• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.39-46
• /
• 2015

A outdoor termination installed at the outdoor substation is required to connect undergroud cables and overhead transmission lines. The joint box for AC transmission system is already developed and widely used to interconnect overhead and undergroud systems. But the development of the joint box for DC transmission system was only introduced from China and Japan, but theire developemnt staus and core technologies were not fully reported. In order to implement HVDC systems connecting ovehead transmission lines and undergroud cables, a outdoor termination should be developed, but the detailed specifications and information of this device were not reported. It is estimated that the development of the joint box for DC environment has some technical obstacles including insulating materials, electric field mitigation, thermal temperature rise, and space charge accumuations. Among this, the most important one is the DC elctrical insualtion design. Therefore, in order to investigate the DC elctrical insualton design of outdoor termination, the design of AC slip-on type outdoor termination is reffered, and DC electric field analysis performed to verify the possiblity of application of AC joint box into DC joint box. Especially for DC electric field analysis, temperature rise of insualting materials of a joint box was considered, because the conductivity of materials could be changed due to temperature rise. Furthermore, DC electric field analysis considering transinet state, and polarity reversal state were also investigated to verify which state is the most severe condition for the DC joint box. From the simualtion resulsts, it was shown that the value and the position of maximum electric field was obtained comparing AC state, DC state without temperaure rise, and DC state with temperaure rise. And it was confimred that severe DC electric field was observed considing temperaure rise. Finally, in order to reduce DC eletric field intensifation, different configuration of the joint box was applied and it was not possible to obtain satisfactory results. It means that the slight change of configuration of AC joint box was not the suitable soluton for DC joint box. It is essential to establish novel DC insulaton design skills and method for DC joint box to commercialze this product in the near future.

• Science of Emotion and Sensibility
• /
• v.15 no.4
• /
• pp.553-564
• /
• 2012

Tangible user interfaces have been developed in the area of Human-Computer Interaction for the last decades, however, the applied domains recently have been extended into the product design and interactive art. Tangible User Interfaces are the combination of digital information and physical objects or environments, thus they provide tangible and intuitive interaction as input and output devices, often combined with Augmented Reality. The research developed a design guideline for tangible user interfaces based on key properties of tangible user interfaces defined previously in five representative research: Tangible Interaction, Intuitiveness and Convenience, Expressive Representation, Context-aware and Spatial Interaction, and Social Interaction. Using the guideline emphasizing user interaction, this research evaluated installation in a science museum in terms of the applied characteristics of tangible user interfaces. The selected 15 installations which were evaluated are to educate visitors for science by emphasizing manipulation and experience of interfaces in those installations. According to the input devices, they are categorized into four Types. TUI properties in Type 3 installation, which uses body motions for interaction, shows the highest score, where items for context-aware and spatial interaction were highly rated. The context-aware and spatial interaction have been recently emphasized as extended properties of tangible user interfaces. The major type of installation in the science museum is equipped with buttons and joysticks for physical manipulation, thus multimodal interfaces utilizing visual, aural, tactile senses etc need to be developed to provide more innovative interaction. Further, more installation need to be reconfigurable for embodied interaction between users and the interactive space. The proposed design guideline can specify the characteristics of tangible user interfaces, thus this research can be a basis for the development and application of installation involving more TUI properties in future.

• Journal of Korean Home Economics Education Association
• /
• v.34 no.3
• /
• pp.1-23
• /
• 2022

This study examined the perceptions of Myanmar university students and professors regarding the status and necessity of higher education programs in fashion. Data were collected from professors in textile engineering at Yangon Technological University and Myanmar university students. Closed- and open-ended questions were asked either through interviews or by email. The responses were analyzed using keyword extraction and categorization, and descriptive statistics(closed questions). Generally, the professors perceived higher education, as well as the cultural industries including art and fashion, as important for Myanmar's social and economic development. According to the students interests in pursuing a degree in textile were limited, despite the high interest in fashion. Low wages in the apparel industry and lack of fashion degrees that meet the demand of students were cited as reasons. The demand was high for educational programs in fashion product development, fashion design, pattern-making, fashion marketing, branding, management, costume history, and cultural studies. Students expected to find their future career in textiles and clothing factories. Many students wanted to be hired by global fashion brands for higher salaries and training for advanced knowledge and technical skills. They perceived advanced fashion education programs will have various positive effects on Myanmar's national economy.

