• 제목/요약/키워드: processing type rice

검색결과 77건 처리시간 0.029초

Effects of Drying Condition and Binding Agent on the Quality Characteristics of Ground Dried-Pork Meat Products

  • Choi, Yun-Sang;Ku, Su-Kyung;Park, Jong-Dae;Kim, Hee-Ju;Jang, Aera;Kim, Young-Boong
    • 한국축산식품학회지
    • /
    • 제35권5호
    • /
    • pp.597-603
    • /
    • 2015
  • The purpose of this study was to investigate the influence of processing conditions (temperature and time) and binding agent types (glutinous rice flour, potato starch, bean flour, and acorn flour) on the physicochemical and sensory characteristics of ground dried-pork meat product. For this purpose, ground dried-pork meat product was produced by adding several binding agents at different drying temperatures and times. The drying time affected moisture content and water activity in all drying temperature. However, under the similar drying conditions, the extent of drying varied depending on the type of binding agents. The results of sensory evaluation for texture degree and overall acceptability indicated the following: overall, higher drying temperatures and longer drying time heightened the degree of texture, and the overall acceptability varied depending on binding agent type. Physicochemical and sensory characteristics were analyzed to determine any possible correlation. The results revealed a high correlation between moisture content, water activity, shear forces, and sensory evaluation (p<0.01). However, there was no correlation with respect to overall acceptability.

쌀 품질 고급화 및 고부가가치화를 위한 육종현황과 전망 (Current Status and Perspectives in Varietal Improvement of Rice Cultivars for High-Quality and Value-Added Products)

