• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.23 no.3
• /
• pp.198-207
• /
• 1990

Among the biodegradable liquid waste treatment and disposal methods, ocean dumping is a cost-effective and productive manner considering reuse point of view However, when biodegradable liquid waste is dumped in the ocean, oxygen consumption by the decomposition of organic matter must be considered. The purpose of this study is to determine the maximum allowable concentration and dumping rate in the southern waters of the East Sea based on dissolved oxygen level. Streeter and Phelps' model has been used to determine the maximum allowable concentration. Factors in this model, deoxygenation constants and reaeration coefficients, have been determined by appling oxygen consumption method and closed system model. Deoxygenation constants and reaeration coefficients from surface to each standard depth are $0.24\~0.29/day\;and\;0.03\~0.39/day$ in summer, $0.17\~0.20/day\;and\;0.04\~0.56/day$ in winter, respectively. The allowable organic matter concentration($mgBOD/\iota$) to the dissolved oxy-gen sag value of $5mg/{\iota}$ is represented $17.23\times(H)^{-0.37}$ in summer, and $64.96\times(H)^{-0.52}$ in winter by mixing depth(H, m). Csanady's experiment has been applied to estimate the optimum dumping rate. The optimum dumping rate($R,\;m^3/sec$) can be written as a product of the beam(b, m) and the draft(h, m) of vessel, and biochemical oxygen demand of waste($L_n,\;mg/{\iota}$) $R=275{\times}bh^{0.63}L_n^{-1}$ in summer $=745{\times}bh^{0.48}L_n^{-1}$ in winter. The difference of dumping rate between in summer and winter is due to the oxygen distribution.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.3
• /
• pp.111-121
• /
• 2009

Value Engineering(VE) at design phase(so-called Design-VE) becomes quite a compulsory solution for better customer satisfaction, cost reduction, higher product performance, and, eventually, insured predominance in the competition. Unlike intended, however, the customer requirement on Design-VE has not been fully reflected in reality. Furthermore, the Design-VE occasionally does not progress in regular sequence; Preparation for measuring customer requirement - Function analysis - Idea creation. Therefore, this study suggests Axiomatic Design Theory to be adopted in Design-VE process expecting that the functions required by the customer could systematically reflected in VE process. Post-occupancy Evaluation(POE) is also represented as a method to measure and arrange the customer requirements. The customer satisfaction Design-VE process creates ideas defining functions in more detailed, to reflect the concrete user requirement. This approach helps function analysis and idea creation linked closely because function and idea are developed zigzag (i.e. function - idea - function...) in being decomposed into level down. The application of the process proposed by this study will be helpful to improve the customer requirement measurement and clarify a link between functions and ideas.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.164-170
• /
• 2017

The CNC machine tool field is showing a growing trend with the recent rapid development of manufacturing industries such as semiconductors, automobiles, medical devices, various inspection and test equipment, mechanical metal processing equipment, aircraft, shipbuilding and electronic equipment. However, small and medium-sized machining companies that use CNC machine tools are experiencing difficulties in increasingly intense competition. Especially, small companies which are receiving orders from 3rd or 4th venders are very difficult in business management. In recent years, company S experienced difficulty to make product quality and delivery time due to the ignorance of the processing method when manufacturing cooling plate jig made of SUS304 material used for cell phone liquid crystal glass processing. In order to solve these problems, we redesigned the process according to the size of our company and tried to manage all processes with quantified data. In the meantime, we have found that there is a need to improve the cutter process, which accounts for most of the machining process. Therefore, we have investigated the correlation between RPM and FEED of three cutters that have been used in the past. As a result, we found that it is the most urgent problem to solve the roughing process during the cutter operation which occupies more than 70% of the total machining. In order to shorten the machining time and improve the quality in machining of SUS304 cooling plate jig, we select the main factors such as price, tool life, maintenance cost, productivity, quality, RPM, and FEED and use AHP to find the most suitable milling cutter. We also tried to solve the problem of delivery, quality and production capacity which was a big problem of S company through experiment operation with selected cutter tool. As a result, the following conclusions were drawn. First, the most efficient of the three cutters currently available in the machining center has proven to be an M-cutter. Second, although one additional facility was required, it was possible to produce the existing facilities without additional investment by supplementing the lack of production capacity due to productivity improvement. Third, the Company's difficulties in delivery and capacity shortfalls have been resolved. Fourth, annual sales increased by KRW 109 million and profits increased by KRW 32 million annually. Fifth, it can confirm the usefulness of AHP method in corporate decision making and it can be utilized in various facility investment and process improvement in the future.