• The Journal of Industrial Distribution & Business
• /
• v.11 no.8
• /
• pp.39-49
• /
• 2020

Purpose: Current study aimed at exploring the roles of system justification in the effects of consumers' self-identification with the threatened social in-group on the within-domain versus across-domain consumption. It focused on whether there are positive effects of both of the self-definition and the self-investment on the in-group system justification, and also explored whether the system justification, in turn, could make positive effects on the consumption. Research design, data and methodology: The self-identification was approached in view of self-definition and self-investment when the in-group was threatened by members of their out group. The empirical study was performed with the single factor within-subject design based on the feeling of the consumers' being threatened when the in-group was criticized by the others. The in-group threatened was accessed from the memory of each of the undergraduate students participating in the empirical study by asking them to remember the events by which their important in-group was perceived to be threatened in their past life. Questionnaire data collected from the undergraduate students were used to verify research hypotheses by structural equation model in Amos 21.0 program. Results: First, the self-definition positively affected the within-domain versus across-domain consumption, but did not affect the in-group system justification. Second, the self-investment positively affected the in-group system justification. Third, the system justification made positive effects on the within-domain versus the across-domain consumption. Therefore, this article could contribute to the development of the theory related to compensatory consumption in the view that there could be the positive mediation roles of system justification in the effects of consumers' self-investment to their in-group on the within-domain versus across-domain consumption when the in-group is threatened. Conclusions: The results of this study could give managerial implications to brand or product marketing managers. How to vitalize consumers' self-definition with, and self-investment to, the threatened in-group is at issue to the marketers when consumers' important in-group was threatened by others. By evoking the in-group-based self-investment to consumers when the in-group was threatened, the marketers should increase the level of the system justification, and the marketers should promote the consumers to recognize that their products or brands are included into the within-self domain.

• International Journal of Costume and Fashion
• /
• v.13 no.1
• /
• pp.23-34
• /
• 2013

The purpose of this study is to better understand the development and characteristics of knitwear fashion design by examining the transformation process of the modern knits. The subjects of the study are Missoni, Sonia Rykiel, and Azzedine Alaia, designers who are world-renowned knit designers, and the expressive techniques in their designs will be evaluated. The study also intends to analyze the aesthetic value of each designer's style through their product's silhouette, colors, and knitting techniques. On the basis of the analysis, we hope to research the factors in the designing process that will allow knits, which were made for practical purposes, to be valued as a luxury fashion item, and with the results, show the potential for knits in expanding its domain in fashion to become a more luxurious, creative fashion item. The characteristic comparison of the designers is as follows: First, in the case of colors, Missoni shows its distinct identity through a balance of splashy colors as well as nature-inspired color composition and balance. And, only with color use, is also able to express perspective, form composition, and rhythm. Sonia Rykiel designs are composed of black backgrounds with strong primary colors that are contrasted with one-point or stripes to express a light, urban image. Alaia emphasizes femininity by the use of black and white colors, which show modernity, in combination with neutral skin-toned colors, such as beige and gray. So, in other words, Missoni and Sonia Rykiel mixed colors for visual interconnectivity, while Alaia expressed femininity through the use of an achromatic color. Second, in the case of knitting techniques, Missoni uses the jacquard technique to make complex patterns that show balance of colors and patterns such as zigzag, stripe, geometries, and titan check, which are geometric, abstract, and symmetric. Sonia Rykiel who uses stripes as her trademark, most often utilizes the intarsia technique, which is expressed through one-point. Alaia combines diverse techniques, such as the Skashi weaving, by using computerized knitting. Third, as for silhouettes, Missoni eliminated exaggerated details in order to emphasize the flashy colors and delicate patterns and weavings of its designs, and this resulted in simplistic and relaxed silhouettes. Sonia Rykiel took advantage of the elasticity that the knit offers to get a tight silhouette, and in turn, emphasized the female sensuality. Alaia used curvilinear cuts that emphasized the womanly curves and gained an image considered soft and feminine.

• Science of Emotion and Sensibility
• /
• v.10 no.2
• /
• pp.177-186
• /
• 2007

The purposes of this study were to investigate consumer's needs for golf wear and to suggest a direction of product development and planning, based on the analysis of golfer's needs. The subjects used for the research were 150 male and female golfers who were in golf practice fields. The data were analyzed by frequency analysis, factor analysis, ANOVA, t-test and Duncan test. In summary, the results of this study were as followers; Dimensions of consumer's needs for golf wear were extracted from factor analysis as following properties; fashion/design property, textile property, hygiene property, body-shaped property. The most important consumer's need for golf wear was "wearing comfort" and second one was "moisture absorbency" Respondents evaluated that wearing comfort, stretchability, tactile, size of golf wear were very important but price, pilling, shrinkage or color-fading after laundry of golf wear were relatively less important. The evaluation of consumer's needs for golf wear according to demographic information had significant difference. The female golfers were found to consider that fiber characteristics, easy-to-laundry, wrinkle resistance, stretchability, sewing quality were relatively more important, when compared with the male golfers. Also, There were significant differences on the evaluation of consumer's needs for golf wear on fiber characteristics, stretchability, brand name between age groups.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.469-475
• /
• 2017