  • 최해춘
    • 한국작물학회지
    • /
    • 제47권
    • /
    • pp.15-32
    • /
    • 2002
  • 1980-'90년대에 쌀의 자급생산이 지속되고 생활수준 향상에 따른 양질미 수요가 점증되면서 자포니카 다수성 품종의 미질 개선에 힘을 크게 기울이게 되었고 식미향상을 위한 육종연구 와 효율적 평가 기술개발 연구에 박차를 가하게 되어 쌀의 이화학적 특성과 식미 및 밥 물리성간 상관과 식미의 객관적 평가방법 개발, 양식미 쌀 및 가공적성 특수미 개발 등 그 동안 많은 연구성과를 올리게 되었다. 1990년대에 밥맛이 매우 좋은 고품질 자포니카 품종과 대립, 심백미, 향미, 유색미 등 가공용 특수미 품종을 개발 보급하였고 식미와 용도에 대하여 식미검정계, 신속점도측정계 및 texture 분석계 등을 이용하여 검토하였다. 최근에는 아밀로스 함량이 9%로 찹쌀과 맵쌀의 중간 성질을 가진 중간찰 품종인 '백진주벼'와 배유가 보얀 멥쌀인 '설갱 벼'를 비롯하여 라이신 함량이 높은 '영안벼' 육성하여 쌀의 가공 이용성과 기능성을 한층 높혀 놓았다. 식미와 여러 가지 미질 특성간 관련성에 관한 연구 결과를 요약해 보면 다음과 같다. 쌀의 상온흡수율 및 최대흡수율은 K/Mg율 및 알칼리 붕괴도와 유의한 부의 상관성을 나타내었으며 가열흡수율이 높은 품종일수록 밥의 용적팽창률이 컸다. 수분함량이 낮은 경질인 쌀일수록 침지 20분 후의 상온흡수율과 최대흡수율이 더 높은 경향이었으며 이러한 흡수 특성은 쌀 단백질 함량이나 아밀로스 함량 및 식미와는 유의한 상관성이 없었다 취반 적정가수량은 품종에 따라 마른 쌀 무게의 1.45-l.61배의 변이를 나타내었고 평균은 1.52배였으며 알맞게 취사된 밥의 부피는 평균 쌀 부피의 2.63배가되었다. 쌀 형태, 알칼리붕괴도, 호응집성, 아밀로스 및 단백질 함량은 거의 비슷하지만 식미에 차이가 있는 자포니카 품종들을 사용하여 식미와 관련된 쌀의 이화학적 특성을 검토한 결과, 밥의 윤기와 식미 총평은 생산 연도에 따라 호화점도 특성 중 최고점도, 최저점도 및 응집점도와 밀접한 관계를 나타내었다. 밥맛이 가장 좋은 일품 벼는 쌀의 외층에 아밀로스 함량 분포가 낮고 쌀을 열탕에 담근 20분간 우러난 용출액의 요드 정색도가 낮고 증가정도도 완만하였다. 일품 벼는 밥맛이 떨어지는 동해 벼에 비해 밥알 횡단면의 주사형 전자현미경 사진에서 밥알 외층의 호화전분의 그 물망이 매우 치밀하고 속층의 전분립의 호화정도가 양호하였다. 식미총평은 식미관련 이화학적 특성과의 관계를 이용한 중회귀식에 의해 매우 높은 결정계수로 추정이 가능하였다. 밥노화의 품종간 차이는 α-amylase-iodine 법으로 비교할 수 있었는데 노화정도가 적었던 품종은 일품벼, 추청벼, 사사니시끼, 진부벼 및 고시히까리였다. 통일형 품종인 태백벼와 자포니카 품종 중 섬진벼가 비교적 밥노화가 빨랐다 일반적으로 밥맛이 좋은 품종이 밥의 노화정도가 느렸으며 찬밥의 탄력성이 큰 경향이었다. 또한 밥노화가 느렸던 품종은 최저점도가 높았고 최종점도가 낮았다 찬밥의 탄력성은 쌀의 마그네슘함량과 밥의 용적팽창률과 밀접한 관계를 나타내었다. 식은밥의 더운밥 대비 경도 변화율은 취반용출액의 고형물량과 취반용적 팽창률과 부의 상관을 나타내었다. 식미관련 주요 이화학적 특성은 밥의 노화와도 직접 간접으로 상관이 있는 것으로 평가되었다. 쌀의 여러 가지 식품 가공적성과 관련된 형태 및 이화학적 특성은 가공식품 종류에 따라 매우 다르다. 쌀 튀김성은 호응집성이 연질이거나 아밀로스 함량이 낮을수록 양호하며 지질함량이나 단백질 함량이 높으면 좋지 않은 경향이다. 심복백정도가 심할수록 튀김현미 정립률이 떨어지며 현미 강도가 높을수록 튀김률은 높은 경향이었다 쌀국수는 밀가루와 50% 혼합시에 쌀의 칼륨 및 마그네슘 함량이 높은 품종일수록 제면 총평이 낮은 경향이었고 제면이 양호한 것이 국수물의 용출고형 물량이 적은 경향이었다. 쌀빵 가공적성은 품종에 따라서 현미와 백미간에 현저한 차이를 나타내는 것이 있는데 현미에서 반죽의 부피 증가율이 큰 쌀일수록 푹신한 감이 있는 쌀방 제조가 가능하였으며 백미에서 단백질 함량이 높은 품종일수록 쌀빵이 더욱 촉촉한 느낌이 있는 경향이었다. 아밀로스 함량이 높고 호응집성이 경질인 쌀일수록 쌀빵의 탄력성이 더 높은 경향이었다. 쌀의 발효 및 양조적성은 심복백이 심한 쌀이나 새로운 돌연변이인 뽀얀 멥쌀이 홍국균이나 홍국균의 균사활착 밀도가 높고 당화 효소 역가도 높은 경향이었으며 쌀알이 대립이면서 단백질 함량이 낮은 쪽이 양조에 유리한 것으로 알려져 있다. 찰벼 품종도 여러 가지 이화학적 특성과 전분구조 특성의 차이에 따라 9개의 품종군으로 나누어 볼 수 있을 만큼 품종적 변이가 크며 이들 이화학적 및 구조적 특성간에 상호 밀접한 연관성을 나타내었으며 유과·인절미·식혜ㆍ미숫가루 등에 상당한 가공적성의 차이를 보였다. WTO 체제 출범이후 생산비와 가격 면에서 경쟁력이 약한 우리 쌀이 살아남기 위해서는 품질의 고급화와 쌀 가공식품의 다양화 및 고기능성 개발을 추구할 수밖에 없다. 따라서 이와 같은 노력은 벼 품종개발만으로 소기의 성과를 올리기 어렵고 쌀 식품의 고급화 및 다양화를 위한 여러 분야의 긴밀한 연구협력이 수반되지 않으면 안 된다.

