• Applied Microscopy
• /
• v.45 no.3
• /
• pp.131-134
• /
• 2015

Here we show how by processing energy dispersive X-ray spectrometry (EDS) data obtained using highly sensitive, new generation EDS detectors in the AZtec LayerProbe software we can obtain data of sufficiently high quality to non-destructively measure the number of layers in two-dimensional (2D) $MoS_2$ and $MoS_2/WSe_2$ and thereby enable the characterization of working devices based on 2D materials. We compare the thickness measurements with EDS to results from atomic force microscopy measurements. We also show how we can use electron backscatter diffraction (EBSD) to address fabrication challenges of 2D materials. Results from EBSD analysis of individual flakes of exfoliated $MoS_2$ obtained using the Nordlys Nano detector are shown to aid a better understanding of the exfoliation process which is still widely used to produce 2D materials for research purposes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.718-720
• /
• 2017

IT convergence with agriculture and livestock farming are expected to bring more efficiency and quality improvement in producing, distributing, consuming of agricultural products with the aid of information processing and autonomous control technologies of the IT area. In this paper, it is analyzed reference model and consider the actualized IT convergence case for agriculture and livestock, namely Smart Farming and Smart livestock Farming as a solution to cope the presented problems.

• Transactions of Materials Processing
• /
• v.12 no.5
• /
• pp.465-472
• /
• 2003

Engineering design can be viewed as a decision making process, which involves the nonlinear tradeoffs task among the multiple conflicting attributes and considers the robustness of design. In order to obtain best engineering design, methodology for accurate assessment of his/her preference about the multiple attributes is required. Conventionally, intuitive procedures based on lottery questions are used to elicit the designer's preference structure: however, they can lead to inconsistent and inexact preference results due to the rank reversal problems derived from the designer's big cognitive burden. In this paper, alternatively, a design methodology based on multiattribute utility function through the pairwise comparison among alternatives is presented. The proposed procedure is applied to an actual injection mold design with the aid of the CAE simulation and the result is discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.591-594
• /
• 2014

IT Convergence with agriculture is expected to bring more efficiency and quality improvement in producing, distributing, consuming of agricultural products with the aid of information processing and autonomous control technologies of the IT area. However, there exist many difficulties to establish services and systems to actualize the IT convergence service in the agricultural field to cope with various objects such as time-varying weather changes, growth condition of farm products, and continual diseases. In this paper, we suggest standard technology service requirements for ubiquitous environments agriculture based on network.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.500-503
• /
• 2016

IT convergence with agriculture and livestock farming are expected to bring more efficiency and quality improvement in producing, distributing, consuming of agricultural products with the aid of information processing and autonomous control technologies of the IT area. In this paper, it is analyzed strategy item and consider the actualized IT convergence case for agriculture and livestock, namely Smart Farming and Smart livestock Farming as a solution to cope the presented problems. In addition, suggest to ICT standardization road map for future planning.

• Journal of Biomedical Engineering Research
• /
• v.19 no.1
• /
• pp.59-68
• /
• 1998

Digital hearing aids offer many advantages over conventional analog hearing aids. With the advent of high speed digital signal processing chips, new digital techniques have been introduced to digital hearing aids. In addition, the evaluation of new ideas in hearing aids is necessarily accompanied by intensive subject-based clinical tests which requires much time and cost. In this paper, we present an objective method to evaluate and predict the performance of hearing aid systems without the help of such subject-based tests. In the hearing impairment simulation(HIS) algorithm, a sensorineural hearing impairment medel is established from auditory test data of the impaired subject being simulated. Also, the nonlinear behavior of the loudness recruitment is defined using hearing loss functions generated from the measurements. To transform the natural input sound into the impaired one, a frequency sampling filter is designed. The filter is continuously refreshed with the level-dependent frequency response function provided by the impairment model. To assess the performance, the HIS algorithm was implemented in real-time using a floating-point DSP. Signals processed with the real-time system were presented to normal subjects and their auditory data modified by the system was measured. The sensorineural hearing impairment was simulated and tested. The threshold of hearing and the speech discrimination tests exhibited the efficiency of the system in its use for the hearing impairment simulation. Using the HIS system we evaluated three typical hearing aid algorithms.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.8
• /
• pp.1209-1223
• /
• 2009