Software reliability is one of the most basic and essential problems in software development. In order to detect the software failure phenomenon, the intensity function, which is the instantaneous failure rate in the non-homogeneous Poisson process, can have the property that it is constant, non-increasing or non-decreasing independently at the failure time. In this study, was compared the reliability performance of the software reliability model using the Landely lifetime distribution with the intensity function decreasing pattern and Erlang lifetime distribution from increasing to decreasing pattern in the software product testing process. In order to identify the software failure phenomenon, the parametric estimation was applied to the maximum likelihood estimation method. Therefore, in this paper, was compared and evaluated software reliability using software failure interval time data. As a result, the reliability of the Landely model is higher than that of the Erlang distribution model. But, in the Erlang distribution model, the higher the shape parameter, the higher the reliability. Through this study, the software design department will be able to help the software design by applying various life distribution and shape parameters, and providing software reliability attributes data and basic knowledge to software reliability model using software failure analysis.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.2
• /
• pp.145-149
• /
• 2003

Manufacturing facilities of the pharmaceuticals must meet certain level of the cleanness required so that foreign substances such as dust, moisture, heat, microorganism, or virus do not contaminate the product. In case of radiopharmaceuticals for medical treatment and diagnosis, not only should the operators and environment be protected from radiation but also need to be isolated from the foreign contaminant. Therefore, manufacturing facilities for radiopharmaceuticals must satisfy the design standards of both hot cell and clean room which are specified by GMP. However, standards of maintaining negative pressure for preventing spread of radioactive contaminant in isolated facilities conflict with the standards of maintaining positive pressure for keeping cleanness. To solve this problem, air pressure of hot cell was designed lower than in the adjacent area to meet standards of the radiation safety. To keep higher cleanness in certain part of the hot cell for filling, minimal relative positive pressure allows. In order to effectively maintain the cleanness that is required for production of Tc-99m generator, which takes 70% of whole demand of radiopharmaceuticals, the rooms placed in each side of production room are used as a buffer area and three lead hot cells are installed in production room. In this research, we established the appropriate engineered design concept for Tc-99m generator manufacturing facility, which satisfies both GMP cleanness standard for preventing particles, bacteria, other contaminants and the regulations of radiation safety for supervising and controlling the amount of radiation exposure and exhausted radioactivity. And the concept of multi-barrier buffer zones is introduced to apply negative air pressure for hot cell with first priority and to continue relative positive air pressure for clean room.

• The Journal of the Korea Contents Association
• /
• v.4 no.4
• /
• pp.123-131
• /
• 2004

Internet is absolutely contributed to information technology revolution nowadays. Internet services such as voice and data, etc. are provided home or small office via home gateway. The development of communication equipment via home gateway is implemented rapidly, and its product various. This paper presents the design and implementation of the VoIP equipment including the telephone function based on the embedded environment and being connected to the home gateway and the PC because of taking 2-ethernet LAN ports. As developing environment, the STLC1502 developed at ST Microelectronics as single chip solution, VxWorks as RTOS, and C language as coding mechanism are used. The verification of the developed systems for the voice test is carried out for the gatekeeper via Internet. The performance parameter is considered as the call processing capacity measuring the time of the call setup and clearing, and the data processing capacity for the file transfer. As a call setup and clearing is about 95ms, the call processing capacity is about 10 calls per second. The data processing capacity is 5.7Mbps in case of file transfer of server and client environment. Therefore the performance result is satisfied in the aspect of the call processing time and the data transfer time in Internet.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.91-98
• /
• 2006

The product convergence and complex application environment raise the need of multi-modal interface which enables us to interact products through various human senses. The sense of vision has been used predominantly more than any other senses for the traditional and general information gathering situation, but in the future which will be developed based on the digital network technology, the practical use of the various senses will be desired for more convenient and rational usage of the information appliances. The sense of auditory which possibility of practical use is becoming higher than ever with the sense of vision, the possible usage will be developed broader and in the various ways in the future. Based on this situation, the characteristics of the written language and the colloquial language and the comparative analysis of the difference between male and female's reaction for each language were examined through this study. To achieve this purpose, the literature research about the diverse components of the language system was peformed. Then, some peculiar characters of the sense of vision and auditory were reviewed and the appropriate experimentation was planned and carried out. The result of the accomplished experimentation was examined by the objective analysis method. The main results of this study are as follows: first, the reaction time for written language is shorter than colloquial language, second, there is a partial difference between the male's and female's reaction for those two stimuli, third, there is no selection bias between the sense of sight and the sense of hearing. I think the continuous development of the broad and diverse ways of study for various senses is needed based on this study.