가공 방법이 다른 쌀가루 혼합 빵의 제빵성과 관능적 품질 특성 (Bread Property and Sensory Quality of Differently Processed Rice Flour Compounded Bread)

  • 조숙자
    • 한국지역사회생활과학회지
    • /
    • 제12권1호
    • /
    • pp.69-85
    • /
    • 2001
  • The purpose of this study was to replace the highly imported wheat consumption with rice in order to improve the rate of food self-sufficiency. Also, the study focused on the possibility of compounded bread making with rice flour, its taste for the Korean who have westernized eating styles, and the development of rice flour compounded bread as an alternative for wheat allergic people. Therefore, the researcher produced the soaked-rice flour, toasted-rice flour, and Extrusion-Expansion of Rice (E-ER) flour by different processing methods to bake rice wheat bread with the 10~50% mixing proportion. The volume and structure of bread were observed with Scanning Electron Microscope (SEM), and the sensory quality and the baking property were analyzed with a seven-point Likert type scale of Quantitative Descriptive Analysis (QDA). The sensory quality consisted of seven qualities such as color, size and distribution of air cell, flavor, softness, chewing, and overall quality that were evaluated as higher rating showed the better quality. The results of this study are: 1. The volume of the three types of rice wheat bread was almost same or bigger than wheat bread with the 20% of mixed proportion. 2. The size and distribution of air cell of E-ER wheat bread observed by SEM were more evenly distributed that toasted-rice wheat bread. The E-ER wheat bread had soft structure and was relatively similar to wheat flour bread. However, the structure of soaked-rice wheat bread was significantly different to other types of rice wheat bread. The structure of 10% mixed all three types of rice wheat bread was similar and evenly distributed to wheat bread but was bigger and coarser as higher mixing proportion of rice flour. 3. The dark brown color of rice wheat bread showed low sensory quality. 4. Both soaking-rice flour and E-ER flour were able to be mixed with wheat flour up to the 50%, and the seven sensory quality of these wheat bread were better than those of wheat bread. Among the three types of rice flour, toasted-rice wheat bread showed low bread property and sensory quality compared to soaked-rice or E-ER wheat bread. Consequently, this study showed that rice wheat bread that contains 20~30% of rice flour was better than wheat bread in the appropriate volume, seven sensory qualities and bread property.

음료 개발을 위한 가공용 쌀의 수화, 호화 및 당화특성 비교 (Comparison of the Hydration, Gelatinization and Saccharification Properties of Processing Type Rice for Beverage Development)