• Journal of Environmental Policy
• /
• v.8 no.4
• /
• pp.95-124
• /
• 2009

This study aims to introduce greenhouse gas emission trading in Korea as a highly cost-effective mechanism for controlling emissions. The Basic Act on Low-Carbon Green Growth will cover methods of emissions allocation, national inventory, and trading systems (i.e. emissions trading platforms, national registry,and clearing and settlement platforms). The Korean emission scheme will be based on the Korean Climate Change Act proposed by the National Assembly and Government with a cap-and-trade scheme. The national allowances will be allocated by the hybrid system. To establish the national inventory, TRADEMARKS (Telemetering System) and emissions factors are effective for greenhouse gas emissions measurement. It will likewise be effective for the national registry to be implemented via a Korean Integrated Registry, the emissions trading platform via the KRX (Korean Exchange), and the clearing and settlement platform via the KSD (Korean Securities Depository). In other words, the KRX will manage product development and marketing for Korean Carbon Financial Instruments (including commodities, futures, and options contracts) listed and admitted to trading on the KRX. All emissions trades will be standardized and cleared by the KSD.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.279-282
• /
• 2015

Fisheries development of the basic law pursuant to article 15 (marine safety management, etc.) one of maritime safety and maritime traffic facilities nationwide network of DGPS in accordance with the building maximize infrastructure utilization and country. Source technology has been improving steadily raised for the benefit daegukmin. In particular, look at the type of product for the marine supply medium-wave receiver Performance products that satisfy most of the IMO Advisory. The antenna and receiver are separate structural supply for some integrated model with a very high Rather it is used as a portable receivers for marine positioning cheap integrated model development is needed. Correction of satellite navigation receivers for the current Marine GPS module, medium-wave modules can be developed one low cost Integrated in independent operating environments do not support the model development done look at what the problem is 285kHz ~ 315kHz in DGPS Beacon receiver structure using a medium wave or Beacon The medium-wave antenna and a GPS receiver signal to noise ratio was studied GPS signal attenuation on the DGPS performance looked at each GPS manufacturer medium-wave signal-to-noise ratio and normalized impact by GPS manufacturers noise power ratio per bandwidth for medium-wave GPS signals affect it was implemented to improve performance.

• Resources Recycling
• /
• v.18 no.3
• /
• pp.55-61
• /
• 2009

Dewatering process to remove water from pigment sludge was important in the diverse aspects of the improvement of product quality, curtailment of the drying cost and the transportation. It was difficult to dewater pigment particles with the mechanical forces because the size was fine under $5{\mu}m$. Thermal filter press dewatering equipment composed of squeezing plate and a fixed heating plate was developed to improve the dewaterability of pigment the sludge as supplying the heat from the fixed heating plate to the cake. Several tests that estimate the dewaterability for pigment sludge as with or without squeezing process and the difference of dewatering time was conducted with this equipment. Dewaterability of thermal dewatering under squeezing process was increased about 20% compared with non squeezing process. Under squeezing process, thermal dewatering tests changing dewatering time with 70 and 80 minute were conducted respectively. The water content of cake was more reduced at dewatering time of 80 minute compared with 70 minute, and dewatering velocity was also decreased, which caused the productivity of thermal filter press to drop. It was observed that clogging of filter cloth didn't almost occur because the liquid was discharged from cake layer easily. In this research, it was resulted that the squeezing process and long dewatering time were effective to improve the dewaterability of pigment sludge. So, this thermal filter press equipment was useful for dewatering the fine particle sludge like pigment.

• KSBB Journal
• /
• v.11 no.6
• /
• pp.663-668
• /
• 1996

In the production of recombinant protein using E. coli, phage lysogen system can be usefully applied for simultaneously achieving protein production at high cell concentration and recovery by cell disruption in the same bioreactor. A major drawback of this system is that the intracellular product and complex broth components are mixed together in culture broth and hence purification efficiency is reduced. With the E. coli double-lysogen system, the expanded bed adsorption is very useful because the pretreatment processes in a routine bioseparation process can be done in a single column operation, and therefore may contribute towards lowering the operating cost of overall recovery/purification process. In the operation of EBA, it has been observed that the change in broth feed volume does not influence much the protein recovery in a tested range. The amount of protein adsorption per mL of resin was increased from $3.44{\times}106unit to 5.28{\times}106unit$ by doubling the column length. By two-fold increase of the column diameter, the ratio of protein concentration in eluent to that in feed was increased from 0.8 to 2.1. It is concluded from the present investigation that the increase of column length and diameter is necessary to enhance the protein adsorption amount per volume of resin and protein concentration in the eluent. The development of resins with various physical properties will be necessary for more extensive application of EBA.

