• /
• 제17권1호
• /
• pp.56-61
• /
• 2011

감압잔사유를 고압 회분식 반응기에 넣고, 상용 Ni-Mo/$Al_2O_3$ 촉매를 이용하여 $450^{\circ}C$, $500^{\circ}C$에서 수첨분해하였다. 그리고 반응 생성물을 단증류 혹은 GC-SIMDIS 방법으로 각각 분석하였다. 먼저 수첨분해반응에서는 두 온도 조건 모두 촉매 반응뿐만 아니라 열분해 반응도 같이 일어나고 있음을 확인하였고, 온도가 증가할수록 전환율이 증가하고, 생성물 중 가솔린 및 납사 비율이 높아졌다. 생성물 분석 결과, $500^{\circ}C$ 반응에서는 단증류와 GC-SIMDIS 분석 결과의 차이가 없었지만, $450^{\circ}C$ 반응에서는 단증류에서는 디젤이, GC-SIMDIS에서는 vacuum gas oil이 주 생성물로 드러났다. 이는 $450^{\circ}C$ 반응에서의 단증류 분석은 단증류에 의한 열분해 반응으로 인해 생성물의 선택도가 정확하지 않음을 알려준다.