  • 신동선;최예지;심은영;오세관;김시주;이석기;우관식;김현주;박혜영
    • 한국식품영양학회지
    • /
    • 제29권5호
    • /
    • pp.618-627
    • /
    • 2016
  • 쌀음료베이스 개발을 위한 품종별 가공용 쌀의 기초자료 확보를 위해 국내산 쌀 7종(삼광, 일품, 설갱, 안다, 다산1호, 고아미4호, 단미)과 수입쌀 3종(미국쌀, 중국쌀, 태국쌀)을 대상으로 수화, 호화 및 당화 관련 특성을 살펴보았다. 품종별쌀의 수분함량은 11.88~15.26% 범위로 나타났으며, 수분흡수율은 안다, 미국쌀이 가장 높게 나타났다. 수분결합력은 태국쌀이 가장 높았으며, 단미, 고아미4호 및 설갱은 낮은 수분결합력을 나타내었다. 용해도는 10종의 시료 중 단미가 월등히 높은 26.6%를 나타내었으며, 팽윤력은 설갱, 안다, 미국쌀이 유의적으로 높은 수준을 나타냈다(p<0.05). 품종별 쌀가루의 아밀로오스 함량은 고아미4호와 태국쌀이 가장 높은 반면, 단미가 가장 낮았다. RVA를 측정한 결과, 호화온도는 단미와 고아미4호가 각각 $91.6^{\circ}C$$78.5^{\circ}C$로 가장 높았고, 그 외 품종은 $68.0{\sim}71.1^{\circ}C$로 나타났다. 최고점도와 최종점도는 다산1호가 가장 높았고, 단미가 가장 낮게 나타났다. 치반점도는 일품과 미국쌀이 낮게 나타나, 노화가 더디게 진행될 것으로 예상되었다. 한편, 쌀, 수침처리 쌀, 건식쌀가루, 습식쌀가루로 가공용 쌀 전처리를 달리하고, 수침시 흡수되는 수분량을 고려하여 물을 첨가하고, 고온용 ${\alpha}$-amylase 처리 후 당화특성을 비교하였다. 당화액의 pH는 일품을 제외한 모든 품종에서 습식쌀가루가 유의적으로 높게 나타났다(p<0.05). 가용성 고형분 함량은 대부분 수침처리한 것보다 수침처리하지 않는 것, 쌀보다는 쌀가루의 효소처리가 더 효과적으로 높게 나타났다. 환원당 함량은 전처리 방법에 따라 수침처리하지 않는 것보다 수침처리한 것, 쌀보다는 쌀가루가 유의적으로 더 높게 나타났다(p<0.05). 색도는 L값의 경우 고아미4호를 제외한 대부분 품종에서 쌀보다 수침처리한 쌀이 낮은 값을 보였다. a값은 수침처리하지 않는 쌀과 습식쌀가루에서 낮은 값을 보였으며, b값은 쌀보다 수침처리한 쌀, 건식쌀가루보다 습식쌀가루가 품종에 따라 다소 차이가 있는 것으로 나타났다(p<0.05). 이러한 연구결과를 종합해 보면, 쌀을 원료로 한 음료베이스 개발을 위해서는 원료곡의 호화, 액화 및 당화에 영향을 주는 여러 가지 인자와 품종별 특성을 고려한 접근이 이루어져야 할 것이다.

드래찬 쌀 품종의 도정도를 달리한 쌀가루의 이화학적 특성 (The Physicochemical Characteristics of Rice Flour with Different Milling Degree of Rice Cultivar "Deuraechan")

  • 정희남;최옥자
    • 한국식품조리과학회지
    • /
    • 제30권2호
    • /
    • pp.139-145
    • /
    • 2014
  • 본 연구는 가공용 쌀의 활용을 위한 기초자료를 마련하고자 초다수성 가공용 쌀인 드래찬을 현미, 3분도미, 5분도미, 7분도미, 백미로 각각 도정하여 쌀가루의 이화학적 특성을 분석하였다. 도정도에 따른 드래찬 쌀의 수분 함량은 12.92~13.07%, 조단백 함량은 6.62~8.47%, 조지방 함량은 0.84~2.52%, 조회분 함량은 0.51~1.17% 그리고 조섬유 함량은 0.30~1.16%로 나타났으나, 수분 함량에서는 유의한 차이가 없었다. 쌀가루의 색도에서 L값은 88.08~93.72로 백미에서 가장 높았고, a값과 b값은 현미에서 가장 높았다. 쌀가루의 수분결합력은 백미가 127.44%로 가장 높았고, 현미가 114.31%로 가장 낮았다. Amylogram 호화특성에서는 백미가 최고점도, 냉각점도, breakdown 및 setback에서 가장 높게 나타났다. 시차열량 주사계에 의한 호화엔탈피 측정 결과, 호화개시온도는 $63.49{\sim}65.75^{\circ}C$이고, 호화정점온도는 $70.72{\sim}73.10^{\circ}C$, 호화종료온도는 $77.99{\sim}79.58^{\circ}C$이었고, 호화엔탈피는 현미에서 9.98 J/g으로 가장 낮게 나타났다.