In this review, the terminology that is used to describe ileal amino acid (AA) digestibilities in piglet feed ingredients is defined. If one accepts that the determination of AA digestibilities should be based on the ileal analysis method, one should consider that ileal digesta contains variable amounts of endogenous crude protein (CP), which originates mainly from digestive secretions, sloughedoff epithelial cells and mucins. The ileal endogenous CP and AA losses are separated into basal ileal endogenous CP and AA losses ($IAAL_{B}$), which are not influenced by the feed ingredient composition, and specific ileal endogenous CP and AA losses ($IAAL_{S}$), which are induced by feed ingredient characteristics such as level and type of fiber and anti-nutritional factors (ANF). Depending how ileal endogenous CP and AA losses are considered in the measurement of CP and AA digestibilities, digestibility values are expressed as apparent (AID), standardized (SID), or true (TID) ileal digestibilities of CP and AA. The main concern associated with the use of AID values in diet formulation for pigs is that they are not additive in mixtures of feed ingredients. Consequently, the concept of standardized ileal CP and AA digestibilities was introduced by correcting AID values for basal ileal endogenous CP and AA losses ($IAAL_{B}$). The correction for both $IAAL_{B}$ and $IAAL_{S}$ yields TID values, however, routine procedures to measure $IAAL_{S}$ are not yet available. In principle, SID values should be preferred, because they represent the fundamental properties of the feed ingredient. There exist only few reports on SID of CP and AA in feedstuffs frequently used in piglet nutrition. These include soybeans (SB), soybean meal (SBM), soy proteins (SP), soy protein concentrate (SPC), soy protein isolate (SPI), corn gluten (CG), wheat gluten (WG), pea protein (PeaP), potato protein (PotP), fish meal (FM) and whey proteins (WP), but the results obtained are inconsistent. Differences in SID values within feed ingredients may, at least in part, be attributed to different processing conditions or inherent differences of the assay feed ingredients. Moreover, there is some evidence that the determination of SID values and $IAAL_{B}$ in piglets may be confounded by the dietary CP level of the assay diet, age and (or) body weight (BW), the level of feed intake or the methodological approach used to determine $IAAL_{B}$.

• Journal of Korean Society of Forest Science
• /
• v.68 no.1
• /
• pp.1-10
• /
• 1985

This study was carried to analyze the structural change of interrelationships between the forestry including forest product processing and the other industrial sectors. The interindustry tables (19 setors) were drawn with the aid of the interindustry table published in 1970, 1975 and 1980 in connection with the forestry and forest product processing. In addition, the input coefficient and inverse matrix coefficient were calculated in the light of the 19 sector of interindustry tables. Owing to the change of economic structure during the period of 1970-1980, the importance of forest in Gross National Product has been decreasing. But it has shown that forestry is a kind of original industry having a great deal of intermediate demand which is constantly increasing. Therefore, forestry could be regarded as a supply industry to other industries. In addition, the import coefficient of forestry products in larger than that of other industries and it keeps increasing.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.623-631
• /
• 2000

Advanced Life Support Systems (ALSS) are being studied to support human life during long-duration space missions. ALSS can be categorized into four subsystems: Crew, Biomass Production, Food Processing and Nutrition, Waste Processing and Resource Recovery. The System Studies and Modeling (SSM) team of New Jersey-NASA Specialized Center of Research and Training (NJ-NSCORT) has facilitated and conducted analyses of ALSS to address systems level issues. The underlying concept of the SSM work is to enable the effective utilization of information to aid in planning, analysis, design, management, and operation of ALSS and their components. Analytical tools and computer models for ALSS analyses have been developed and implemented for value-added information processing. The results of analyses have been delivered through the Internet for effective communication within the advanced life support (ALS) community. Several modeling paradigms have been explored by developing tools for use in systems analysis. They include object-oriented approach for top-level models, procedural approach for process-level models, and application of commercially available modeling tools such as MATLAB$\^$(R)//Simulink$\^$(R)/. Every paradigm has its particular applicability for the purpose of modeling work. An overview is presented of the systems studies and modeling work conducted by the NJ-NSCORT SSM team in its efforts to provide systems analysis capabilities to the ALS community. The experience gained and the analytical tools developed from this work can be extended to solving problems encountered in general agriculture.

• Agricultural and Biosystems Engineering
• /
• v.2 no.2
• /
• pp.41-49
• /
• 2001

Advanced Life Support Systems(ALSS) are being studied to support human life during long-duration space missions. ALSS can be categorized into four subsystems: Crew, Biomass Production, Food Processing and Nutrition, Waste Processing and Resource Recovery. The System Studies and Modeling (SSM) team of New Jersey-NASA Specialized Center of Research and Training (NJ-NSCORT) has facilitated and conducted analyses of ALSS to address systems level issues. The underlying concept of the SSM work is to enable the effective utilization of information to aid in planning, analysis, design, management, and operation of ALSS and their components. Analytical tools and computer models for ALSS analyses have been developed and implemented for value-added information processing. The results of analyses heave been delivered through the internet for effective communication within the advanced life support (ALS) community. Several modeling paradigms have been explored by developing tools for use in systems analysis. they include objected-oriented approach for top-level models, procedureal approach for process-level models, and application of commercially available modeling tools such as $MATLAB^{R}$/$Simulink^{R}$. Every paradigm has its particular applicability for the purpose of modeling work. an overview is presented of the systems studies and modeling work conducted by the NJ-NSCORT SSM team in its efforts to provide systems analysis capabilities to the ALS community. The experience gained and the analytical tools developed from this work can be extended to solving problems encountered in general agriculture.