• Management & Information Systems Review
• /
• v.35 no.2
• /
• pp.45-66
• /
• 2016

Firms can make scale of economy and scope of economy by internalizing and using new advanced technology and knowledge from technology cooperation network, decrease risk and cost with partner firm of technology cooperation network, and increase market advantage of product & strengthen firms' position in the market. Due to the advantages of technology cooperation network, the related studies have focused on the positive effect of technology cooperation network. However, the related studies investigating the relationship between technology cooperation network and firm performance have only examined the role of technology cooperation network. Safeguarding mechanism, relationship learning, and relationship performance are categorized into the process of technology cooperation network, and this categorization is applied as resources, capability, and performance by resource based view. The empirical results are reported as belows. First, relationship specific investment and relationship capital positively affect on relationship learning as capability. Second, information sharing, common information understanding, and relationship specific memory development positively affect on long-term orientation, but information sharing has no impact on efficiency and effectiveness. Third, relationship specific investment positively affects on relationship capital and efficiency and effectiveness have positive effects on long-term orientation. Applying technology cooperation network in asymmetric technology dependency with resource based theory, this study suggested the importance of both safeguarding and relationship learning by investigating the relationship among safeguarding, relationship learning, and relationship performance. And it is worthy that this study investigated how firms' behavior change affects relationship performance in the relationship of technology cooperation partner.

• The Journal of Fisheries Business Administration
• /
• v.1 no.2
• /
• pp.1-22
• /
• 1970

Our fisheries protucts industry has developed rapidly during past 10 years ; production was about twice: fihing fleets increased twice in number and 3 times in tonnage ; export was 5 times. Govermment is trying to develop deep sea fisheries in order to surmount the depression of coast fisheries. At present more than 270 deep sea fishing boats are working with superior skill to other country at the South Pacific, the Atlantic, the Indian, and the North Pacific Ocean. Our deep sea fisheries is consisted of the tuna long line and the trawler. The tuna long line of them has 230 crafts in 1969 ana the deep sea trawler has 40 crafts, too. Comparing to 1962, the number of the deep sea fishing boats has been increased highly to 54 times, 7.71 times average per year increasing rate. The rate of the tuna long line to the trawler at the end of 1969 shows 85:15, More than half of them are 100~200 (equation omitted), if we classify them according to (equation omitted) or boat craft. 70% of them has less than 5 years ships age. The Korean Marine Industry Development Corporation has more than 1/3 fishing fleets, with 91 crafts, if We consider it according to corporation. Considering it according to the financial resources, dependence upon foreign loan is as high as 88%. Catches was 74, 450 M/T ($24, 663, 000)at the end of November in 1969 and it was increased to 113.5 times in catch amount and 118 times in value, comparing to those of 1962. Considering it according to the ocean, the order is arranged to the Pacific, the Atlantic, and the Indian Ocean. The average production amount of each craft is 250~400 S/T a year. The result of export took up 1/3 of total fisheries product export with $ 22, 398, 000 at the end of november in 1969. Employee cost of fishing coast is 8% higher than other fishing. The profit is highest in our fisheries. Most of the products except the trawler fishing are sofa at the fishing grounds to the processing company, and they lose much money. They buy most of bait from Japan, giving $8~10 for 1C/S(10kg). Fish price is $390~520 according to the kind of fish for S/T at the fishing grounds, and the rapid frozen fishes brought to Japan are about $ 800 for S/T. There is much difference. in price. Problems 1. Want of self capital. 2. To get the refrigeration boats enough. 3. International Fishing Regulation. 4. To get high price and to secure consuming grounds. 5. To get home-production of bait. 6. To exploit new fishing grounds. 7. To get larger boats. 8. To get mariner enough. When the problems mentioned above are solved, the Deep Sea Fisheries of oun courtry will be developed more largely.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.147-156
• /
• 2011

Though a dozen of different software life cycle models are suggested, there is no universal model which can satisfy all the characteristics of software. Organizations mix and match different life cycle models to develop a model more tailored for their systems and capabilities. We suggest overlapped-concurrent development life cycle model that is more suitable in various software development environment. Firstly, we divided the development process into abstract and implementation stage. Abstract stage is from software concept phase to detailed design starting time, and implementation stage is from detailed design phase to system testing phase. Next, the abstract stage introduced the overlapped phase concept that begins the next phase when the step is completed 20% by applying pareto's law. In the implementation stage, we introduced the concurrent development which the several phases are performed some time as when one use-case (UC) is completed the next development phase is started immediately. The proposed model has an advantage that it can reduce the inefficiency of development resource greatly. This model can increase the customer satisfaction with a great product at a low cost and on a short schedule. Also, this model can contribute to increase the software development success rate.