Extrusion 제조 조건에 따른 쌀 스낵 제품의 이화학적 품질특성 (Physicochemical Properties of Rice-based Expanded Snacks according to Extrusion Conditions)

  • 은종방;;최옥자
    • 한국식품영양과학회지
    • /
    • 제43권9호
    • /
    • pp.1407-1414
    • /
    • 2014
  • 쌀가루, 고아밀로오스 전분, 분리대두단백, 설탕 및 소금을 첨가하여 feed 수분함량 19~23%, screw speed 200~400 rpm, feed rate 43.6 kg/hr 조건에서 제조한 쌀 스낵의 이화학적 특성을 분석한 결과는 다음과 같다. 쌀 스낵의 bulk density는 0.06~0.21, apparent density는 0.55~0.65 정도로 나타났고, feed 수분함량이 많을수록, screw 속도가 감소할수록 증가하는 경향을 보였다. 쌀 스낵의 팽화율은 density와는 반대로 feed 수분함량이 낮을수록, screw 속도가 증가할수록 증가하였다. 쌀 스낵의 WAI는 feed 수분함량이 많을수록, screw 속도가 감소할수록 증가한 반면, WSI는 WAI와는 반대의 경향을 나타냈다. 쌀 스낵의 breaking strength는 feed 수분함량이 증가할수록, screw 속도가 감소할수록 증가하였다. 쌀 스낵의 색도 중 L값은 feed 수분함량 19%, 21%에서는 screw 속도가 증가할수록 L값은 낮았으나, feed 수분함량 23%에서는 screw 속도에 따른 유의적인 차이는 없었다. a, b값은 feed 수분함량 19%에서는 screw 속도가 증가함에 따라 높아졌다. 쌀 스낵의 x-ray 회절도는 feed 수분함량이 낮을수록, screw 속도가 높을수록 회절강도가 낮게 나타났고, feed 수분함량 19%, 21%, screw 속도 300 및 400 rpm에서는 V 도형의 특징을 나타냈다. 쌀 스낵의 내부 단면구조는 feed 수분함량이 많을수록, screw 속도가 낮을수록 기공의 생성이 잘 되지 않았고 세포벽이 두껍게 나타났다.

가교화 찹쌀전분의 물리화학적 성질 및 유과제조 특성 (Physicochemical Properties of Cross-linked Waxy Rice Starches and Its Application to Yukwa)

  • 유철;최현욱;김종태;안순철;최성원;김병용;백무열
    • 한국식품과학회지
    • /
    • 제39권5호
    • /
    • pp.534-540
    • /
    • 2007
  • 유과 제조 시 제조 시간을 단축할 수 있는 소재를 개발하기 위하여 찹쌀전분을 $POCl_3$와 반응시켜 가교화 찹쌀전분을 제조하고 이들의 물리화학적 특성을 연구하였다. 가교화 찹쌀전분의 치환율은 0.04-2.73으로 나타났으며, 팽윤력은 일반 찹쌀전분에 비해 약간 증가되는 경향을 보였으며 용해도는 일반 찹쌀전분보다 낮은 경향을 보였다. 등온흡습곡선은 가교화에 따른 유의적인 차이를 보이지 않았다. 전분의 pasting 특성을 검토한 결과, 호화개시온도는 가교화에 따른 변화가 없는 것으로 나타났으며, 최대점도, holding strength, final viscosity, setback은 일반 찹쌀전분보다 높아지는 결과를 나타냈다. 열적특성은 호화개시온도, 최대호화온도, 호화종결온도 그리고 호화엔탈피 모두 각 전분간에 유의적인 차이가 나타나지 않았다. X-ray회절 분석 결과로 볼 때, 가교화 찹쌀전분 및 일반 찹쌀전분 모두 A형의 결정 형태를 나타내었고, 상대적 결정화도의 차이가 나타나지 않는 것으로 보아 가교화가 찹쌀전분의 결정형영역에는 영향을 주지 않는 것으로 보여진다. 가교화 찹쌀전분을 사용하여 제조한 유과의 경우 일반 찹쌀을 장시간 침지한 후 제조한 시료와 비슷한 팽화율을 나타내었으며 시료의 변색 반응이 나타나지 않는 것으로 보아 유과 제조용 소재로서 적합한 것으로 판단되었다.

하이드록시프로필화 찹쌀 전분의 이화학적 성질 및 유과제조 특성 (Physicochemical Properties of Hydroxypropylated Waxy Rice Starches and its Application to Yukwa)

  • 유철;최현욱;김종태;김동섭;최성원;박영준;백무열
    • 한국식품과학회지
    • /
    • 제38권3호
    • /
    • pp.385-391
    • /
    • 2006
  • 유과 제조 시 제조 시간을 단축할 수 있는 소재를 개발하기 위하여 찹쌀 전분을 propylene oxide(PO)와 반응시켜 하이드록시프로필화 찹쌀 전분을 제조하고 이들의 이화학적 특성을 연구하였다. 하이드록시프로필화 찹쌀 전분의 치환율은 0.013-0.115% 정도로 나타났으며, 팽윤력 및 용해도는 일반 찹쌀 전분에 비해 약간 증가되는 경향을 보였다. 등온흡습곡선에서는 하이드록시프로필화에 따른 유의적인 차이를 보이지는 않았다. Rapid Visco Analyzer(RVA)특성을 검토한 결과, 호화개시온도는 하이드록시프로필화에 따른 변화가 없는 것으로 나타났으며, 최대 점도, holding strength, final viscosity는 일반 찹쌀 전분보다 높아지는 결과를 나타냈다. 열적특성에서는 호화개시온도, 호화종결온도 그리고 호화온도범위$({\Delta}T)$는 각 전분간에 유의적인 차이가 나타나지 않았으나 최대호화온도와 증가된 결과을 보여주었다. X-ray 회절 분석 결과로 볼 때, 하이드록시프로필화 찹쌀 전분 및 일반 찹쌀 전분 모두 A형의 결정 형태를 나타내었고, 상대적 결정화도의 차이가 나타나지 않는 것으로 보아 하이드록시프로필화가 찹쌀 전분의 결정형영역에는 영향을 주지 않는 것으로 보여진다. 하이드록시프로필화 찹쌀 전분을 사용하여 제조한 유과의 경우 일반 찹쌀을 장시간 침지 후 제조한 사료보다 낮은 팽화율과 색의 변화를 나타내어 유과제조용 소재로서는 부적합한 것으로 판단되었다.

The cloning and characterization of the small GTP-binding Protein RacB in rice.

  • Jung, Young-Ho;Jaw, Nam-Soo
    • 한국식물병리학회:학술대회논문집
    • /
    • 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
    • /
    • pp.81.2-82
    • /
    • 2003
  • Plants have evolved along with pathogens, and they have developed sophisticated defense systems against specific microorganisms to survive. G-protons are considered one of the upstream signaling components working as a key for the defense signal transduction pathway. For activation and inactivation of G-protein, GTP-biding proteins are involved. GTP -binding proteins are found in all organisms. Small GTP-binding proteins, having masses of 21 to 30kD, belong to a superfamily, often named the Ras supefamily because the founding members are encoded by human Ras genes initially discovered as cellular homologs of the viral ras oncogene. Members of this supefamily share several common structural features, including several guanine nucleotide binding domains and an effector binding domain. However, exhibiting a remarkable diversity in both structure and function. They are important molecular switches that cycle between the GDP-bound inactive form into the GTP-bound active form through GDP/GTP replacement. In addition, most GTP-binding proteins cycle between membrane-bound and cytosolic forms. such as the RAC family are cytosolic signal transduction proteins that often are involved in processing of extracellular stimuli. Plant RAC proteins are implicated in regulation of plant cell architecture secondary wall formation, meristem signaling, and defense against pathogens. But their molecular mechanisms and functions are not well known. We isolated a RacB homolog from rice to study its role of defense against pathogens. We introduced the constitutively active and the dominant negative forms of the GTP-hinging protein OsRacB into the wild type rice. The dominant negative foms are using two forms (full-sequence and specific RNA interference with RacB). Employing southern, and protein analysis, we examine to different things between the wild type and the transformed plant. And analyzing biolistic bombardment of onion epidermal cell with GFP-RacB fusion protein revealed association with the nucle.

  • PDF

우리나라 양곡가공공장의 현황분석 (The Profile of Milling Plants in Korea)

  • 정창주;금동혁;강화석
    • Journal of Biosystems Engineering
    • /
    • 제3권1호
    • /
    • pp.47-63
    • /
    • 1978
  • This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

  • PDF